usbf_utmi_ls.v

完整的usb freecore

	if(!T1_gt_5_0_mS && ps_cnt_clr)			idle_cnt1 <= idle_cnt1_next;

always @(posedge clk)
	idle_cnt1_next <= idle_cnt1 + 8'h1;

always @(posedge clk)		// Clear the uS counter every 62.5 uS
	idle_cnt1_clr <= idle_cnt1 == `USBF_T1_C_62_5_US;

always @(posedge clk)	// Greater Than 2.5uS (Actual Time will be T0+2.75uS)
	T1_gt_2_5_uS <= !idle_cnt_clr & (idle_cnt1 > `USBF_T1_C_2_5_US);

always @(posedge clk)	// Smaller Than 3 mS (Actual Time will be 0-2.9375mS)
	T1_st_3_0_mS <= !idle_cnt_clr & (idle_cnt1 < `USBF_T1_C_3_0_MS);

always @(posedge clk)	// Greater Than 3 mS (Actual Time will be T0+3.0625mS)
	T1_gt_3_0_mS <= !idle_cnt_clr & (idle_cnt1 > `USBF_T1_C_3_0_MS);

always @(posedge clk)	// Greater Than 3.125 mS (Actual Time will be T0+3.1875uS)
	T1_gt_3_125_mS <= !idle_cnt_clr & (idle_cnt1 > `USBF_T1_C_3_125_MS);

always @(posedge clk)	// Greater Than 3.125 mS (Actual Time will be T0+3.1875uS)
	T1_gt_5_0_mS <= !idle_cnt_clr & (idle_cnt1 > `USBF_T1_C_5_MS);

// ---------------------------------------------------------
// Misc Events Counter

// Pre-scaler - 2.5uS
always @(posedge clk)
	if(me_cnt_clr || me_ps_2_5_us)		me_ps <= 8'h0;
	else					me_ps <= me_ps + 8'h1;

always @(posedge clk)	// Generate a pulse every 2.5 uS
	me_ps_2_5_us <= (me_ps == `USBF_T2_C_2_5_US);

// Second Pre-scaler - 0.5mS
always @(posedge clk)
	if(me_cnt_clr || me_ps2_0_5_ms )	me_ps2 <= 8'h0;
	else
	if(me_ps_2_5_us)			me_ps2 <= me_ps2 + 8'h1;

always @(posedge clk)	// Generate a pulse every 0.5 mS
	me_ps2_0_5_ms <= (me_ps2 == `USBF_T2_C_0_5_MS) & !me_ps2_0_5_ms;

// final misc Counter
always @(posedge clk)
	if(me_cnt_clr)				me_cnt <= 8'h0;
	else
	if(!me_cnt_100_ms && me_ps2_0_5_ms)	me_cnt <= me_cnt + 8'h1;

always @(posedge clk)	// Indicate when 100uS have passed
	T2_gt_100_uS <= !me_cnt_clr & (me_ps2 > `USBF_T2_C_100_US);	// Actual Time: 102.5 uS

always @(posedge clk)	// Indicate when wakeup period has passed
	T2_wakeup <= !me_cnt_clr & (me_cnt > `USBF_T2_C_WAKEUP);

always @(posedge clk)	// Indicate when 1 mS has passed
	T2_gt_1_0_mS <= !me_cnt_clr & (me_cnt > `USBF_T2_C_1_0_MS);	// Actual Time: 1.5 mS

always @(posedge clk)	// Indicate when 1.2 mS has passed
	T2_gt_1_2_mS <= !me_cnt_clr & (me_cnt > `USBF_T2_C_1_2_MS);	// Actual Time: 1.5 mS

always @(posedge clk)	// Generate a pulse after 100 mS
	me_cnt_100_ms <= !me_cnt_clr & (me_cnt == `USBF_T2_C_100_MS); // Actual Time: 100 mS

// ---------------------------------------------------------
// Chirp Counter

always @(posedge clk)
	if(chirp_cnt_clr)	chirp_cnt <= 3'h0;
	else
	if(chirp_cnt_inc)	chirp_cnt <= chirp_cnt + 3'h1;

always @(posedge clk)
	chirp_cnt_is_6 <= (chirp_cnt == 3'h6);

///////////////////////////////////////////////////////////////////
//
// Main State Machine
//

`ifdef USBF_ASYNC_RESET
always @(posedge clk or negedge rst)
`else
always @(posedge clk)
`endif
	if(!rst)		state <= POR;
	else
	if(usb_vbus)		state <= POR;
	else			state <= next_state;

always @(state or mode_hs or idle_long or resume_req_s or me_cnt_100_ms or
	j_long or k_long or se0_long or ls_se0 or
	T1_gt_2_5_uS or T1_st_3_0_mS or T1_gt_3_0_mS or
	T1_gt_5_0_mS or T2_gt_100_uS or T2_wakeup or T2_gt_1_0_mS or
	T2_gt_1_2_mS or chirp_cnt_is_6)
   begin
	next_state = state;	// Default don't change state

	mode_set_hs = 1'b0;
	mode_set_fs = 1'b0;
	suspend_set = 1'b0;
	suspend_clr = 1'b0;
	attached_set = 1'b0;
	attached_clr = 1'b0;
	usb_reset_d = 1'b0;

	fs_term_on = 1'b0;
	fs_term_off = 1'b0;
	xcv_set_hs = 1'b0;
	xcv_set_fs = 1'b0;
	bit_stuff_on  = 1'b0;
	bit_stuff_off = 1'b0;

	idle_cnt_clr = 1'b0;
	me_cnt_clr = 1'b0;
	drive_k_d = 1'b0;
	chirp_cnt_clr = 1'b0;
	chirp_cnt_inc = 1'b0;

	case(state)	// synopsys full_case parallel_case
	   POR:		// Power On/Reset
	     begin
		me_cnt_clr = 1'b1;
		xcv_set_fs = 1'b1;
		fs_term_on = 1'b1;
		mode_set_fs = 1'b1;
		attached_clr = 1'b1;
		bit_stuff_on  = 1'b0;
		suspend_clr = 1'b1;
		next_state = ATTACH;
	     end

	   NORMAL:	// Normal Operation
	     begin
		if(!mode_hs && T1_gt_2_5_uS && T1_st_3_0_mS && !idle_long)
		   begin
			me_cnt_clr = 1'b1;
			next_state = RESET;
		   end
		else
		if(!mode_hs && T1_gt_3_0_mS)			
		   begin
			idle_cnt_clr = 1'b1;
			suspend_set = 1'b1;
			next_state = SUSPEND;
		   end
		else
		if(mode_hs && T1_gt_3_0_mS)
		   begin			// Switch to FS mode, and decide
						// if it's a RESET or SUSPEND
			me_cnt_clr = 1'b1;
			xcv_set_fs = 1'b1;
			fs_term_on = 1'b1;
			next_state = RES_SUSP;
		   end
	     end

	   RES_SUSP:	// Decide if it's a Reset or Suspend Signaling
	     begin	// We are now in FS mode, wait 100uS first
		if(T2_gt_100_uS && se0_long)
		   begin
			me_cnt_clr = 1'b1;
			next_state = RESET;
		   end
		else
		if(T2_gt_100_uS && j_long)
		   begin
			idle_cnt_clr = 1'b1;
			suspend_set = 1'b1;
			next_state = SUSPEND;
		   end
	     end

	   SUSPEND:	// In Suspend
	     begin
		if(T1_gt_2_5_uS && se0_long)
		   begin
			suspend_clr = 1'b1;
			me_cnt_clr = 1'b1;
			next_state = RESET;
		   end
		else
		if(k_long)			// Start Resuming
			next_state = RESUME;
		else
		if(T1_gt_5_0_mS && resume_req_s)
			next_state = RESUME_REQUEST;
	     end

	   RESUME:
	     begin
		suspend_clr = 1'b1;
		if(ls_se0)
		   begin
			if(mode_hs)
			   begin	// Switch Back to HS mode
				xcv_set_hs = 1'b1;
				fs_term_off = 1'b1;
			   end
			bit_stuff_on  = 1'b1;	// Enable Bit Stuffing and NRZI encoding
			me_cnt_clr = 1'b1;
			next_state = RESUME_WAIT;
		   end
	     end

	   RESUME_WAIT:
	     begin
		if(T2_gt_100_uS)	next_state = NORMAL;
	     end

	   RESUME_REQUEST:	// Function Resume Request
	     begin
		suspend_clr = 1'b1;
		// Wait for internal wake up
		if(T2_wakeup)
		   begin
			fs_term_on = 1'b1;	// Switch Termination to Full Speed
			bit_stuff_off  = 1'b1;	// disable Bit Stuffing and NRZI encoding
			me_cnt_clr = 1'b1;
			next_state = RESUME_SIG;
		   end
	     end

	   RESUME_SIG:	// Signal resume
	     begin
		// Drive Resume ('K') for 1-15 mS
		drive_k_d = 1'b1;
		// Stop driving after 1.5 mS
		if(T2_gt_1_0_mS)		next_state = RESUME;
	     end

	   ATTACH:	// Attach To USB Detected
	     begin
		idle_cnt_clr = 1'b1;
		if(me_cnt_100_ms)
		//if(me_cnt_100_ms && j_long)
		   begin
			attached_set = 1'b1;
			next_state = NORMAL;
		   end
		/*
		if(me_cnt_100_ms && se0_long)
		   begin
			attached_set = 1'b1;
			me_cnt_clr = 1'b1;
			next_state = RESET;
		   end
		*/
	     end

	   RESET:	// In Reset
	     begin
		usb_reset_d = 1'b1;	// Assert Internal USB Reset
		xcv_set_hs = 1'b1;	// Switch xcvr to HS mode
		fs_term_on = 1'b1;	// Turn FS termination On
		mode_set_fs = 1'b1;	// Change mode to FS
		bit_stuff_off  = 1'b1;	// disable Bit Stuffing and NRZI encoding
		// Get out of reset after 1.5 mS
		if(T2_gt_1_0_mS)
		   begin
			me_cnt_clr = 1'b1;
			next_state = SPEED_NEG;
		   end
	     end

	   SPEED_NEG:	// Speed Negotiation
	     begin
		drive_k_d = 1'b1;
		chirp_cnt_clr = 1'b1;
		// Start looking for 'K' after 1.5 mS
		if(T2_gt_1_2_mS)	next_state = SPEED_NEG_K;
	     end

	   SPEED_NEG_K:
	     begin
		if(chirp_cnt_is_6)	next_state = SPEED_NEG_HS;
		else
		   begin
			if(k_long)
			   begin
				chirp_cnt_inc = 1'b1;
				next_state = SPEED_NEG_J;
			   end
			if(se0_long)
				next_state = SPEED_NEG_FS;
		   end
	     end

	   SPEED_NEG_J:
	     begin
		if(chirp_cnt_is_6)	next_state = SPEED_NEG_HS;
		else
		   begin
			if(j_long)
			   begin
				chirp_cnt_inc = 1'b1;
				next_state = SPEED_NEG_K;
			   end
			if(se0_long)
				next_state = SPEED_NEG_FS;
		   end
	     end

	   SPEED_NEG_HS:
	     begin
		bit_stuff_on  = 1'b1;	// Enable Bit Stuffing and NRZI encoding
		xcv_set_hs = 1'b1;	// Switch xcvr to HS mode
		fs_term_off = 1'b1;	// Turn FS termination Off
		mode_set_hs = 1'b1;	// Change mode to HS
		if(se0_long)		next_state = NORMAL;
	     end

	   SPEED_NEG_FS:
	     begin
		bit_stuff_on  = 1'b1;	// Enable Bit Stuffing and NRZI encoding
		xcv_set_fs = 1'b1;	// Switch xcvr to FS mode
		fs_term_on = 1'b1;	// Turn FS termination On
		mode_set_fs = 1'b1;	// Change mode to FS
		next_state = NORMAL;
	     end

	endcase
   end

endmodule