⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 dir.c

📁 嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使
💻 C
字号:
/* *  linux/fs/hpfs/dir.c * *  Mikulas Patocka (mikulas@artax.karlin.mff.cuni.cz), 1998-1999 * *  directory VFS functions */#include "hpfs_fn.h"#include <linux/sched.h>#include <linux/smp_lock.h>int hpfs_dir_release(struct inode *inode, struct file *filp){	lock_kernel();	hpfs_del_pos(inode, &filp->f_pos);	/*hpfs_write_if_changed(inode);*/	unlock_kernel();	return 0;}/* This is slow, but it's not used often */loff_t hpfs_dir_lseek(struct file *filp, loff_t off, int whence){	loff_t new_off = off + (whence == 1 ? filp->f_pos : 0);	loff_t pos;	struct quad_buffer_head qbh;	struct inode *i = filp->f_dentry->d_inode;	struct super_block *s = i->i_sb;	/*printk("dir lseek\n");*/	if (new_off == 0 || new_off == 1 || new_off == 11 || new_off == 12 || new_off == 13) goto ok;	hpfs_lock_inode(i);	pos = ((loff_t) hpfs_de_as_down_as_possible(s, i->i_hpfs_dno) << 4) + 1;	while (pos != new_off) {		if (map_pos_dirent(i, &pos, &qbh)) hpfs_brelse4(&qbh);		else goto fail;		if (pos == 12) goto fail;	}	hpfs_unlock_inode(i);	ok:	return filp->f_pos = new_off;	fail:	hpfs_unlock_inode(i);	/*printk("illegal lseek: %016llx\n", new_off);*/	return -ESPIPE;}int hpfs_readdir(struct file *filp, void *dirent, filldir_t filldir){	struct inode *inode = filp->f_dentry->d_inode;	struct quad_buffer_head qbh;	struct hpfs_dirent *de;	int lc;	long old_pos;	char *tempname;	int c1, c2 = 0;	if (inode->i_sb->s_hpfs_chk) {		if (hpfs_chk_sectors(inode->i_sb, inode->i_ino, 1, "dir_fnode"))			return -EFSERROR;		if (hpfs_chk_sectors(inode->i_sb, inode->i_hpfs_dno, 4, "dir_dnode"))			return -EFSERROR;	}	if (inode->i_sb->s_hpfs_chk >= 2) {		struct buffer_head *bh;		struct fnode *fno;		int e = 0;		if (!(fno = hpfs_map_fnode(inode->i_sb, inode->i_ino, &bh)))			return -EIOERROR;		if (!fno->dirflag) {			e = 1;			hpfs_error(inode->i_sb, "not a directory, fnode %08x",inode->i_ino);		}		if (inode->i_hpfs_dno != fno->u.external[0].disk_secno) {			e = 1;			hpfs_error(inode->i_sb, "corrupted inode: i_hpfs_dno == %08x, fnode -> dnode == %08x", inode->i_hpfs_dno, fno->u.external[0].disk_secno);		}		brelse(bh);		if (e) return -EFSERROR;	}	lc = inode->i_sb->s_hpfs_lowercase;	if (filp->f_pos == 12) { /* diff -r requires this (note, that diff -r */		filp->f_pos = 13; /* also fails on msdos filesystem in 2.0) */		return 0;	}	if (filp->f_pos == 13) return -ENOENT;		hpfs_lock_inode(inode);		while (1) {		again:		/* This won't work when cycle is longer than number of dirents		   accepted by filldir, but what can I do?		   maybe killall -9 ls helps */		if (inode->i_sb->s_hpfs_chk)			if (hpfs_stop_cycles(inode->i_sb, filp->f_pos, &c1, &c2, "hpfs_readdir")) {				hpfs_unlock_inode(inode);				return -EFSERROR;			}		if (filp->f_pos == 12) {			hpfs_unlock_inode(inode);			return 0;		}		if (filp->f_pos == 3 || filp->f_pos == 4 || filp->f_pos == 5) {			printk("HPFS: warning: pos==%d\n",(int)filp->f_pos);			hpfs_unlock_inode(inode);			return 0;		}		if (filp->f_pos == 0) {			if (filldir(dirent, ".", 1, filp->f_pos, inode->i_ino, DT_DIR) < 0) {				hpfs_unlock_inode(inode);				return 0;			}			filp->f_pos = 11;		}		if (filp->f_pos == 11) {			if (filldir(dirent, "..", 2, filp->f_pos, inode->i_hpfs_parent_dir, DT_DIR) < 0) {				hpfs_unlock_inode(inode);				return 0;			}			filp->f_pos = 1;		}		if (filp->f_pos == 1) {			filp->f_pos = ((loff_t) hpfs_de_as_down_as_possible(inode->i_sb, inode->i_hpfs_dno) << 4) + 1;			hpfs_add_pos(inode, &filp->f_pos);			filp->f_version = inode->i_version;		}			/*if (filp->f_version != inode->i_version) {				hpfs_unlock_inode(inode);				return -ENOENT;			}*/				old_pos = filp->f_pos;			if (!(de = map_pos_dirent(inode, &filp->f_pos, &qbh))) {				hpfs_unlock_inode(inode);				return -EIOERROR;			}			if (de->first || de->last) {				if (inode->i_sb->s_hpfs_chk) {					if (de->first && !de->last && (de->namelen != 2 || de ->name[0] != 1 || de->name[1] != 1)) hpfs_error(inode->i_sb, "hpfs_readdir: bad ^A^A entry; pos = %08x", old_pos);					if (de->last && (de->namelen != 1 || de ->name[0] != 255)) hpfs_error(inode->i_sb, "hpfs_readdir: bad \\377 entry; pos = %08x", old_pos);				}				hpfs_brelse4(&qbh);				goto again;			}			tempname = hpfs_translate_name(inode->i_sb, de->name, de->namelen, lc, de->not_8x3);			if (filldir(dirent, tempname, de->namelen, old_pos, de->fnode, DT_UNKNOWN) < 0) {				filp->f_pos = old_pos;				if (tempname != (char *)de->name) kfree(tempname);				hpfs_brelse4(&qbh);				hpfs_unlock_inode(inode);				return 0;			}			if (tempname != (char *)de->name) kfree(tempname);			hpfs_brelse4(&qbh);	}}/* * lookup.  Search the specified directory for the specified name, set * *result to the corresponding inode. * * lookup uses the inode number to tell read_inode whether it is reading * the inode of a directory or a file -- file ino's are odd, directory * ino's are even.  read_inode avoids i/o for file inodes; everything * needed is up here in the directory.  (And file fnodes are out in * the boondocks.) * *    - M.P.: this is over, sometimes we've got to read file's fnode for eas *	      inode numbers are just fnode sector numbers; iget lock is used *	      to tell read_inode to read fnode or not. */struct dentry *hpfs_lookup(struct inode *dir, struct dentry *dentry){	const char *name = dentry->d_name.name;	unsigned len = dentry->d_name.len;	struct quad_buffer_head qbh;	struct hpfs_dirent *de;	ino_t ino;	int err;	struct inode *result = NULL;	if ((err = hpfs_chk_name((char *)name, &len))) {		if (err == -ENAMETOOLONG) return ERR_PTR(-ENAMETOOLONG);		goto end_add;	}	hpfs_lock_inode(dir);	/*	 * '.' and '..' will never be passed here.	 */	de = map_dirent(dir, dir->i_hpfs_dno, (char *) name, len, NULL, &qbh);	/*	 * This is not really a bailout, just means file not found.	 */	if (!de) goto end;	/*	 * Get inode number, what we're after.	 */	ino = de->fnode;	/*	 * Go find or make an inode.	 */	hpfs_lock_iget(dir->i_sb, de->directory || (de->ea_size && dir->i_sb->s_hpfs_eas) ? 1 : 2);	if (!(result = iget(dir->i_sb, ino))) {		hpfs_unlock_iget(dir->i_sb);		hpfs_error(dir->i_sb, "hpfs_lookup: can't get inode");		goto bail1;	}	if (!de->directory) result->i_hpfs_parent_dir = dir->i_ino;	hpfs_unlock_iget(dir->i_sb);	hpfs_decide_conv(result, (char *)name, len);	if (de->has_acl || de->has_xtd_perm) if (!(dir->i_sb->s_flags & MS_RDONLY)) {		hpfs_error(result->i_sb, "ACLs or XPERM found. This is probably HPFS386. This driver doesn't support it now. Send me some info on these structures");		goto bail1;	}	/*	 * Fill in the info from the directory if this is a newly created	 * inode.	 */	if (!result->i_ctime) {		if (!(result->i_ctime = local_to_gmt(dir->i_sb, de->creation_date)))			result->i_ctime = 1;		result->i_mtime = local_to_gmt(dir->i_sb, de->write_date);		result->i_atime = local_to_gmt(dir->i_sb, de->read_date);		result->i_hpfs_ea_size = de->ea_size;		if (!result->i_hpfs_ea_mode && de->read_only)			result->i_mode &= ~0222;		if (!de->directory) {			if (result->i_size == -1) {				result->i_size = de->file_size;				result->i_data.a_ops = &hpfs_aops;				result->u.hpfs_i.mmu_private = result->i_size;			/*			 * i_blocks should count the fnode and any anodes.			 * We count 1 for the fnode and don't bother about			 * anodes -- the disk heads are on the directory band			 * and we want them to stay there.			 */				result->i_blocks = 1 + ((result->i_size + 511) >> 9);			}		}	}	hpfs_brelse4(&qbh);	/*	 * Made it.	 */	end:	hpfs_unlock_inode(dir);	end_add:	hpfs_set_dentry_operations(dentry);	d_add(dentry, result);	return NULL;	/*	 * Didn't.	 */	bail1:		hpfs_brelse4(&qbh);		/*bail:*/	hpfs_unlock_inode(dir);	return ERR_PTR(-ENOENT);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -