⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 cpm_8260.h

📁 嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使
💻 H
📖 第 1 页 / 共 2 页
字号:
	uint	sen_disfc;	/* discard frame counter */	ushort	sen_pads;	/* Tx short frame pad character */	ushort	sen_retlim;	/* Retry limit threshold */	ushort	sen_retcnt;	/* Retry limit counter */	ushort	sen_maxflr;	/* maximum frame length register */	ushort	sen_minflr;	/* minimum frame length register */	ushort	sen_maxd1;	/* maximum DMA1 length */	ushort	sen_maxd2;	/* maximum DMA2 length */	ushort	sen_maxd;	/* Rx max DMA */	ushort	sen_dmacnt;	/* Rx DMA counter */	ushort	sen_maxb;	/* Max BD byte count */	ushort	sen_gaddr1;	/* Group address filter */	ushort	sen_gaddr2;	ushort	sen_gaddr3;	ushort	sen_gaddr4;	uint	sen_tbuf0data0;	/* Save area 0 - current frame */	uint	sen_tbuf0data1;	/* Save area 1 - current frame */	uint	sen_tbuf0rba;	/* Internal */	uint	sen_tbuf0crc;	/* Internal */	ushort	sen_tbuf0bcnt;	/* Internal */	ushort	sen_paddrh;	/* physical address (MSB) */	ushort	sen_paddrm;	ushort	sen_paddrl;	/* physical address (LSB) */	ushort	sen_pper;	/* persistence */	ushort	sen_rfbdptr;	/* Rx first BD pointer */	ushort	sen_tfbdptr;	/* Tx first BD pointer */	ushort	sen_tlbdptr;	/* Tx last BD pointer */	uint	sen_tbuf1data0;	/* Save area 0 - current frame */	uint	sen_tbuf1data1;	/* Save area 1 - current frame */	uint	sen_tbuf1rba;	/* Internal */	uint	sen_tbuf1crc;	/* Internal */	ushort	sen_tbuf1bcnt;	/* Internal */	ushort	sen_txlen;	/* Tx Frame length counter */	ushort	sen_iaddr1;	/* Individual address filter */	ushort	sen_iaddr2;	ushort	sen_iaddr3;	ushort	sen_iaddr4;	ushort	sen_boffcnt;	/* Backoff counter */	/* NOTE: Some versions of the manual have the following items	 * incorrectly documented.  Below is the proper order.	 */	ushort	sen_taddrh;	/* temp address (MSB) */	ushort	sen_taddrm;	ushort	sen_taddrl;	/* temp address (LSB) */} scc_enet_t;/* SCC Event register as used by Ethernet.*/#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received *//* SCC Mode Register (PSMR) as used by Ethernet.*/#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable *//* Buffer descriptor control/status used by Ethernet receive. * Common to SCC and FCC. */#define BD_ENET_RX_EMPTY	((ushort)0x8000)#define BD_ENET_RX_WRAP		((ushort)0x2000)#define BD_ENET_RX_INTR		((ushort)0x1000)#define BD_ENET_RX_LAST		((ushort)0x0800)#define BD_ENET_RX_FIRST	((ushort)0x0400)#define BD_ENET_RX_MISS		((ushort)0x0100)#define BD_ENET_RX_BC		((ushort)0x0080)	/* FCC Only */#define BD_ENET_RX_MC		((ushort)0x0040)	/* FCC Only */#define BD_ENET_RX_LG		((ushort)0x0020)#define BD_ENET_RX_NO		((ushort)0x0010)#define BD_ENET_RX_SH		((ushort)0x0008)#define BD_ENET_RX_CR		((ushort)0x0004)#define BD_ENET_RX_OV		((ushort)0x0002)#define BD_ENET_RX_CL		((ushort)0x0001)#define BD_ENET_RX_STATS	((ushort)0x01ff)	/* All status bits *//* Buffer descriptor control/status used by Ethernet transmit. * Common to SCC and FCC. */#define BD_ENET_TX_READY	((ushort)0x8000)#define BD_ENET_TX_PAD		((ushort)0x4000)#define BD_ENET_TX_WRAP		((ushort)0x2000)#define BD_ENET_TX_INTR		((ushort)0x1000)#define BD_ENET_TX_LAST		((ushort)0x0800)#define BD_ENET_TX_TC		((ushort)0x0400)#define BD_ENET_TX_DEF		((ushort)0x0200)#define BD_ENET_TX_HB		((ushort)0x0100)#define BD_ENET_TX_LC		((ushort)0x0080)#define BD_ENET_TX_RL		((ushort)0x0040)#define BD_ENET_TX_RCMASK	((ushort)0x003c)#define BD_ENET_TX_UN		((ushort)0x0002)#define BD_ENET_TX_CSL		((ushort)0x0001)#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits *//* SCC as UART*/typedef struct scc_uart {	sccp_t	scc_genscc;	uint	scc_res1;	/* Reserved */	uint	scc_res2;	/* Reserved */	ushort	scc_maxidl;	/* Maximum idle chars */	ushort	scc_idlc;	/* temp idle counter */	ushort	scc_brkcr;	/* Break count register */	ushort	scc_parec;	/* receive parity error counter */	ushort	scc_frmec;	/* receive framing error counter */	ushort	scc_nosec;	/* receive noise counter */	ushort	scc_brkec;	/* receive break condition counter */	ushort	scc_brkln;	/* last received break length */	ushort	scc_uaddr1;	/* UART address character 1 */	ushort	scc_uaddr2;	/* UART address character 2 */	ushort	scc_rtemp;	/* Temp storage */	ushort	scc_toseq;	/* Transmit out of sequence char */	ushort	scc_char1;	/* control character 1 */	ushort	scc_char2;	/* control character 2 */	ushort	scc_char3;	/* control character 3 */	ushort	scc_char4;	/* control character 4 */	ushort	scc_char5;	/* control character 5 */	ushort	scc_char6;	/* control character 6 */	ushort	scc_char7;	/* control character 7 */	ushort	scc_char8;	/* control character 8 */	ushort	scc_rccm;	/* receive control character mask */	ushort	scc_rccr;	/* receive control character register */	ushort	scc_rlbc;	/* receive last break character */} scc_uart_t;/* SCC Event and Mask registers when it is used as a UART.*/#define UART_SCCM_GLR		((ushort)0x1000)#define UART_SCCM_GLT		((ushort)0x0800)#define UART_SCCM_AB		((ushort)0x0200)#define UART_SCCM_IDL		((ushort)0x0100)#define UART_SCCM_GRA		((ushort)0x0080)#define UART_SCCM_BRKE		((ushort)0x0040)#define UART_SCCM_BRKS		((ushort)0x0020)#define UART_SCCM_CCR		((ushort)0x0008)#define UART_SCCM_BSY		((ushort)0x0004)#define UART_SCCM_TX		((ushort)0x0002)#define UART_SCCM_RX		((ushort)0x0001)/* The SCC PMSR when used as a UART.*/#define SCU_PMSR_FLC		((ushort)0x8000)#define SCU_PMSR_SL		((ushort)0x4000)#define SCU_PMSR_CL		((ushort)0x3000)#define SCU_PMSR_UM		((ushort)0x0c00)#define SCU_PMSR_FRZ		((ushort)0x0200)#define SCU_PMSR_RZS		((ushort)0x0100)#define SCU_PMSR_SYN		((ushort)0x0080)#define SCU_PMSR_DRT		((ushort)0x0040)#define SCU_PMSR_PEN		((ushort)0x0010)#define SCU_PMSR_RPM		((ushort)0x000c)#define SCU_PMSR_REVP		((ushort)0x0008)#define SCU_PMSR_TPM		((ushort)0x0003)#define SCU_PMSR_TEVP		((ushort)0x0003)/* CPM Transparent mode SCC. */typedef struct scc_trans {	sccp_t	st_genscc;	uint	st_cpres;	/* Preset CRC */	uint	st_cmask;	/* Constant mask for CRC */} scc_trans_t;#define BD_SCC_TX_LAST		((ushort)0x0800)/* How about some FCCs.....*/#define FCC_GFMR_DIAG_NORM	((uint)0x00000000)#define FCC_GFMR_DIAG_LE	((uint)0x40000000)#define FCC_GFMR_DIAG_AE	((uint)0x80000000)#define FCC_GFMR_DIAG_ALE	((uint)0xc0000000)#define FCC_GFMR_TCI		((uint)0x20000000)#define FCC_GFMR_TRX		((uint)0x10000000)#define FCC_GFMR_TTX		((uint)0x08000000)#define FCC_GFMR_TTX		((uint)0x08000000)#define FCC_GFMR_CDP		((uint)0x04000000)#define FCC_GFMR_CTSP		((uint)0x02000000)#define FCC_GFMR_CDS		((uint)0x01000000)#define FCC_GFMR_CTSS		((uint)0x00800000)#define FCC_GFMR_SYNL_NONE	((uint)0x00000000)#define FCC_GFMR_SYNL_AUTO	((uint)0x00004000)#define FCC_GFMR_SYNL_8		((uint)0x00008000)#define FCC_GFMR_SYNL_16	((uint)0x0000c000)#define FCC_GFMR_RTSM		((uint)0x00002000)#define FCC_GFMR_RENC_NRZ	((uint)0x00000000)#define FCC_GFMR_RENC_NRZI	((uint)0x00000800)#define FCC_GFMR_REVD		((uint)0x00000400)#define FCC_GFMR_TENC_NRZ	((uint)0x00000000)#define FCC_GFMR_TENC_NRZI	((uint)0x00000100)#define FCC_GFMR_TCRC_16	((uint)0x00000000)#define FCC_GFMR_TCRC_32	((uint)0x00000080)#define FCC_GFMR_ENR		((uint)0x00000020)#define FCC_GFMR_ENT		((uint)0x00000010)#define FCC_GFMR_MODE_ENET	((uint)0x0000000c)#define FCC_GFMR_MODE_ATM	((uint)0x0000000a)#define FCC_GFMR_MODE_HDLC	((uint)0x00000000)/* Generic FCC parameter ram.*/typedef struct fcc_param {	ushort	fcc_riptr;	/* Rx Internal temp pointer */	ushort	fcc_tiptr;	/* Tx Internal temp pointer */	ushort	fcc_res1;	ushort	fcc_mrblr;	/* Max receive buffer length, mod 32 bytes */	uint	fcc_rstate;	/* Upper byte is Func code, must be set */	uint	fcc_rbase;	/* Receive BD base */	ushort	fcc_rbdstat;	/* RxBD status */	ushort	fcc_rbdlen;	/* RxBD down counter */	uint	fcc_rdptr;	/* RxBD internal data pointer */	uint	fcc_tstate;	/* Upper byte is Func code, must be set */	uint	fcc_tbase;	/* Transmit BD base */	ushort	fcc_tbdstat;	/* TxBD status */	ushort	fcc_tbdlen;	/* TxBD down counter */	uint	fcc_tdptr;	/* TxBD internal data pointer */	uint	fcc_rbptr;	/* Rx BD Internal buf pointer */	uint	fcc_tbptr;	/* Tx BD Internal buf pointer */	uint	fcc_rcrc;	/* Rx temp CRC */	uint	fcc_res2;	uint	fcc_tcrc;	/* Tx temp CRC */} fccp_t;/* Ethernet controller through FCC.*/typedef struct fcc_enet {	fccp_t	fen_genfcc;	uint	fen_statbuf;	/* Internal status buffer */	uint	fen_camptr;	/* CAM address */	uint	fen_cmask;	/* Constant mask for CRC */	uint	fen_cpres;	/* Preset CRC */	uint	fen_crcec;	/* CRC Error counter */	uint	fen_alec;	/* alignment error counter */	uint	fen_disfc;	/* discard frame counter */	ushort	fen_retlim;	/* Retry limit */	ushort	fen_retcnt;	/* Retry counter */	ushort	fen_pper;	/* Persistence */	ushort	fen_boffcnt;	/* backoff counter */	uint	fen_gaddrh;	/* Group address filter, high 32-bits */	uint	fen_gaddrl;	/* Group address filter, low 32-bits */	ushort	fen_tfcstat;	/* out of sequence TxBD */	ushort	fen_tfclen;	uint	fen_tfcptr;	ushort	fen_mflr;	/* Maximum frame length (1518) */	ushort	fen_paddrh;	/* MAC address */	ushort	fen_paddrm;	ushort	fen_paddrl;	ushort	fen_ibdcount;	/* Internal BD counter */	ushort	fen_idbstart;	/* Internal BD start pointer */	ushort	fen_ibdend;	/* Internal BD end pointer */	ushort	fen_txlen;	/* Internal Tx frame length counter */	uint	fen_ibdbase[8]; /* Internal use */	uint	fen_iaddrh;	/* Individual address filter */	uint	fen_iaddrl;	ushort	fen_minflr;	/* Minimum frame length (64) */	ushort	fen_taddrh;	/* Filter transfer MAC address */	ushort	fen_taddrm;	ushort	fen_taddrl;	ushort	fen_padptr;	/* Pointer to pad byte buffer */	ushort	fen_cftype;	/* control frame type */	ushort	fen_cfrange;	/* control frame range */	ushort	fen_maxb;	/* maximum BD count */	ushort	fen_maxd1;	/* Max DMA1 length (1520) */	ushort	fen_maxd2;	/* Max DMA2 length (1520) */	ushort	fen_maxd;	/* internal max DMA count */	ushort	fen_dmacnt;	/* internal DMA counter */	uint	fen_octc;	/* Total octect counter */	uint	fen_colc;	/* Total collision counter */	uint	fen_broc;	/* Total broadcast packet counter */	uint	fen_mulc;	/* Total multicast packet count */	uint	fen_uspc;	/* Total packets < 64 bytes */	uint	fen_frgc;	/* Total packets < 64 bytes with errors */	uint	fen_ospc;	/* Total packets > 1518 */	uint	fen_jbrc;	/* Total packets > 1518 with errors */	uint	fen_p64c;	/* Total packets == 64 bytes */	uint	fen_p65c;	/* Total packets 64 < bytes <= 127 */	uint	fen_p128c;	/* Total packets 127 < bytes <= 255 */	uint	fen_p256c;	/* Total packets 256 < bytes <= 511 */	uint	fen_p512c;	/* Total packets 512 < bytes <= 1023 */	uint	fen_p1024c;	/* Total packets 1024 < bytes <= 1518 */	uint	fen_cambuf;	/* Internal CAM buffer poiner */	ushort	fen_rfthr;	/* Received frames threshold */	ushort	fen_rfcnt;	/* Received frames count */} fcc_enet_t;/* FCC Event/Mask register as used by Ethernet.*/#define FCC_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */#define FCC_ENET_RXC	((ushort)0x0040)	/* Control Frame Received */#define FCC_ENET_TXC	((ushort)0x0020)	/* Out of seq. Tx sent */#define FCC_ENET_TXE	((ushort)0x0010)	/* Transmit Error */#define FCC_ENET_RXF	((ushort)0x0008)	/* Full frame received */#define FCC_ENET_BSY	((ushort)0x0004)	/* Busy.  Rx Frame dropped */#define FCC_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */#define FCC_ENET_RXB	((ushort)0x0001)	/* A buffer was received *//* FCC Mode Register (FPSMR) as used by Ethernet.*/#define FCC_PSMR_HBC	((uint)0x80000000)	/* Enable heartbeat */#define FCC_PSMR_FC	((uint)0x40000000)	/* Force Collision */#define FCC_PSMR_SBT	((uint)0x20000000)	/* Stop backoff timer */#define FCC_PSMR_LPB	((uint)0x10000000)	/* Local protect. 1 = FDX */#define FCC_PSMR_LCW	((uint)0x08000000)	/* Late collision select */#define FCC_PSMR_FDE	((uint)0x04000000)	/* Full Duplex Enable */#define FCC_PSMR_MON	((uint)0x02000000)	/* RMON Enable */#define FCC_PSMR_PRO	((uint)0x00400000)	/* Promiscuous Enable */#define FCC_PSMR_FCE	((uint)0x00200000)	/* Flow Control Enable */#define FCC_PSMR_RSH	((uint)0x00100000)	/* Receive Short Frames */#define FCC_PSMR_CAM	((uint)0x00000400)	/* CAM enable */#define FCC_PSMR_BRO	((uint)0x00000200)	/* Broadcast pkt discard */#define FCC_PSMR_ENCRC	((uint)0x00000080)	/* Use 32-bit CRC *//* IIC parameter RAM.*/typedef struct iic {	ushort	iic_rbase;	/* Rx Buffer descriptor base address */	ushort	iic_tbase;	/* Tx Buffer descriptor base address */	u_char	iic_rfcr;	/* Rx function code */	u_char	iic_tfcr;	/* Tx function code */	ushort	iic_mrblr;	/* Max receive buffer length */	uint	iic_rstate;	/* Internal */	uint	iic_rdp;	/* Internal */	ushort	iic_rbptr;	/* Internal */	ushort	iic_rbc;	/* Internal */	uint	iic_rxtmp;	/* Internal */	uint	iic_tstate;	/* Internal */	uint	iic_tdp;	/* Internal */	ushort	iic_tbptr;	/* Internal */	ushort	iic_tbc;	/* Internal */	uint	iic_txtmp;	/* Internal */} iic_t;#define BD_IIC_START		((ushort)0x0400)#endif /* __CPM_82XX__ */#endif /* __KERNEL__ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -