fet140_ta_pwm02.c

msp430f14x 系列片内外设的实例代码

//*******************************************************************************
//  MSP-FET430P140 Demo - Timer_A PWM TA1-2 upmode, 32kHz ACLK
//
//  Description; This program will generate a two PWM outputs on P1.2/1.3 using
//  Timer_A in an upmode.  The value in CCR0, defines the period and the 
//  values in CCR1 and CCR2 the duty PWM cycles.  Using 32kHz ACLK as TACLK,
//  the timer period is 15.6ms with a 75% duty cycle on P1.2 and 25% on P1.3. 
//  ACLK = TACLK = LFXT1 = 32768, MCLK = SMCLK = default DCO ~ 800kHz. 
//  Normal mode LPM3
//  //*External watch crystal installed on XIN XOUT is required for ACLK*//	  
//
//               MSP430F149
//            -----------------
//        /|\|              XIN|-  
//         | |                 | 32k
//         --|RST          XOUT|-
//           |                 |
//           |             P1.2|--> CCR1 - 75% PWM
//           |             P1.3|--> CCR2 - 25% PWM
//
//  M.Buccini
//  Texas Instruments, Inc
//  September 2003
//  Built with IAR Embedded Workbench Version: 1.26B
//  January 2004
//  Updated for IAR Embedded Workbench Version: 2.21B
//******************************************************************************

#include <msp430x14x.h>

void main(void)
{ 
  WDTCTL = WDTPW + WDTHOLD;             // Stop WDT
  P1DIR |= 0x0C;                        // P1.2 and P1.3 output
  P1SEL |= 0x0C;                        // P1.2 and P1.3 TA1/2 otions
  CCR0 = 512-1;                         // PWM Period
  CCTL1 = OUTMOD_7;                     // CCR1 reset/set
  CCR1 = 384;                           // CCR1 PWM duty cycle
  CCTL2 = OUTMOD_7;                     // CCR2 reset/set
  CCR2 = 128;                           // CCR2 PWM duty cycle
  TACTL = TASSEL_1 + MC_1;              // ACLK, up mode
  
  _BIS_SR(LPM3_bits);                   // Enter LPM3
}