⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 io.h

📁 嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使
💻 H
字号:
#ifndef __ASM_SH_IO_H#define __ASM_SH_IO_H/* * Convention: *    read{b,w,l}/write{b,w,l} are for PCI, *    while in{b,w,l}/out{b,w,l} are for ISA * These may (will) be platform specific function. * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p * and 'string' versions: ins{b,w,l}/outs{b,w,l} * For read{b,w,l} and write{b,w,l} there are also __raw versions, which * do not have a memory barrier after them. * * In addition, we have  *   ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O. *   which are processor specific. *//* * We follow the Alpha convention here: *  __inb expands to an inline function call (which either calls via the *        mach_vec if generic, or a machine specific implementation) *  _inb  is a real function call (note ___raw fns are _ version of __raw) *  inb   by default expands to _inb, but the machine specific code may *        define it to __inb if it chooses. */#include <asm/cache.h>#include <asm/system.h>#include <linux/config.h>/* * Depending on which platform we are running on, we need different * I/O functions. */#ifdef __KERNEL__#if defined(CONFIG_SH_GENERIC) || defined(CONFIG_SH_CQREEK) || defined(CONFIG_SH_UNKNOWN)/* In a generic kernel, we always go through the machine vector.  */#include <asm/machvec.h># define __inb(p)	sh_mv.mv_inb((p))# define __inw(p)	sh_mv.mv_inw((p))# define __inl(p)	sh_mv.mv_inl((p))# define __outb(x,p)	sh_mv.mv_outb((x),(p))# define __outw(x,p)	sh_mv.mv_outw((x),(p))# define __outl(x,p)	sh_mv.mv_outl((x),(p))# define __inb_p(p)	sh_mv.mv_inb_p((p))# define __inw_p(p)	sh_mv.mv_inw_p((p))# define __inl_p(p)	sh_mv.mv_inl_p((p))# define __outb_p(x,p)	sh_mv.mv_outb_p((x),(p))# define __outw_p(x,p)	sh_mv.mv_outw_p((x),(p))# define __outl_p(x,p)	sh_mv.mv_outl_p((x),(p))#define __insb(p,b,c)	sh_mv.mv_insb((p), (b), (c))#define __insw(p,b,c)	sh_mv.mv_insw((p), (b), (c))#define __insl(p,b,c)	sh_mv.mv_insl((p), (b), (c))#define __outsb(p,b,c)	sh_mv.mv_outsb((p), (b), (c))#define __outsw(p,b,c)	sh_mv.mv_outsw((p), (b), (c))#define __outsl(p,b,c)	sh_mv.mv_outsl((p), (b), (c))# define __readb(a)	sh_mv.mv_readb((a))# define __readw(a)	sh_mv.mv_readw((a))# define __readl(a)	sh_mv.mv_readl((a))# define __writeb(v,a)	sh_mv.mv_writeb((v),(a))# define __writew(v,a)	sh_mv.mv_writew((v),(a))# define __writel(v,a)	sh_mv.mv_writel((v),(a))# define __ioremap(a,s)	sh_mv.mv_ioremap((a), (s))# define __iounmap(a)	sh_mv.mv_iounmap((a))# define __isa_port2addr(a)	sh_mv.mv_isa_port2addr(a)# define inb		__inb# define inw		__inw# define inl		__inl# define outb		__outb# define outw		__outw# define outl		__outl# define inb_p		__inb_p# define inw_p		__inw_p# define inl_p		__inl_p# define outb_p		__outb_p# define outw_p		__outw_p# define outl_p		__outl_p# define insb		__insb# define insw		__insw# define insl		__insl# define outsb		__outsb# define outsw		__outsw# define outsl		__outsl# define __raw_readb	__readb# define __raw_readw	__readw# define __raw_readl	__readl# define __raw_writeb	__writeb# define __raw_writew	__writew# define __raw_writel	__writel#else/* Control operations through platform specific headers */# define __WANT_IO_DEF# if defined(CONFIG_SH_HP600)#  include <asm/io_hd64461.h># elif defined(CONFIG_SH_SOLUTION_ENGINE)#  include <asm/io_se.h># elif defined(CONFIG_SH_SH2000)#  include <asm/io_sh2000.h># elif defined(CONFIG_SH_DMIDA) || \       defined(CONFIG_SH_STB1_HARP) || \       defined(CONFIG_SH_STB1_OVERDRIVE)#  include <asm/io_hd64465.h># elif defined(CONFIG_SH_EC3104)#  include <asm/io_ec3104.h># elif defined(CONFIG_SH_DREAMCAST)#  include <asm/io_dc.h># elif defined(CONFIG_SH_CAT68701)#  include <asm/io_cat68701.h># elif defined(CONFIG_SH_BIGSUR)#  include <asm/io_bigsur.h># elif defined(CONFIG_SH_7751_SOLUTION_ENGINE)#  include <asm/io_7751se.h># elif defined(CONFIG_SH_ADX)#  include <asm/io_adx.h># elif defined(CONFIG_SH_UNKNOWN)#  include <asm/io_unknown.h># else#  error "What system is this?"#endif#undef __WANT_IO_DEF#endif /* GENERIC */#endif /* __KERNEL__ *//* These are always function calls, in both kernel and user space */extern unsigned char	_inb (unsigned long port);extern unsigned short	_inw (unsigned long port);extern unsigned int	_inl (unsigned long port);extern void		_outb (unsigned char b, unsigned long port);extern void		_outw (unsigned short w, unsigned long port);extern void		_outl (unsigned int l, unsigned long port);extern unsigned char	_inb_p (unsigned long port);extern unsigned short	_inw_p (unsigned long port);extern unsigned int	_inl_p (unsigned long port);extern void		_outb_p (unsigned char b, unsigned long port);extern void		_outw_p (unsigned short w, unsigned long port);extern void		_outl_p (unsigned int l, unsigned long port);extern void		_insb (unsigned long port, void *dst, unsigned long count);extern void		_insw (unsigned long port, void *dst, unsigned long count);extern void		_insl (unsigned long port, void *dst, unsigned long count);extern void		_outsb (unsigned long port, const void *src, unsigned long count);extern void		_outsw (unsigned long port, const void *src, unsigned long count);extern void		_outsl (unsigned long port, const void *src, unsigned long count);extern unsigned char	_readb(unsigned long addr);extern unsigned short	_readw(unsigned long addr);extern unsigned int	_readl(unsigned long addr);extern void		_writeb(unsigned char b, unsigned long addr);extern void		_writew(unsigned short b, unsigned long addr);extern void		_writel(unsigned int b, unsigned long addr);#ifdef __KERNEL__extern unsigned char	___raw_readb(unsigned long addr);extern unsigned short	___raw_readw(unsigned long addr);extern unsigned int	___raw_readl(unsigned long addr);extern void		___raw_writeb(unsigned char b, unsigned long addr);extern void		___raw_writew(unsigned short b, unsigned long addr);extern void		___raw_writel(unsigned int b, unsigned long addr);#endif#ifdef __KERNEL__/* * The platform header files may define some of these macros to use * the inlined versions where appropriate.  These macros may also be * redefined by userlevel programs. */#ifndef inb# define inb(p)		_inb(p)#endif#ifndef inw# define inw(p)		_inw(p)#endif#ifndef inl# define inl(p)		_inl(p)#endif#ifndef outb# define outb(b,p)	_outb((b),(p))#endif#ifndef outw# define outw(w,p)	_outw((w),(p))#endif#ifndef outl# define outl(l,p)	_outl((l),(p))#endif#ifndef inb_p# define inb_p		_inb_p#endif#ifndef inw_p# define inw_p		_inw_p#endif#ifndef inl_p# define inl_p		_inl_p#endif#ifndef outb_p# define outb_p		_outb_p#endif#ifndef outw_p# define outw_p		_outw_p#endif#ifndef outl_p# define outl_p		_outl_p#endif#ifndef insb# define insb(p,d,c)	_insb((p),(d),(c))#endif#ifndef insw# define insw(p,d,c)	_insw((p),(d),(c))#endif#ifndef insl# define insl(p,d,c)	_insl((p),(d),(c))#endif#ifndef outsb# define outsb(p,s,c)	_outsb((p),(s),(c))#endif#ifndef outsw# define outsw(p,s,c)	_outsw((p),(s),(c))#endif#ifndef outsl# define outsl(p,s,c)	_outsl((p),(s),(c))#endif#ifdef __raw_readb# define readb(a)	({ unsigned long r_ = __raw_readb(a); mb(); r_; })#endif#ifdef __raw_readw# define readw(a)	({ unsigned long r_ = __raw_readw(a); mb(); r_; })#endif#ifdef __raw_readl# define readl(a)	({ unsigned long r_ = __raw_readl(a); mb(); r_; })#endif#ifdef __raw_writeb# define writeb(v,a)	({ __raw_writeb((v),(a)); mb(); })#endif#ifdef __raw_writew# define writew(v,a)	({ __raw_writew((v),(a)); mb(); })#endif#ifdef __raw_writel# define writel(v,a)	({ __raw_writel((v),(a)); mb(); })#endif#ifndef __raw_readb# define __raw_readb(a)	___raw_readb((unsigned long)(a))#endif#ifndef __raw_readw# define __raw_readw(a)	___raw_readw((unsigned long)(a))#endif#ifndef __raw_readl# define __raw_readl(a)	___raw_readl((unsigned long)(a))#endif#ifndef __raw_writeb# define __raw_writeb(v,a)  ___raw_writeb((v),(unsigned long)(a))#endif#ifndef __raw_writew# define __raw_writew(v,a)  ___raw_writew((v),(unsigned long)(a))#endif#ifndef __raw_writel# define __raw_writel(v,a)  ___raw_writel((v),(unsigned long)(a))#endif#ifndef readb# define readb(a)	_readb((unsigned long)(a))#endif#ifndef readw# define readw(a)	_readw((unsigned long)(a))#endif#ifndef readl# define readl(a)	_readl((unsigned long)(a))#endif#ifndef writeb# define writeb(v,a)	_writeb((v),(unsigned long)(a))#endif#ifndef writew# define writew(v,a)	_writew((v),(unsigned long)(a))#endif#ifndef writel# define writel(v,a)	_writel((v),(unsigned long)(a))#endif#else /* Userspace declarations.  */extern unsigned char	inb(unsigned long port);extern unsigned short	inw(unsigned long port);extern unsigned int	inl(unsigned long port);extern void		outb(unsigned char b, unsigned long port);extern void		outw(unsigned short w, unsigned long port);extern void		outl(unsigned int l, unsigned long port);extern void		insb(unsigned long port, void *dst, unsigned long count);extern void		insw(unsigned long port, void *dst, unsigned long count);extern void		insl(unsigned long port, void *dst, unsigned long count);extern void		outsb(unsigned long port, const void *src, unsigned long count);extern void		outsw(unsigned long port, const void *src, unsigned long count);extern void		outsl(unsigned long port, const void *src, unsigned long count);extern unsigned char	readb(unsigned long addr);extern unsigned short	readw(unsigned long addr);extern unsigned long	readl(unsigned long addr);extern void		writeb(unsigned char b, unsigned long addr);extern void		writew(unsigned short b, unsigned long addr);extern void		writel(unsigned int b, unsigned long addr);#endif /* __KERNEL__ */#ifdef __KERNEL__/* * If the platform has PC-like I/O, this function converts the offset into * an address. */static __inline__ unsigned long isa_port2addr(unsigned long offset){	return __isa_port2addr(offset);}#define isa_readb(a) readb(isa_port2addr(a))#define isa_readw(a) readw(isa_port2addr(a))#define isa_readl(a) readl(isa_port2addr(a))#define isa_writeb(b,a) writeb(b,isa_port2addr(a))#define isa_writew(w,a) writew(w,isa_port2addr(a))#define isa_writel(l,a) writel(l,isa_port2addr(a))#define isa_memset_io(a,b,c) \  memset((void *)(isa_port2addr((unsigned long)a)),(b),(c))#define isa_memcpy_fromio(a,b,c) \  memcpy((a),(void *)(isa_port2addr((unsigned long)(b))),(c))#define isa_memcpy_toio(a,b,c) \  memcpy((void *)(isa_port2addr((unsigned long)(a))),(b),(c))/* We really want to try and get these to memcpy etc */extern void memcpy_fromio(void *, unsigned long, unsigned long);extern void memcpy_toio(unsigned long, const void *, unsigned long);extern void memset_io(unsigned long, int, unsigned long);/* SuperH on-chip I/O functions */static __inline__ unsigned char ctrl_inb(unsigned long addr){	return *(volatile unsigned char*)addr;}static __inline__ unsigned short ctrl_inw(unsigned long addr){	return *(volatile unsigned short*)addr;}static __inline__ unsigned int ctrl_inl(unsigned long addr){	return *(volatile unsigned long*)addr;}static __inline__ void ctrl_outb(unsigned char b, unsigned long addr){	*(volatile unsigned char*)addr = b;}static __inline__ void ctrl_outw(unsigned short b, unsigned long addr){	*(volatile unsigned short*)addr = b;}static __inline__ void ctrl_outl(unsigned int b, unsigned long addr){        *(volatile unsigned long*)addr = b;}#define IO_SPACE_LIMIT 0xffffffff#include <asm/addrspace.h>/* * Change virtual addresses to physical addresses and vv. * These are trivial on the 1:1 Linux/SuperH mapping */static __inline__ unsigned long virt_to_phys(volatile void * address){	return PHYSADDR(address);}static __inline__ void * phys_to_virt(unsigned long address){	return (void *)P1SEGADDR(address);}#define virt_to_bus virt_to_phys#define bus_to_virt phys_to_virt#define page_to_bus page_to_phys/* * readX/writeX() are used to access memory mapped devices. On some * architectures the memory mapped IO stuff needs to be accessed * differently. On the x86 architecture, we just read/write the * memory location directly. * * On SH, we have the whole physical address space mapped at all times * (as MIPS does), so "ioremap()" and "iounmap()" do not need to do * anything.  (This isn't true for all machines but we still handle * these cases with wired TLB entries anyway ...) * * We cheat a bit and always return uncachable areas until we've fixed * the drivers to handle caching properly.   */static __inline__ void * ioremap(unsigned long offset, unsigned long size){	return __ioremap(offset, size);}static __inline__ void iounmap(void *addr){	return __iounmap(addr);}#define ioremap_nocache(off,size) ioremap(off,size)static __inline__ int check_signature(unsigned long io_addr,			const unsigned char *signature, int length){	int retval = 0;	do {		if (readb(io_addr) != *signature)			goto out;		io_addr++;		signature++;		length--;	} while (length);	retval = 1;out:	return retval;}/* * The caches on some architectures aren't dma-coherent and have need to * handle this in software.  There are three types of operations that * can be applied to dma buffers. * *  - dma_cache_wback_inv(start, size) makes caches and RAM coherent by *    writing the content of the caches back to memory, if necessary. *    The function also invalidates the affected part of the caches as *    necessary before DMA transfers from outside to memory. *  - dma_cache_inv(start, size) invalidates the affected parts of the *    caches.  Dirty lines of the caches may be written back or simply *    be discarded.  This operation is necessary before dma operations *    to the memory. *  - dma_cache_wback(start, size) writes back any dirty lines but does *    not invalidate the cache.  This can be used before DMA reads from *    memory, */#define dma_cache_wback_inv(_start,_size) \    __flush_purge_region(_start,_size)#define dma_cache_inv(_start,_size) \    __flush_invalidate_region(_start,_size)#define dma_cache_wback(_start,_size) \    __flush_wback_region(_start,_size)#endif /* __KERNEL__ */#endif /* __ASM_SH_IO_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -