⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 m48t35.h

📁 嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使
💻 H
字号:
/* * BK Id: SCCS/s.m48t35.h 1.8 10/16/01 15:58:42 trini *//* *  Registers for the SGS-Thomson M48T35 Timekeeper RAM chip *  and *  Registers for the SGS-Thomson M48T37 Timekeeper RAM chip *  The 37 is the 35 plus alarm and century thus the offsets *  are shifted by the extra registers. */#ifndef __PPC_M48T35_H#define __PPC_M48T35_H/* RTC offsets */#define M48T35_RTC_FLAGS	(-8)	/* the negative regs are really T37 only */ #define M48T35_RTC_CENTURY	(-7)#define M48T35_RTC_AL_SEC	(-6)    #define M48T35_RTC_AL_MIN	(-5)    #define M48T35_RTC_AL_HRS	(-4)    #define M48T35_RTC_AL_DOM	(-3)    #define M48T35_RTC_INTERRUPT	(-2)#define M48T35_RTC_WATCHDOG	(-1)#define M48T35_RTC_CONTROL	0	/* T35 starts here */ #define M48T35_RTC_SECONDS	1#define M48T35_RTC_MINUTES	2#define M48T35_RTC_HOURS	3#define M48T35_RTC_DAY		4#define M48T35_RTC_DOM		5#define M48T35_RTC_MONTH	6#define M48T35_RTC_YEAR		7/* this way help us know which bits go with which regs */ #define M48T35_RTC_FLAGS_BL           0x10#define M48T35_RTC_FLAGS_AF           0x40#define M48T35_RTC_FLAGS_WDF          0x80#define M48T35_RTC_INTERRUPT_AFE       0x80#define M48T35_RTC_INTERRUPT_ABE       0x20#define M48T35_RTC_INTERRUPT_ALL       (M48T35_RTC_INTERRUPT_AFE|M48T35_RTC_INTERRUPT_ABE)#define M48T35_RTC_WATCHDOG_RB         0x03#define M48T35_RTC_WATCHDOG_BMB        0x7c#define M48T35_RTC_WATCHDOG_WDS        0x80#define M48T35_RTC_WATCHDOG_ALL        (M48T35_RTC_WATCHDOG_RB|M48T35_RTC_WATCHDOG_BMB|M48T35_RTC_W#define M48T35_RTC_CONTROL_WRITE       0x80#define M48T35_RTC_CONTROL_READ        0x40#define M48T35_RTC_CONTROL_CAL_SIGN    0x20    #define M48T35_RTC_CONTROL_CAL_VALUE   0x1f#define M48T35_RTC_CONTROL_LOCKED      (M48T35_RTC_WRITE|M48T35_RTC_READ)#define M48T35_RTC_CONTROL_CALIBRATION (M48T35_RTC_CONTROL_CAL_SIGN|M48T35_RTC_CONTROL_CAL_VALUE)#define M48T35_RTC_SECONDS_SEC_1       0x0f#define M48T35_RTC_SECONDS_SEC_10      0x70    #define M48T35_RTC_SECONDS_ST          0x80#define M48T35_RTC_SECONDS_SEC_ALL     (M48T35_RTC_SECONDS_SEC_1|M48T35_RTC_SECONDS_SEC_10)#define M48T35_RTC_MINUTES_MIN_1       0x0f#define M48T35_RTC_MINUTES_MIN_10      0x70    #define M48T35_RTC_MINUTES_MIN_ALL     (M48T35_RTC_MINUTES_MIN_1|M48T35_RTC_MINUTES_MIN_10)#define M48T35_RTC_HOURS_HRS_1         0x0f#define M48T35_RTC_HOURS_HRS_10        0x30#define M48T35_RTC_HOURS_HRS_ALL       (M48T35_RTC_HOURS_HRS_1|M48T35_RTC_HOURS_HRS_10)#define M48T35_RTC_DAY_DAY_1           0x03#define M48T35_RTC_DAY_FT              0x40#define M48T35_RTC_ALARM_OFF           0x00#define M48T35_RTC_WATCHDOG_OFF        0x00/* legacy */#define M48T35_RTC_SET      0x80#define M48T35_RTC_STOPPED  0x80#define M48T35_RTC_READ     0x40/* read/write conversions */#ifndef BCD_TO_BIN#define BCD_TO_BIN(x)   ((x)=((x)&15) + ((x)>>4)*10)#endif#ifndef BIN_TO_BCD#define BIN_TO_BCD(x)   ((x)=(((x)/10)<<4) + (x)%10)#endif#endif

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -