mycontrolbar.cpp

一个用于无刷直流电动机的驱动与控制程序.里面所用的采集卡的型号为MC08.

// MycontrolBar.cpp : implementation file
//

#include "stdafx.h"
#include "TestForm.h"
#include "MycontrolBar.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

/////////////////////////////////////////////////////////////////////////////
// MycontrolBar

MycontrolBar::MycontrolBar()
{
}

MycontrolBar::~MycontrolBar()
{
}


BEGIN_MESSAGE_MAP(MycontrolBar, CSizingControlBar)
	//{{AFX_MSG_MAP(MycontrolBar)
	ON_WM_CREATE()
	ON_WM_SIZE()
	//}}AFX_MSG_MAP
END_MESSAGE_MAP()

/////////////////////////////////////////////////////////////////////////////
// mybar message handlers

void MycontrolBar::OnUpdateCmdUI(CFrameWnd *pTarget, BOOL bDisableIfNoHndler)
{
	UpdateDialogControls(pTarget, bDisableIfNoHndler);
}

int MycontrolBar::OnCreate(LPCREATESTRUCT lpCreateStruct) 
{
	if (CSizingControlBar::OnCreate(lpCreateStruct) == -1)
		return -1;
	
	// TODO: Add your specialized creation code here
	m_TreeCtrl.Create(WS_VISIBLE | WS_TABSTOP | WS_CHILD | WS_BORDER
		| TVS_HASBUTTONS | TVS_LINESATROOT | TVS_HASLINES
		| TVS_DISABLEDRAGDROP|TVS_TRACKSELECT | TVS_NOTOOLTIPS,
		CRect(10, 10, 300, 100), this, ID_TREECTRL);
	
	
	//	m_TreeCtrl.SetImageList(&m_images,TVSIL_NORMAL);
	// set "normal" GUI-font
	CFont *font = CFont::FromHandle((HFONT)::GetStockObject(DEFAULT_GUI_FONT));
	m_TreeCtrl.SetFont(font);
	
	HTREEITEM root = m_TreeCtrl.InsertItem("机械传动试验平台",0,0);
	HTREEITEM subroot1 = m_TreeCtrl.InsertItem("试验项目",1,1,root);
	HTREEITEM subroot2 = m_TreeCtrl.InsertItem("试验帮助系统",1,1,root);
	HTREEITEM subroot3 = m_TreeCtrl.InsertItem("设备调试",1,1,root);
	HTREEITEM subroot4 = m_TreeCtrl.InsertItem("系统设置",1,1,root);
// 	HTREEITEM subroot3 = m_TreeCtrl.InsertItem("区文件",1,1,root);

/*	
	m_TreeCtrl.SetItemImage(subroot1,1,0);
	m_TreeCtrl.SetItemImage(subroot2,1,0);	
	m_TreeCtrl.SetItemImage(subroot3,1,0);
*/	
	m_TreeCtrl.InsertItem("效率试验",1,1,subroot1);
	m_TreeCtrl.InsertItem("超载试验",1,1,subroot1);
	m_TreeCtrl.InsertItem("传动精度试验",1,1,subroot1);
	m_TreeCtrl.InsertItem("过度过程试验",1,1,subroot1);
	m_TreeCtrl.InsertItem("启动力矩试验",1,1,subroot1);
	m_TreeCtrl.InsertItem("空程回差试验",1,1,subroot1);
	m_TreeCtrl.InsertItem("刚度及回差试验",1,1,subroot1);	
	
	m_TreeCtrl.InsertItem("效率试验帮助",1,1,subroot2);
	m_TreeCtrl.InsertItem("超载试验帮助",1,1,subroot2);
	m_TreeCtrl.InsertItem("传动精度试验帮助",1,1,subroot2);
	m_TreeCtrl.InsertItem("过度过程试验帮助",1,1,subroot2);
	m_TreeCtrl.InsertItem("启动力矩试验帮助",1,1,subroot2);
	m_TreeCtrl.InsertItem("空程回差试验帮助",1,1,subroot2);
	m_TreeCtrl.InsertItem("刚度及回差试验帮助",1,1,subroot2);

	m_TreeCtrl.InsertItem("伺服电机调试",1,1,subroot3);
	m_TreeCtrl.InsertItem("效率仪调试",1,1,subroot3);
	m_TreeCtrl.InsertItem("编码器调试",1,1,subroot3);

	m_TreeCtrl.InsertItem("试验设置",1,1,subroot4);
//	m_TreeCtrl.InsertItem("属性结构浏览",1,1,subroot3);
//	m_TreeCtrl.InsertItem("文件更新",1,1,subroot3);

	
	m_TreeCtrl.SelectItem(root);
	m_TreeCtrl.Expand(root, TVE_EXPAND);
	m_TreeCtrl.Expand(subroot1, TVE_EXPAND);
	m_TreeCtrl.Expand(subroot2, TVE_EXPAND);
 	m_TreeCtrl.Expand(subroot3, TVE_EXPAND);
	m_TreeCtrl.Expand(subroot4, TVE_EXPAND);	

	return 0; 

}

void MycontrolBar::OnSize(UINT nType, int cx, int cy) 
{
	CSizingControlBar::OnSize(nType, cx, cy);
	
	// TODO: Add your message handler code here
	
	CRect rc;
	GetClientRect(&rc);
	m_TreeCtrl.MoveWindow(&rc);
}