📄 axisflashmap.h
字号:
#ifndef __ASM_AXISFLASHMAP_H#define __ASM_AXISFLASHMAP_H/* Bootblock parameters are stored at 0xc000 and has the FLASH_BOOT_MAGIC * as start, it ends with 0xFFFFFFFF */#define FLASH_BOOT_MAGIC 0xbeefcace#define BOOTPARAM_OFFSET 0xc000/* apps/bootblocktool is used to read and write the parameters, * and it has nothing to do with the partition table. *//* the partitiontable consists of some "jump over" code, a head and * then the actual entries. * tools/mkptable is used to generate the ptable. *//* The partition table starts with code to "jump over" it. The ba instruction and delay-slot is modified elsewhere (for example the mkptable script); don't change this to fill the delay-slot. */#define PARTITIONTABLE_CODE_START { \ 0x0f, 0x05, /* nop 0 */\ 0x25, 0xf0, /* di 2 */\ 0xed, 0xff /* ba 4 */ }/* The actual offset depend on the number of entries */#define PARTITIONTABLE_CODE_END { \ 0x00, 0x00, /* ba offset 6 */\ 0x0f, 0x05 /* nop 8 */}#define PARTITION_TABLE_OFFSET 10#define PARTITION_TABLE_MAGIC 0xbeef /* Not a good magic *//* The partitiontable_head is located at offset +10: */struct partitiontable_head { __u16 magic; /* PARTITION_TABLE_MAGIC */ __u16 size; /* Length of ptable block (not header) */ __u32 checksum; /* simple longword sum */};/* And followed by partition table entries */struct partitiontable_entry { __u32 offset; /* Offset is relative to the sector the ptable is in */ __u32 size; __u32 checksum; /* simple longword sum */ __u16 type; __u16 flags; /* bit 0: ro/rw = 1/0 */ __u32 future0; /* 16 bytes reserved for future use */ __u32 future1; __u32 future2; __u32 future3;};/* ended by an end marker: */#define PARTITIONTABLE_END_MARKER 0xFFFFFFFF#define PARTITIONTABLE_END_MARKER_SIZE 4/*#define PARTITION_TYPE_RESCUE 0x0000?*/ /* Not used, maybe it should? */#define PARTITION_TYPE_PARAM 0x0001#define PARTITION_TYPE_KERNEL 0x0002#define PARTITION_TYPE_JFFS 0x0003#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -