pmac_feature.h

嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使

/*
 * Definition of platform feature hooks for PowerMacs
 * 
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1998 Paul Mackerras &
 *                    Ben. Herrenschmidt.
 *                    
 *                    
 * Note: I removed media-bay details from the feature stuff, I beleive it's
 *       not worth it, the media-bay driver can directly use the mac-io
 *       ASIC registers.
 *       
 * Implementation note: Currently, none of these functions will block.
 * However, they may internally protect themselves with a spinlock
 * for way too long. Be prepared for at least some of these to block
 * in the future.
 * 
 * Unless specifically defined, the result code is assumed to be an
 * error when negative, 0 is the default success result. Some functions
 * may return additional positive result values.
 * 
 * To keep implementation simple, all feature calls are assumed to have
 * the prototype parameters (struct device_node* node, int value).
 * When either is not used, pass 0.
 */

#ifdef __KERNEL__
#ifndef __PPC_ASM_PMAC_FEATURE_H
#define __PPC_ASM_PMAC_FEATURE_H

/*
 * Known Mac motherboard models
 * 
 * Please, report any error here to [e-mail], thanks !
 */

/* PowerSurge are the first generation of PCI Pmacs. This include
 * all of the Grand-Central based machines
 */
#define PMAC_TYPE_PSURGE		0x10	/* PowerSurge */

/* Here is the infamous serie of OHare based machines
 */
#define PMAC_TYPE_COMET			0x20	/* Beleived to be PowerBook 2400 */
#define PMAC_TYPE_HOOPER		0x21	/* Beleived to be PowerBook 3400 */
#define PMAC_TYPE_KANGA			0x22	/* PowerBook 3500 (first G3) */
#define PMAC_TYPE_ALCHEMY		0x23	/* Alchemy motherboard base */
#define PMAC_TYPE_GAZELLE		0x24	/* Spartacus, some 5xxx/6xxx */
#define PMAC_TYPE_UNKNOWN_OHARE		0x2f	/* Unknown, but OHare based */

/* Here are the Heathrow based machines
 * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
 */
#define PMAC_TYPE_GOSSAMER		0x30	/* Gossamer motherboard */
#define PMAC_TYPE_SILK			0x31	/* Desktop PowerMac G3 */
#define PMAC_TYPE_WALLSTREET		0x32	/* Wallstreet/Mainstreet PowerBook*/
#define PMAC_TYPE_UNKNOWN_HEATHROW	0x3f	/* Unknown but heathrow based */

/* Here are newworld machines based on Paddington (heathrow derivative)
 */
#define PMAC_TYPE_101_PBOOK		0x40	/* 101 PowerBook (aka Lombard) */
#define PMAC_TYPE_ORIG_IMAC		0x41	/* First generation iMac */
#define PMAC_TYPE_YOSEMITE		0x42	/* B&W G3 */
#define PMAC_TYPE_YIKES			0x43	/* Yikes G4 (PCI graphics) */
#define PMAC_TYPE_UNKNOWN_PADDINGTON	0x4f	/* Unknown but paddington based */

/* Core99 machines based on UniNorth 1.0 and 1.5
 * 
 * Note: A single entry here may cover several actual models according
 * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
 * FireWire based iMacs, etc...). Those machines are too similar to be
 * distinguished here, when they need to be differencied, use the
 * device-tree "model" or "compatible" property.
 */
#define PMAC_TYPE_ORIG_IBOOK		0x40	/* First iBook model (no firewire) */
#define PMAC_TYPE_SAWTOOTH		0x41	/* Desktop G4s */
#define PMAC_TYPE_FW_IMAC		0x42	/* FireWire iMacs (except Pangea based) */
#define PMAC_TYPE_FW_IBOOK		0x43	/* FireWire iBooks (except iBook2) */
#define PMAC_TYPE_CUBE			0x44	/* Cube PowerMac */
#define PMAC_TYPE_QUICKSILVER		0x45	/* QuickSilver G4s */
#define PMAC_TYPE_PISMO			0x46	/* Pismo PowerBook */
#define PMAC_TYPE_TITANIUM		0x47	/* Titanium PowerBook */
#define PMAC_TYPE_TITANIUM2		0x48	/* Titanium II PowerBook */
#define PMAC_TYPE_UNKNOWN_CORE99	0x5f

/* MacRISC2 machines based on the Pangea chipset
 */
#define PMAC_TYPE_PANGEA_IMAC		0x100	/* Flower Power iMac */
#define PMAC_TYPE_IBOOK2		0x101	/* iBook2 (polycarbonate) */
#define PMAC_TYPE_UNKNOWN_PANGEA	0x10f

/*
 * Motherboard flags
 */

#define PMAC_MB_CAN_SLEEP		0x00000001
#define PMAC_MB_HAS_FW_POWER		0x00000002

/*
 * Feature calls supported on pmac
 * 	
 */

/*
 * Use this inline wrapper
 */
struct device_node;

static inline int pmac_call_feature(int selector, struct device_node* node,
					int param, int value)
{
	if (!ppc_md.feature_call)
		return -ENODEV;
	return ppc_md.feature_call(selector, node, param, value);
}

/* PMAC_FTR_SERIAL_ENABLE	(struct device_node* node, int param, int value)
 * enable/disable an SCC side. Pass the node corresponding to the
 * channel side as a parameter.
 * param is the type of port
 * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
 * for use by xmon.
 */
#define PMAC_FTR_SCC_ENABLE		PMAC_FTR_DEF(0)
	#define PMAC_SCC_ASYNC		0
	#define PMAC_SCC_IRDA		1
	#define PMAC_SCC_I2S1		2
	#define PMAC_SCC_FLAG_XMON	0x00001000

/* PMAC_FTR_MODEM_ENABLE	(struct device_node* node, 0, int value)
 * enable/disable the internal modem.
 */
#define PMAC_FTR_MODEM_ENABLE		PMAC_FTR_DEF(1)

/* PMAC_FTR_SWIM3_ENABLE	(struct device_node* node, 0,int value)
 * enable/disable the swim3 (floppy) cell of a mac-io ASIC
 */
#define PMAC_FTR_SWIM3_ENABLE		PMAC_FTR_DEF(2)

/* PMAC_FTR_MESH_ENABLE		(struct device_node* node, 0, int value)
 * enable/disable the mesh (scsi) cell of a mac-io ASIC
 */
#define PMAC_FTR_MESH_ENABLE		PMAC_FTR_DEF(3)

/* PMAC_FTR_IDE_ENABLE		(struct device_node* node, int busID, int value)
 * enable/disable an IDE port of a mac-io ASIC
 * pass the busID parameter
 */
#define PMAC_FTR_IDE_ENABLE		PMAC_FTR_DEF(4)

/* PMAC_FTR_IDE_RESET		(struct device_node* node, int busID, int value)
 * assert(1)/release(0) an IDE reset line (mac-io IDE only)
 */
#define PMAC_FTR_IDE_RESET		PMAC_FTR_DEF(5)

/* PMAC_FTR_BMAC_ENABLE		(struct device_node* node, 0, int value)
 * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
 * it's reset line
 */
#define PMAC_FTR_BMAC_ENABLE		PMAC_FTR_DEF(6)

/* PMAC_FTR_GMAC_ENABLE		(struct device_node* node, 0, int value)
 * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
 * control the cell's clock.
 */
#define PMAC_FTR_GMAC_ENABLE		PMAC_FTR_DEF(7)

/* PMAC_FTR_GMAC_PHY_RESET	(struct device_node* node, 0, 0)
 * Perform a HW reset of the PHY connected to a gmac controller.
 * Pass the gmac device node, not the PHY node.
 */
#define PMAC_FTR_GMAC_PHY_RESET		PMAC_FTR_DEF(8)

/* PMAC_FTR_SOUND_CHIP_ENABLE	(struct device_node* node, 0, int value)
 * enable/disable the sound chip, whatever it is and provided it can
 * acually be controlled
 */
#define PMAC_FTR_SOUND_CHIP_ENABLE	PMAC_FTR_DEF(9)

/* -- add various tweaks related to sound routing -- */
 
/* PMAC_FTR_AIRPORT_ENABLE	(struct device_node* node, 0, int value)
 * enable/disable the airport card
 */
#define PMAC_FTR_AIRPORT_ENABLE		PMAC_FTR_DEF(10)

/* PMAC_FTR_RESET_CPU		(NULL, int cpu_nr, 0)
 * toggle the reset line of a CPU on an uninorth-based SMP machine
 */
#define PMAC_FTR_RESET_CPU		PMAC_FTR_DEF(11)

/* PMAC_FTR_USB_ENABLE		(struct device_node* node, 0, int value)
 * enable/disable an USB cell, along with the power of the USB "pad"
 * on keylargo based machines
 */
#define PMAC_FTR_USB_ENABLE		PMAC_FTR_DEF(12)

/* PMAC_FTR_1394_ENABLE		(struct device_node* node, 0, int value)
 * enable/disable the firewire cell of an uninorth ASIC.
 */
#define PMAC_FTR_1394_ENABLE		PMAC_FTR_DEF(13)

/* PMAC_FTR_1394_CABLE_POWER	(struct device_node* node, 0, int value)
 * enable/disable the firewire cable power supply of the uninorth
 * firewire cell
 */
#define PMAC_FTR_1394_CABLE_POWER	PMAC_FTR_DEF(14)

/* PMAC_FTR_SLEEP_STATE		(struct device_node* node, 0, int value)
 * set the sleep state of the motherboard.
 * Pass -1 as value to query for sleep capability
 */
#define PMAC_FTR_SLEEP_STATE		PMAC_FTR_DEF(15)

/* PMAC_FTR_GET_MB_INFO		(NULL, selector, 0)
 * 
 * returns some motherboard infos.
 * selector: 0  - model id
 *           1  - model flags (capabilities)
 *           2  - model name (cast to const char *)
 */
#define PMAC_FTR_GET_MB_INFO		PMAC_FTR_DEF(16)
#define   PMAC_MB_INFO_MODEL	0
#define   PMAC_MB_INFO_FLAGS	1
#define   PMAC_MB_INFO_NAME	2

/* PMAC_FTR_READ_GPIO		(NULL, int index, 0)
 *
 * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
 * the value returned is a byte (positive), or a negative error code
 */
#define PMAC_FTR_READ_GPIO		PMAC_FTR_DEF(17)

/* PMAC_FTR_WRITE_GPIO		(NULL, int index, int value)
 *
 * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
 */
#define PMAC_FTR_WRITE_GPIO		PMAC_FTR_DEF(18)


/* Don't use those directly, they are for the sake of pmac_setup.c */
extern int pmac_do_feature_call(unsigned int selector, ...);
extern void pmac_feature_init(void);
extern void pmac_feature_late_init(void);

#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x))

#endif /* __PPC_ASM_PMAC_FEATURE_H */
#endif /* __KERNEL__ */