spdf54126init.c

来自「TFT液晶驱动IC程序。IC经旭耀的SPDF54126初始化程序。」· C语言 代码 · 共 83 行

//DRIVER IC :SPFD54126B
//initail code
WriteDirect(CMD_MODE,0x11) ;          //sleep out 
WriteDirect(CMD_MODE,0x20) ;          //display inversion off  
WriteDirect(CMD_MODE,0x38) ;         //idle mode off  
WriteDirect(CMD_MODE,0x13) ;         //partial off  
WriteDirect(CMD_MODE,0x36);       //set SMX SMY SRGB  
WriteDirect(DATA_MODE,0x18);   
WriteDirect(CMD_MODE,0xC0);          //Set the GVDD and VCI1 voltage 
WriteDirect(DATA_MODE,0x06);    //01** GVDD =4.75
WriteDirect(DATA_MODE,0x05);    // VCI1=2.5 
WriteDirect(CMD_MODE,0xc5);      //Set VCOMH Voltage
WriteDirect(DATA_MODE,0xA3);   //  a6*** 0011010 26 VGH=3.150 
WriteDirect(CMD_MODE,0xc6);      //-***c6Set VCOMAC Voltage 
WriteDirect(DATA_MODE,0x04);   //000110 6 4.300
WriteDirect(CMD_MODE,0x3a); 
WriteDirect(DATA_MODE,0x65); 
WriteDirect(CMD_MODE,0xf0) ;  
WriteDirect(DATA_MODE,0x5a);   
WriteDirect(CMD_MODE,0xf2) ;  
WriteDirect(DATA_MODE,0x01);  
//-----------gamma--------------//  
WriteDirect(CMD_MODE,0xe0);   
WriteDirect(DATA_MODE,0x00);   
WriteDirect(DATA_MODE,0x01);   
WriteDirect(DATA_MODE,0x06);   
WriteDirect(DATA_MODE,0x2A);  
WriteDirect(DATA_MODE,0x25);  
WriteDirect(DATA_MODE,0x0b);   
WriteDirect(DATA_MODE,0x18);   
WriteDirect(DATA_MODE,0x05);  
WriteDirect(DATA_MODE,0x06);  
WriteDirect(DATA_MODE,0x05);  
WriteDirect(DATA_MODE,0x0B); 
  
WriteDirect(DATA_MODE,0x0C); 
  
WriteDirect(DATA_MODE,0x01); 
  
WriteDirect(DATA_MODE,0x04); 
  
WriteDirect(DATA_MODE,0x03);
  
WriteDirect(DATA_MODE,0x06);
 
  
WriteDirect(CMD_MODE,0xe1); 
  
WriteDirect(DATA_MODE,0x06); 
  
WriteDirect(DATA_MODE,0x1D); 
  
WriteDirect(DATA_MODE,0x21); 
  
WriteDirect(DATA_MODE,0x0f); 
  
WriteDirect(DATA_MODE,0x0a);
  
WriteDirect(DATA_MODE,0x04); 
  
WriteDirect(DATA_MODE,0x05); 
  
WriteDirect(DATA_MODE,0x18); 
  
WriteDirect(DATA_MODE,0x06); 
  
WriteDirect(DATA_MODE,0x04);
  
WriteDirect(DATA_MODE,0x05); 
  
WriteDirect(DATA_MODE,0x02); 
  
WriteDirect(DATA_MODE,0x0B); 
  
WriteDirect(DATA_MODE,0x0A); 
  
WriteDirect(DATA_MODE,0x05);
  
WriteDirect(DATA_MODE,0x05);
  
WriteDirect(CMD_MODE,0x29);  

//initial end