cmd-change-brd-width.ulp

老外的PCB设计软件,是免费的.可以上网更新.

#usage "<qt>This ULP changes the wire width of certain signals and do have "
       "a wire width in between the minimum (minwidth) and maximum (maxwidth) values.<p>"
       "NameOff = 1 switches off the checking of net names.<p>"

string hilfe =
       "Dieses ULP 鋘dert die Leiterbahnbreite abhaengig vom Signalnamen und "
       "der vorgegebenen min. max. Breite.<p>" +
       "! Mit NameOff kann die Netz-Namen-Ueberpruefung abgeschaltet werden.<p>";

//     "THIS PROGRAM IS PROVIDED AS IS AND WITHOUT WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED.</qt>"

// *  02.03.2005 [e-mail]

string help = usage;
if (language() == "de") help = hilfe;


int Gridval = 1;              // 1=mm 2=mil 3=inch    ***
                              // choose the value for the units you're working with
string grid_unit;

real changewidth =  0.3;     // gewuenschte Breite in ***
                             // enter desired width here

real minwidth    =  0.0;     // Auswahl-Min-Breite in ***
                             // minimum width and
real maxwidth    = 13.1;     // Auswahl-Max-Breite in ***
                             // maximum width of tracks that will be taken into consideration.

int NameOff = 0;       // 0 = Breite abhaengig vom Netznamen aendern
                       // 0 = change width by name
                       // 1 = Breite unabhaengig vom Netznamen aendern
                       // 1 = change width without name

string signals[]   = { "" };
string chsignals[] = { "" };
int    chngsig     = 0;
int    lastSigCh   = 0;
int decs;

string list;

string grid[]         = { "MIC",  "MM", "MIL", "INCH" };
real   maxwidthUnit[] = { 13100.0, 13.1, 516.0, 0.516 };

string Version = " Version 1.5";

int index[];
int x1[], y1[], x2[], y2[], layer[];
int usedlayer[];
int n = 1;


int found(string fnam) {
  int fnd = 0;
  do {
    if (chsignals[fnd] == fnam) {
      return 1;
      break;
    }
    ++fnd;
  } while (chsignals[fnd]);
  return 0;
}


real fwidth(real ww) {
  if (ww <= maxwidth && ww >= minwidth) return 1;
  return 0;
}


void disp(int l) {
  printf("DISPLAY NONE %d ;\n", l);
  return;
}

void clearlay() {
  for (int ly = 0; ly <= 255; ly++) usedlayer[ly] = 0;
  return;
}


void clearsig (int selct) {
  for (int r = selct; r < lastSigCh; r++) {
    chsignals[r] = chsignals[r + 1];
  }
  chsignals[r + 1] = "";
  if (lastSigCh) lastSigCh--;
  return;
}


void  AddList (string SigName) {
  int found = 0;
  for (int r = 0; r < lastSigCh; r++) {
    if (chsignals[r] == SigName) {
      found = 1;
      break;
    }
  }
  if (!found) {
    chsignals[r] = SigName;
    lastSigCh++;
  }
  return;
}


void menue() {
  int cs;
  int l;
  int Result = dlgDialog("Change wire with") {
    string slist[];
    dlgLabel(help);
    dlgSpacing(40);
    dlgGridLayout {
      dlgCell (0, 1) dlgSpacing(200);
      dlgCell (0, 5) dlgSpacing(200);
      dlgCell (1, 1) dlgLabel("&Signal list");
      dlgCell (2, 1) dlgComboBox(signals, chngsig);
      dlgCell (2, 3) dlgPushButton("&Add -->>") {
                       AddList(signals[chngsig]);
                     }
      dlgCell (1, 5) dlgLabel("Signals &to change");
      dlgCell (2, 5) dlgComboBox(chsignals, decs);
      dlgCell (2, 6) dlgPushButton("&Delete") {
                       clearsig(decs);
                     }
    }

    dlgStretch(1);
    dlgCheckBox("&Change without Signal name", NameOff);

    dlgHBoxLayout {
      dlgGroup("between wire width : " + grid_unit) {
        dlgHBoxLayout {
          dlgLabel("Mi&n. "); dlgRealEdit(minwidth, 0.0, maxwidthUnit[Gridval]);
          dlgLabel(" Ma&x. "); dlgRealEdit(maxwidth, minwidth, maxwidthUnit[Gridval]);
        }
      }
      dlgLabel(" new wire &width ");
      dlgRealEdit(changewidth);
      dlgStretch(1);
    }

    dlgHBoxLayout {
      dlgStretch(0);
      dlgPushButton("&OK") dlgAccept();
      dlgStretch(1);
      dlgPushButton("-Cancel") dlgReject();
      dlgStretch(0);
    }
    dlgStretch(0);
  };
  if (Result == 0) exit (0);
  return;
}


if (board) board(B) {
  int s = 0;
  B.signals(S) {
    signals[s] = S.name;
    s++;
  }
  Gridval = B.grid.unit;
  grid_unit = "Unit " + grid[Gridval];
  maxwidth = maxwidthUnit[Gridval];
  menue();

  clearlay();
  string file = filesetext(B.name, "chnwidth.scr");
  output (file, "wtD") {
    printf("# %s\n", Version);
    printf("# %s\n\n", EAGLE_SIGNATURE);
    printf("# exported from %s\n# at %s\n\n", B.name, t2string(time()) );
    printf("# This Script changed Wire Width between %.3f %s and %.3f %s to %.3f %s\n",
                   minwidth, grid[Gridval], maxwidth, grid[Gridval], changewidth, grid[Gridval]);

    printf("GRID %s FINEST;\n", grid[Gridval]);

    B.signals(S) {
      if (found(S.name) || NameOff) {
        real Wwidth;

        S.wires(W) {
          switch (Gridval) {
            case 0: Wwidth = u2mic(W.width);
                    break;

            case 1: Wwidth = u2mm(W.width);
                    break;

            case 2: Wwidth = u2mil(W.width);
                    break;

            case 3: Wwidth = u2inch(W.width);
                    break;
          }

          if(fwidth(Wwidth)) {
            x1[n] = W.x1;
            y1[n] = W.y1;
            x2[n] = W.x2;
            y2[n] = W.y2;
            layer[n] = W.layer;
            ++n;
          }
        }
      }
    }

    sort(n, index, layer);
    int dl = 0;
    for (int i = 1; i < n; ++i) {
      if(dl != layer[index[i]]) {
        dl = layer[index[i]];
        disp(dl);
        usedlayer[dl] = 1;
      }
      switch (Gridval) {
        case 0: printf("CHANGE WIDTH %.3f (%.3f %.3f);\n",
                changewidth, (u2mic(x1[index[i]]) + u2mic(x2[index[i]])) / 2,
                             (u2mic(y1[index[i]]) + u2mic(y2[index[i]])) / 2 );
                break;

        case 1: printf("CHANGE WIDTH %.3f (%.3f %.3f);\n",
                changewidth, (u2mm(x1[index[i]]) + u2mm(x2[index[i]])) / 2,
                             (u2mm(y1[index[i]]) + u2mm(y2[index[i]])) / 2 );
                break;

        case 2: printf("CHANGE WIDTH %.3f (%.3f %.3f);\n",
                changewidth, (u2mil(x1[index[i]]) + u2mil(x2[index[i]])) / 2,
                             (u2mil(y1[index[i]]) + u2mil(y2[index[i]])) / 2 );
                break;

        case 3: printf("CHANGE WIDTH %.3f (%.3f %.3f);\n",
                changewidth, (u2inch(x1[index[i]]) + u2inch(x2[index[i]])) / 2,
                             (u2inch(y1[index[i]]) + u2inch(y2[index[i]])) / 2 );
                break;
      }
    }
    printf("DISPLAY  ");
    for (int ly = 0; ly <= 255; ly++) {
      if( usedlayer[ly]) printf("%d ",ly);
    }
    printf(";\n");
  }
  exit ("SCRIPT '" + file + "';");
}
else dlgMessageBox("start this ULP in Board", "OK");