config.in

嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使

#
# File system configuration
#
mainmenu_option next_comment
comment 'File systems'

bool 'Quota support' CONFIG_QUOTA
tristate 'Kernel automounter support' CONFIG_AUTOFS_FS
tristate 'Kernel automounter version 4 support (also supports v3)' CONFIG_AUTOFS4_FS

tristate 'Reiserfs support' CONFIG_REISERFS_FS
dep_mbool '  Have reiserfs do extra internal checking' CONFIG_REISERFS_CHECK $CONFIG_REISERFS_FS
dep_mbool '  Stats in /proc/fs/reiserfs' CONFIG_REISERFS_PROC_INFO $CONFIG_REISERFS_FS

dep_tristate 'ADFS file system support' CONFIG_ADFS_FS $CONFIG_EXPERIMENTAL
dep_mbool '  ADFS write support (DANGEROUS)' CONFIG_ADFS_FS_RW $CONFIG_ADFS_FS $CONFIG_EXPERIMENTAL

dep_tristate 'Amiga FFS file system support (EXPERIMENTAL)' CONFIG_AFFS_FS $CONFIG_EXPERIMENTAL

dep_tristate 'Apple Macintosh file system support (EXPERIMENTAL)' CONFIG_HFS_FS $CONFIG_EXPERIMENTAL

dep_tristate 'BFS file system support (EXPERIMENTAL)' CONFIG_BFS_FS $CONFIG_EXPERIMENTAL

tristate 'Ext3 journalling file system support (EXPERIMENTAL)' CONFIG_EXT3_FS
# CONFIG_JBD could be its own option (even modular), but until there are
# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS
# dep_tristate '  Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS
define_bool CONFIG_JBD $CONFIG_EXT3_FS
dep_mbool '  JBD (ext3) debugging support' CONFIG_JBD_DEBUG $CONFIG_JBD

# msdos file systems
tristate 'DOS FAT fs support' CONFIG_FAT_FS
dep_tristate '  MSDOS fs support' CONFIG_MSDOS_FS $CONFIG_FAT_FS
dep_tristate '    UMSDOS: Unix-like file system on top of standard MSDOS fs' CONFIG_UMSDOS_FS $CONFIG_MSDOS_FS
dep_tristate '  VFAT (Windows-95) fs support' CONFIG_VFAT_FS $CONFIG_FAT_FS
dep_tristate 'EFS file system support (read only) (EXPERIMENTAL)' CONFIG_EFS_FS $CONFIG_EXPERIMENTAL
dep_tristate 'Journalling Flash File System (JFFS) support' CONFIG_JFFS_FS $CONFIG_MTD
if [ "$CONFIG_JFFS_FS" = "y" -o "$CONFIG_JFFS_FS" = "m" ] ; then
   int 'JFFS debugging verbosity (0 = quiet, 3 = noisy)' CONFIG_JFFS_FS_VERBOSE 0
   bool 'JFFS stats available in /proc filesystem' CONFIG_JFFS_PROC_FS
fi
dep_tristate 'Journalling Flash File System v2 (JFFS2) support' CONFIG_JFFS2_FS $CONFIG_MTD
if [ "$CONFIG_JFFS2_FS" = "y" -o "$CONFIG_JFFS2_FS" = "m" ] ; then
   int 'JFFS2 debugging verbosity (0 = quiet, 2 = noisy)' CONFIG_JFFS2_FS_DEBUG 0
fi
if [ "$CONFIG_MTD_NAND" = "y" -o "$CONFIG_MTD_SMC" = "y" ] ; then
   tristate "Yaffs filesystem on NAND" CONFIG_YAFFS_FS
fi

tristate 'Compressed ROM file system support' CONFIG_CRAMFS
bool 'Virtual memory file system support (former shm fs)' CONFIG_TMPFS
tristate 'Simple RAM-based file system support' CONFIG_RAMFS

tristate 'ISO 9660 CDROM file system support' CONFIG_ISO9660_FS
dep_mbool '  Microsoft Joliet CDROM extensions' CONFIG_JOLIET $CONFIG_ISO9660_FS
dep_mbool '  Transparent decompression extension' CONFIG_ZISOFS $CONFIG_ISO9660_FS

tristate 'Minix fs support' CONFIG_MINIX_FS

tristate 'FreeVxFS file system support (VERITAS VxFS(TM) compatible)' CONFIG_VXFS_FS
tristate 'NTFS file system support (read only)' CONFIG_NTFS_FS
dep_mbool '  NTFS write support (DANGEROUS)' CONFIG_NTFS_RW $CONFIG_NTFS_FS $CONFIG_EXPERIMENTAL

tristate 'OS/2 HPFS file system support' CONFIG_HPFS_FS

bool '/proc file system support' CONFIG_PROC_FS

dep_bool '/dev file system support (EXPERIMENTAL)' CONFIG_DEVFS_FS $CONFIG_EXPERIMENTAL
dep_bool '  Automatically mount at boot' CONFIG_DEVFS_MOUNT $CONFIG_DEVFS_FS
dep_bool '  Debug devfs' CONFIG_DEVFS_DEBUG $CONFIG_DEVFS_FS

# It compiles as a module for testing only.  It should not be used
# as a module in general.  If we make this "tristate", a bunch of people
# who don't know what they are doing turn it on and complain when it
# breaks.
dep_bool '/dev/pts file system for Unix98 PTYs' CONFIG_DEVPTS_FS $CONFIG_UNIX98_PTYS

dep_tristate 'QNX4 file system support (read only) (EXPERIMENTAL)' CONFIG_QNX4FS_FS $CONFIG_EXPERIMENTAL
dep_mbool '  QNX4FS write support (DANGEROUS)' CONFIG_QNX4FS_RW $CONFIG_QNX4FS_FS $CONFIG_EXPERIMENTAL

tristate 'ROM file system support' CONFIG_ROMFS_FS

tristate 'Second extended fs support' CONFIG_EXT2_FS

tristate 'System V/Xenix/V7/Coherent file system support' CONFIG_SYSV_FS

tristate 'UDF file system support (read only)' CONFIG_UDF_FS
dep_mbool '  UDF write support (DANGEROUS)' CONFIG_UDF_RW $CONFIG_UDF_FS $CONFIG_EXPERIMENTAL

tristate 'UFS file system support (read only)' CONFIG_UFS_FS
dep_mbool '  UFS file system write support (DANGEROUS)' CONFIG_UFS_FS_WRITE $CONFIG_UFS_FS $CONFIG_EXPERIMENTAL

if [ "$CONFIG_NET" = "y" ]; then

   mainmenu_option next_comment
   comment 'Network File Systems'

   dep_tristate 'Coda file system support (advanced network fs)' CONFIG_CODA_FS $CONFIG_INET
   dep_tristate 'InterMezzo file system support (experimental, replicating fs)' CONFIG_INTERMEZZO_FS $CONFIG_INET $CONFIG_EXPERIMENTAL
   dep_tristate 'NFS file system support' CONFIG_NFS_FS $CONFIG_INET
   dep_mbool '  Provide NFSv3 client support' CONFIG_NFS_V3 $CONFIG_NFS_FS
   dep_bool '  Root file system on NFS' CONFIG_ROOT_NFS $CONFIG_NFS_FS $CONFIG_IP_PNP

   dep_tristate 'NFS server support' CONFIG_NFSD $CONFIG_INET
   dep_mbool '  Provide NFSv3 server support' CONFIG_NFSD_V3 $CONFIG_NFSD

   if [ "$CONFIG_NFS_FS" = "y" -o "$CONFIG_NFSD" = "y" ]; then
      define_tristate CONFIG_SUNRPC y
      define_tristate CONFIG_LOCKD y
   else
      if [ "$CONFIG_NFS_FS" = "m" -o "$CONFIG_NFSD" = "m" ]; then
	 define_tristate CONFIG_SUNRPC m
	 define_tristate CONFIG_LOCKD m
   else
	 define_tristate CONFIG_SUNRPC n
	 define_tristate CONFIG_LOCKD n
      fi
   fi
   if [ "$CONFIG_NFSD_V3" = "y" -o "$CONFIG_NFS_V3" = "y" ]; then
     define_bool CONFIG_LOCKD_V4 y
   fi

   dep_tristate 'SMB file system support (to mount Windows shares etc.)' CONFIG_SMB_FS $CONFIG_INET
   if [ "$CONFIG_SMB_FS" != "n" ]; then
      bool '  Use a default NLS' CONFIG_SMB_NLS_DEFAULT
      if [ "$CONFIG_SMB_NLS_DEFAULT" = "y" ]; then
         string '    Default Remote NLS Option' CONFIG_SMB_NLS_REMOTE "cp437"
      fi
   fi
   if [ "$CONFIG_IPX" != "n" -o "$CONFIG_INET" != "n" ]; then
      tristate 'NCP file system support (to mount NetWare volumes)' CONFIG_NCP_FS
      source fs/ncpfs/Config.in
   else
      # for fs/nls/Config.in
      define_bool CONFIG_NCPFS_NLS n
   fi
   endmenu

else
   # for fs/nls/Config.in
   define_bool CONFIG_NCPFS_NLS n
   define_bool CONFIG_SMB_FS n
fi

#
# Do we need the compression support?
#
if [ "$CONFIG_ZISOFS" = "y" ]; then
   define_tristate CONFIG_ZISOFS_FS $CONFIG_ISO9660_FS
else
   define_tristate CONFIG_ZISOFS_FS n
fi
if [ "$CONFIG_CRAMFS" = "y" -o "$CONFIG_ZISOFS_FS" = "y" ]; then
   define_tristate CONFIG_ZLIB_FS_INFLATE y
else
  if [ "$CONFIG_CRAMFS" = "m" -o "$CONFIG_ZISOFS_FS" = "m" ]; then
     define_tristate CONFIG_ZLIB_FS_INFLATE m
  else
     define_tristate CONFIG_ZLIB_FS_INFLATE n
  fi
fi

mainmenu_option next_comment
comment 'Partition Types'
source fs/partitions/Config.in
endmenu
source fs/nls/Config.in
endmenu