⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pgalloc.h

📁 嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使
💻 H
字号:
#ifndef M68K_PGALLOC_H#define M68K_PGALLOC_H#include <linux/config.h>#include <asm/setup.h>#include <asm/virtconvert.h>/* * Cache handling functions */#define flush_icache()						\({								\	if (CPU_IS_040_OR_060)					\		__asm__ __volatile__("nop\n\t"			\				     ".chip 68040\n\t"		\				     "cinva %%ic\n\t"		\				     ".chip 68k" : );		\	else {							\		unsigned long _tmp;				\		__asm__ __volatile__("movec %%cacr,%0\n\t"	\				     "orw %1,%0\n\t"		\				     "movec %0,%%cacr"		\				     : "=&d" (_tmp)		\				     : "id" (FLUSH_I));	\	}							\})/* * invalidate the cache for the specified memory range. * It starts at the physical address specified for * the given number of bytes. */extern void cache_clear(unsigned long paddr, int len);/* * push any dirty cache in the specified memory range. * It starts at the physical address specified for * the given number of bytes. */extern void cache_push(unsigned long paddr, int len);/* * push and invalidate pages in the specified user virtual * memory range. */extern void cache_push_v(unsigned long vaddr, int len);/* cache code */#define FLUSH_I_AND_D	(0x00000808)#define FLUSH_I 	(0x00000008)/* This is needed whenever the virtual mapping of the current   process changes.  */#define __flush_cache_all()					\({								\	if (CPU_IS_040_OR_060)					\		__asm__ __volatile__("nop\n\t"			\				     ".chip 68040\n\t"		\				     "cpusha %dc\n\t"		\				     ".chip 68k");		\	else {							\		unsigned long _tmp;				\		__asm__ __volatile__("movec %%cacr,%0\n\t"	\				     "orw %1,%0\n\t"		\				     "movec %0,%%cacr"		\				     : "=&d" (_tmp)		\				     : "di" (FLUSH_I_AND_D));	\	}							\})#define __flush_cache_030()					\({								\	if (CPU_IS_020_OR_030) {				\		unsigned long _tmp;				\		__asm__ __volatile__("movec %%cacr,%0\n\t"	\				     "orw %1,%0\n\t"		\				     "movec %0,%%cacr"		\				     : "=&d" (_tmp)		\				     : "di" (FLUSH_I_AND_D));	\	}							\})#define flush_cache_all() __flush_cache_all()extern inline void flush_cache_mm(struct mm_struct *mm){	if (mm == current->mm)		__flush_cache_030();}extern inline void flush_cache_range(struct mm_struct *mm,				     unsigned long start,				     unsigned long end){	if (mm == current->mm)	        __flush_cache_030();}extern inline void flush_cache_page(struct vm_area_struct *vma,				    unsigned long vmaddr){	if (vma->vm_mm == current->mm)	        __flush_cache_030();}/* Push the page at kernel virtual address and clear the icache *//* RZ: use cpush %bc instead of cpush %dc, cinv %ic */#define flush_page_to_ram(page) __flush_page_to_ram((unsigned long) page_address(page))extern inline void __flush_page_to_ram(unsigned long address){	if (CPU_IS_040_OR_060) {		__asm__ __volatile__("nop\n\t"				     ".chip 68040\n\t"				     "cpushp %%bc,(%0)\n\t"				     ".chip 68k"				     : : "a" (__pa((void *)address)));	} else {		unsigned long _tmp;		__asm__ __volatile__("movec %%cacr,%0\n\t"				     "orw %1,%0\n\t"				     "movec %0,%%cacr"				     : "=&d" (_tmp)				     : "di" (FLUSH_I));	}}#define flush_dcache_page(page)			do { } while (0)#define flush_icache_page(vma,pg)              do { } while (0)/* Push n pages at kernel virtual address and clear the icache *//* RZ: use cpush %bc instead of cpush %dc, cinv %ic */extern inline void flush_icache_range (unsigned long address,				       unsigned long endaddr){	if (CPU_IS_040_OR_060) {		short n = (endaddr - address + PAGE_SIZE - 1) / PAGE_SIZE;		while (--n >= 0) {			__asm__ __volatile__("nop\n\t"					     ".chip 68040\n\t"					     "cpushp %%bc,(%0)\n\t"					     ".chip 68k"					     : : "a" (virt_to_phys((void *)address)));			address += PAGE_SIZE;		}	} else {		unsigned long tmp;		__asm__ __volatile__("movec %%cacr,%0\n\t"				     "orw %1,%0\n\t"				     "movec %0,%%cacr"				     : "=&d" (tmp)				     : "di" (FLUSH_I));	}}#ifdef CONFIG_SUN3#include <asm/sun3_pgalloc.h>#else#include <asm/motorola_pgalloc.h>#endif#endif /* M68K_PGALLOC_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -