📄 dhcpd.h
字号:
/* vi: set sw=4 ts=4: *//* dhcpd.h */#ifndef _DHCPD_H#define _DHCPD_H/************************************//* Defaults _you_ may want to tweak *//************************************//* the period of time the client is allowed to use that address */#define LEASE_TIME (60*60*24*10) /* 10 days of seconds */#define LEASES_FILE "/var/lib/misc/udhcpd.leases"/* where to find the DHCP server configuration file */#define DHCPD_CONF_FILE "/etc/udhcpd.conf"/*****************************************************************//* Do not modify below here unless you know what you are doing!! *//*****************************************************************//* DHCP protocol -- see RFC 2131 */#define SERVER_PORT 67#define CLIENT_PORT 68#define DHCP_MAGIC 0x63825363/* DHCP option codes (partial list) */#define DHCP_PADDING 0x00#define DHCP_SUBNET 0x01#define DHCP_TIME_OFFSET 0x02#define DHCP_ROUTER 0x03#define DHCP_TIME_SERVER 0x04#define DHCP_NAME_SERVER 0x05#define DHCP_DNS_SERVER 0x06#define DHCP_LOG_SERVER 0x07#define DHCP_COOKIE_SERVER 0x08#define DHCP_LPR_SERVER 0x09#define DHCP_HOST_NAME 0x0c#define DHCP_BOOT_SIZE 0x0d#define DHCP_DOMAIN_NAME 0x0f#define DHCP_SWAP_SERVER 0x10#define DHCP_ROOT_PATH 0x11#define DHCP_IP_TTL 0x17#define DHCP_MTU 0x1a#define DHCP_BROADCAST 0x1c#define DHCP_NTP_SERVER 0x2a#define DHCP_WINS_SERVER 0x2c#define DHCP_REQUESTED_IP 0x32#define DHCP_LEASE_TIME 0x33#define DHCP_OPTION_OVER 0x34#define DHCP_MESSAGE_TYPE 0x35#define DHCP_SERVER_ID 0x36#define DHCP_PARAM_REQ 0x37#define DHCP_MESSAGE 0x38#define DHCP_MAX_SIZE 0x39#define DHCP_T1 0x3a#define DHCP_T2 0x3b#define DHCP_VENDOR 0x3c#define DHCP_CLIENT_ID 0x3d#define DHCP_FQDN 0x51#define DHCP_END 0xFF#define BOOTREQUEST 1#define BOOTREPLY 2#define ETH_10MB 1#define ETH_10MB_LEN 6#define DHCPDISCOVER 1#define DHCPOFFER 2#define DHCPREQUEST 3#define DHCPDECLINE 4#define DHCPACK 5#define DHCPNAK 6#define DHCPRELEASE 7#define DHCPINFORM 8#define BROADCAST_FLAG 0x8000#define OPTION_FIELD 0#define FILE_FIELD 1#define SNAME_FIELD 2/* miscellaneous defines */#define MAC_BCAST_ADDR (uint8_t *) "\xff\xff\xff\xff\xff\xff"#define OPT_CODE 0#define OPT_LEN 1#define OPT_DATA 2struct option_set { uint8_t *data; struct option_set *next;};struct static_lease { uint8_t *mac; uint32_t *ip; struct static_lease *next;};struct server_config_t { uint32_t server; /* Our IP, in network order */ uint32_t start; /* Start address of leases, network order */ uint32_t end; /* End of leases, network order */ struct option_set *options; /* List of DHCP options loaded from the config file */ char *interface; /* The name of the interface to use */ int ifindex; /* Index number of the interface to use */ uint8_t arp[6]; /* Our arp address */ unsigned long lease; /* lease time in seconds (host order) */ unsigned long max_leases; /* maximum number of leases (including reserved address) */ char remaining; /* should the lease file be interpreted as lease time remaining, or * as the time the lease expires */ unsigned long auto_time; /* how long should udhcpd wait before writing a config file. * if this is zero, it will only write one on SIGUSR1 */ unsigned long decline_time; /* how long an address is reserved if a client returns a * decline message */ unsigned long conflict_time; /* how long an arp conflict offender is leased for */ unsigned long offer_time; /* how long an offered address is reserved */ unsigned long min_lease; /* minimum lease a client can request*/ char *lease_file; char *pidfile; char *notify_file; /* What to run whenever leases are written */ uint32_t siaddr; /* next server bootp option */ char *sname; /* bootp server name */ char *boot_file; /* bootp boot file option */ struct static_lease *static_leases; /* List of ip/mac pairs to assign static leases */};extern struct server_config_t server_config;extern struct dhcpOfferedAddr *leases;/*** leases.h ***/struct dhcpOfferedAddr { uint8_t chaddr[16]; uint32_t yiaddr; /* network order */ uint32_t expires; /* host order */};extern uint8_t blank_chaddr[];void clear_lease(uint8_t *chaddr, uint32_t yiaddr);struct dhcpOfferedAddr *add_lease(uint8_t *chaddr, uint32_t yiaddr, unsigned long lease);int lease_expired(struct dhcpOfferedAddr *lease);struct dhcpOfferedAddr *oldest_expired_lease(void);struct dhcpOfferedAddr *find_lease_by_chaddr(uint8_t *chaddr);struct dhcpOfferedAddr *find_lease_by_yiaddr(uint32_t yiaddr);uint32_t find_address(int check_expired);/*** static_leases.h ***//* Config file will pass static lease info to this function which will add it * to a data structure that can be searched later */int addStaticLease(struct static_lease **lease_struct, uint8_t *mac, uint32_t *ip);/* Check to see if a mac has an associated static lease */uint32_t getIpByMac(struct static_lease *lease_struct, void *arg);/* Check to see if an ip is reserved as a static ip */uint32_t reservedIp(struct static_lease *lease_struct, uint32_t ip);/* Print out static leases just to check what's going on (debug code) */void printStaticLeases(struct static_lease **lease_struct);/*** serverpacket.h ***/int sendOffer(struct dhcpMessage *oldpacket);int sendNAK(struct dhcpMessage *oldpacket);int sendACK(struct dhcpMessage *oldpacket, uint32_t yiaddr);int send_inform(struct dhcpMessage *oldpacket);/*** files.h ***/struct config_keyword { const char *keyword; int (* const handler)(const char *line, void *var); void *var; const char *def;};int read_config(const char *file);void write_leases(void);void read_leases(const char *file);struct option_set *find_option(struct option_set *opt_list, char code);#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -