floppy.h

嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使

/*
 * Architecture specific parts of the Floppy driver
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1995
 */
#ifndef __ASM_ALPHA_FLOPPY_H
#define __ASM_ALPHA_FLOPPY_H

#include <linux/config.h>

#define fd_inb(port)			inb_p(port)
#define fd_outb(port,value)		outb_p(port,value)

#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
#define fd_disable_dma()        disable_dma(FLOPPY_DMA)
#define fd_request_dma()        request_dma(FLOPPY_DMA,"floppy")
#define fd_free_dma()           free_dma(FLOPPY_DMA)
#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,virt_to_bus(addr))
#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
#define fd_cacheflush(addr,size) /* nothing */
#define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt, \
					    SA_INTERRUPT|SA_SAMPLE_RANDOM, \
				            "floppy", NULL)
#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);

#ifdef CONFIG_PCI

#include <linux/pci.h>

#define fd_dma_setup(addr,size,mode,io) alpha_fd_dma_setup(addr,size,mode,io)

static __inline__ int 
alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
{
	static unsigned long prev_size;
	static dma_addr_t bus_addr = 0;
	static char *prev_addr;
	static int prev_dir;
	int dir;

	dir = (mode != DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;

	if (bus_addr 
	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
		/* different from last time -- unmap prev */
		pci_unmap_single(NULL, bus_addr, prev_size, prev_dir);
		bus_addr = 0;
	}

	if (!bus_addr)	/* need to map it */
		bus_addr = pci_map_single(NULL, addr, size, dir);

	/* remember this one as prev */
	prev_addr = addr;
	prev_size = size;
	prev_dir = dir;

	fd_clear_dma_ff();
	fd_cacheflush(addr, size);
	fd_set_dma_mode(mode);
	set_dma_addr(FLOPPY_DMA, bus_addr);
	fd_set_dma_count(size);
	virtual_dma_port = io;
	fd_enable_dma();

	return 0;
}

#endif /* CONFIG_PCI */

__inline__ void virtual_dma_init(void)
{
	/* Nothing to do on an Alpha */
}

static int FDC1 = 0x3f0;
static int FDC2 = -1;

/*
 * Again, the CMOS information doesn't work on the alpha..
 */
#define FLOPPY0_TYPE 6
#define FLOPPY1_TYPE 0

#define N_FDC 2
#define N_DRIVE 8

#define FLOPPY_MOTOR_MASK 0xf0

/*
 * Most Alphas have no problems with floppy DMA crossing 64k borders,
 * except for XL and RUFFIAN.  They are also the only one with DMA
 * limits, so we use that to test in the generic kernel.
 */

#define __CROSS_64KB(a,s)					\
({ unsigned long __s64 = (unsigned long)(a);			\
   unsigned long __e64 = __s64 + (unsigned long)(s) - 1;	\
   (__s64 ^ __e64) & ~0xfffful; })

#ifdef CONFIG_ALPHA_GENERIC
# define CROSS_64KB(a,s)   (__CROSS_64KB(a,s) && ~alpha_mv.max_dma_address)
#else
# if defined(CONFIG_ALPHA_XL) || defined(CONFIG_ALPHA_RUFFIAN) || defined(CONFIG_ALPHA_NAUTILUS)
#  define CROSS_64KB(a,s)  __CROSS_64KB(a,s)
# else
#  define CROSS_64KB(a,s)  (0)
# endif
#endif

#define EXTRA_FLOPPY_PARAMS

#endif /* __ASM_ALPHA_FLOPPY_H */