config.in

嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使

#
# For a description of the syntax of this configuration file,
# see the Configure script.
#

mainmenu_name "Linux Kernel Configuration"

define_bool CONFIG_PARISC y
define_bool CONFIG_UID16 n
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
define_bool CONFIG_GENERIC_ISA_DMA y

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'General options'

# bool 'Symmetric multi-processing support' CONFIG_SMP
define_bool CONFIG_SMP n

bool 'Kernel Debugger support' CONFIG_KWDB
# define_bool CONFIG_KWDB n

# bool 'GSC/Gecko bus support' CONFIG_GSC y
define_bool CONFIG_GSC y

bool 'U2/Uturn I/O MMU' CONFIG_IOMMU_CCIO y
bool 'LASI I/O support' CONFIG_GSC_LASI y

bool 'PCI bus support' CONFIG_PCI y

if [ "$CONFIG_PCI" = "y" ]; then
	bool 'GSCtoPCI/DINO PCI support' CONFIG_GSC_DINO y
	bool 'LBA/Elroy PCI support' CONFIG_PCI_LBA n
fi 

if [ "$CONFIG_PCI_LBA" = "y" ]; then
	define_bool CONFIG_IOSAPIC y
	define_bool CONFIG_IOMMU_SBA y
fi

#
# if [ "$CONFIG_PCI_EPIC" = "y" ]; then...
#

endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
  bool 'Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

bool 'Networking support' CONFIG_NET

bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
tristate 'Kernel support for SOM binaries' CONFIG_BINFMT_SOM
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
fi

endmenu

##source drivers/parport/Config.in
mainmenu_option next_comment
comment 'Parallel port support'

tristate 'Parallel port support' CONFIG_PARPORT
if [ "$CONFIG_PARPORT" != "n" ]; then
   if [ "$CONFIG_PCI" = "y" ]; then
     dep_tristate '  PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
     if [ "$CONFIG_PARPORT_PC" != "n" ]; then
        bool '    Use FIFO/DMA if available' CONFIG_PARPORT_PC_FIFO
        if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
           bool '    SuperIO chipset support (EXPERIMENTAL)' CONFIG_PARPORT_PC_SUPERIO
        fi
     fi
   fi
   if [ "$CONFIG_GSC_LASI" = "y" ]; then
      dep_tristate '  LASI/ASP builtin parallel-port' CONFIG_PARPORT_GSC $CONFIG_PARPORT
   else
      define_tristate CONFIG_PARPORT_GSC n
   fi

   # If exactly one hardware type is selected then parport will optimise away
   # support for loading any others.  Defeat this if the user is keen.
   bool '  Support foreign hardware' CONFIG_PARPORT_OTHER

   bool '  IEEE 1284 transfer modes' CONFIG_PARPORT_1284
fi
endmenu


source drivers/block/Config.in

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
  comment 'SCSI support type (disk, tape, CDrom)'

  dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
  if [ "$CONFIG_BLK_DEV_SD" != "n" ]; then
    int  'Maximum number of SCSI disks that can be loaded as modules' CONFIG_SD_EXTRA_DEVS 40
  fi

  dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
  dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
  if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
    bool '  Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
    int  'Maximum number of CDROM devices that can be loaded as modules' CONFIG_SR_EXTRA_DEVS 2
  fi
  dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI

  comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
  bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
  bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS

  mainmenu_option next_comment
  comment 'SCSI low-level drivers'
  if [ "$CONFIG_GSC_LASI" = "y" ]; then
    dep_tristate 'Lasi SCSI support' CONFIG_SCSI_LASI $CONFIG_SCSI
    dep_tristate 'Zalon SCSI support' CONFIG_SCSI_ZALON $CONFIG_SCSI
  fi
  if [ "$CONFIG_PCI" = "y" ]; then
    dep_tristate 'SYM53C8XX SCSI support' CONFIG_SCSI_SYM53C8XX $CONFIG_SCSI
  fi
  if [ "$CONFIG_SCSI_ZALON" != "n" -o "$CONFIG_SCSI_SYM53C8XX" != "n" ]; then
    int  '  default tagged command queue depth' CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS 8
    int  '  maximum number of queued commands' CONFIG_SCSI_NCR53C8XX_MAX_TAGS 32
    int  '  synchronous transfers frequency in MHz' CONFIG_SCSI_NCR53C8XX_SYNC 20
    bool '  enable profiling' CONFIG_SCSI_NCR53C8XX_PROFILE
    bool '  use normal IO' CONFIG_SCSI_NCR53C8XX_IOMAPPED
  fi
  endmenu
fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'

  bool 'Network device support' CONFIG_NETDEVICES

  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    if [ "$CONFIG_GSC_LASI" = "y" ]; then
      tristate 'Lasi ethernet' CONFIG_LASI_82596
    fi
    source drivers/net/Config.in
  fi
  endmenu
fi

source drivers/char/Config.in

source fs/Config.in

mainmenu_option next_comment
comment 'Sound Drivers'
tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
   source drivers/sound/Config.in
fi
endmenu

if [ "$CONFIG_VT" = "y" ]; then
  mainmenu_option next_comment
  comment 'Console drivers'
  source drivers/video/Config.in

#  bool 'IODC console' CONFIG_IODC_CONSOLE
  bool 'STI console' CONFIG_STI_CONSOLE
  if [ "$CONFIG_IODC_CONSOLE" = "n" ]; then
    if [ "$CONFIG_GSC_PS2" = "y" ]; then
      define_bool CONFIG_DUMMY_CONSOLE y
    fi
  fi
  if [ "$CONFIG_STI_CONSOLE" = "y" ]; then
    define_bool CONFIG_DUMMY_CONSOLE y
  fi
  endmenu
fi
# endmenu

mainmenu_option next_comment
comment 'Kernel hacking'

#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
endmenu