types.h

dvr

/*
********************************************************************************
*
* (c) Copyright 2002, Vineyard Technologies, Inc.
*
* Filename : types.h
* Programmer(s): Steve KyeongHyeon Lee
* Created : 2003/05/07
* Modified :  
* Last Modified:  Al 07/14/2005
* Version : 20.17.A
*
* Description :
********************************************************************************
*/

#ifndef __TYPES_H__
#define __TYPES_H__

#define LANIF 
#define PWRCV2 
//#define TW2804
#define VY_MD //changed 02/24 by Al
#define G1PMD //Added 02/24 by Al
#define G1P_PAL_MODIFY  //removed 02/24 by Al
//#define REMOVE_CENTER
#define USE_4954
//#define USE_4954_GP
//#define USE_BIT1201
//#define CHECK_VIDEO_SYNC_LOCK

//#define DISPLAY_IP_ADDRESS
//#define BAUDRATE              1152
//#define RS232_TO_PC_TRANSFER
//#define RECORD_STOP_PASSWORD   //when stop recoed,need input password confirm
//#define POWER_ON_RECORD


/***************************************************
USE_ADJ 0 == Disable on screen Brightness, Contrast, Satuation adjustment
USE_ADJ 1 == Enable on screen adjustment, change into Channel Full Screen,
			 Press PAUSE to set to default, Press MENU to popup adjustment option.
****************************************************/
#define USE_ADJ 1
/***************************************************
FONT_SC for Simplified Chinese OSD display
Remove FONT definitin for default English OSD display
****************************************************/
#define FONT_SC
//#define FONT_TC

//#define MORE_EVENT
#define RE_CON
//#define RE_CON_TX

/*****************************************************
Added single channel firmware support    07/14/05

1.  Remove first 3 lines of MAIN MENU -- Activate only Channel 1, EACH mode only
2.  Adjust the starting cursor position in MAIN MENU
3.  Remove motion detection for other 3 channels.
4.  Change the Decoder register programming process.

******************************************************/
//#define SINGLE_CHANNEL
//#define DRAW_CROSS

//for Debug
//#define DEBUG_DETECT_LOCK
//#define DEBUG_KEY_MAP_DISPLAY
//#define TEST_AV_OUT_ONOFF//