config.in

嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使

      bool 'Sun3x ESP SCSI' CONFIG_SUN3X_ESP
   fi

   endmenu

fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then

   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      #
      # Network device configuration
      #
      tristate '  Dummy net driver support' CONFIG_DUMMY
      tristate '  SLIP (serial line) support' CONFIG_SLIP
      if [ "$CONFIG_SLIP" != "n" ]; then
	 bool '    CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
	 bool '    Keepalive and linefill' CONFIG_SLIP_SMART
	 bool '    Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
      fi
      tristate '  PPP (point-to-point) support' CONFIG_PPP
      if [ ! "$CONFIG_PPP" = "n" ]; then
	 comment 'CCP compressors for PPP are only built as modules.'
      fi
      tristate '  EQL (serial line load balancing) support' CONFIG_EQUALIZER
      if [ "$CONFIG_ZORRO" = "y" ]; then
	 tristate '  Ariadne support' CONFIG_ARIADNE
	 tristate '  Ariadne II support' CONFIG_ARIADNE2
	 tristate '  A2065 support' CONFIG_A2065
	 tristate '  Hydra support' CONFIG_HYDRA
      fi
      if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
	 tristate '  PCMCIA NE2000 support' CONFIG_APNE
      fi
      if [ "$CONFIG_APOLLO" = "y" ]; then
	 tristate '  Apollo 3c505 support' CONFIG_APOLLO_ELPLUS
      fi
      if [ "$CONFIG_MAC" = "y" ]; then
	 bool '  Macintosh NS 8390 based ethernet cards' CONFIG_MAC8390
	 tristate '  Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)' CONFIG_MACSONIC
	 tristate '  Macintosh SMC 9194 based ethernet cards' CONFIG_SMC9194
	 tristate '  Macintosh CS89x0 based ethernet cards' CONFIG_MAC89x0
	 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
		bool '  Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)' CONFIG_MACMACE
	 fi
      fi
      if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
	 tristate '  MVME147 (Lance) Ethernet support' CONFIG_MVME147_NET
      fi
      if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
	 tristate '  MVME16x Ethernet support' CONFIG_MVME16x_NET
      fi
      if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
	 tristate '  BVME6000 Ethernet support' CONFIG_BVME6000_NET
      fi
      if [ "$CONFIG_ATARI" = "y" ]; then
	 tristate '  Atari Lance support' CONFIG_ATARILANCE
	 if [ "$CONFIG_ATARI_ACSI" != "n" ]; then
	    tristate '  BioNet-100 support' CONFIG_ATARI_BIONET
	    tristate '  PAMsNet support' CONFIG_ATARI_PAMSNET
	 fi
      fi
      if [ "$CONFIG_SUN3" = "y" -o "$CONFIG_SUN3X" = "y" ]; then
	tristate '  Sun3/Sun3x on-board LANCE support' CONFIG_SUN3LANCE
      fi
      if [ "$CONFIG_SUN3" = "y" ]; then
	tristate '  Sun3 on-board Intel 82586 support' CONFIG_SUN3_82586
      fi
      if [ "$CONFIG_HP300" = "y" ]; then
	 bool '  HP on-board LANCE support' CONFIG_HPLANCE
      fi
      if [ "$CONFIG_Q40" = "y" ]; then
         if [  "$CONFIG_PARPORT" != "n" ]; then
	    dep_tristate '  PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT
	 fi
         tristate 'NE2000/NE1000 support' CONFIG_NE2000
      fi
   fi
   endmenu

fi

mainmenu_option next_comment
comment 'Character devices'
 
if [ "$CONFIG_Q40" = "y" ]; then
   tristate 'Q40 Standard/generic serial support' CONFIG_SERIAL
fi

if [ "$CONFIG_SERIAL" = "y" ]; then
   bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE
   bool '  Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED
fi

if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
   bool '    Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
   bool '    Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
   bool '    Support special multiport boards' CONFIG_SERIAL_MULTIPORT
   bool '    Support the Bell Technologies HUB6 card' CONFIG_HUB6
fi

if [ "$CONFIG_VME" = "n" ]; then
   define_bool CONFIG_VT y
   if [ "$CONFIG_VT" = "y" ]; then
      bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
   fi
fi

if [ "$CONFIG_ATARI" = "y" ]; then
   define_bool CONFIG_NVRAM y
fi

if [ "$CONFIG_AMIGA" = "y" ]; then
   tristate 'Amiga mouse support' CONFIG_AMIGAMOUSE
   if [ "$CONFIG_AMIGAMOUSE" != "n" ]; then
      define_bool CONFIG_BUSMOUSE y
   fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
   tristate 'Atari mouse support' CONFIG_ATARIMOUSE
   if [ "$CONFIG_ATARIMOUSE" != "n" ]; then
      define_bool CONFIG_BUSMOUSE y
   fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
   tristate 'Atari MFP serial support' CONFIG_ATARI_MFPSER
   tristate 'Atari SCC serial support' CONFIG_ATARI_SCC
   if [ "$CONFIG_ATARI_SCC" = "y" -o "$CONFIG_ATARI_SCC" = "m" ]; then
      bool '  Atari SCC serial DMA support' CONFIG_ATARI_SCC_DMA
   fi
   tristate 'Atari MIDI serial support' CONFIG_ATARI_MIDI
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'Atari DSP56k support (EXPERIMENTAL)' CONFIG_ATARI_DSP56K
   fi
fi
if [ "$CONFIG_AMIGA" = "y" ]; then
   tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL
   if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
      tristate 'Hisoft Whippet PCMCIA serial support' CONFIG_WHIPPET_SERIAL
   fi
fi
if [ "$CONFIG_PARPORT" = "n" ]; then
   if [ "$CONFIG_ZORRO" = "y" ]; then
      tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT
      dep_tristate '  GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT
      dep_tristate '  GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT
      tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
        tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
      fi
   fi
fi
if [ "$CONFIG_MAC" = "y" ]; then
   tristate 'Macintosh serial support' CONFIG_MAC_SCC
   bool 'Apple Desktop Bus (ADB) support' CONFIG_ADB
   if [ "$CONFIG_ADB" = "y" ]; then
      bool '   Include Mac II ADB driver' CONFIG_ADB_MACII
      bool '   Include Mac IIsi ADB driver' CONFIG_ADB_MACIISI
      bool '   Include CUDA ADB driver' CONFIG_ADB_CUDA
      bool '   Include IOP (IIfx/Quadra 9x0) ADB driver' CONFIG_ADB_IOP
      bool '   Include PMU (Powerbook) ADB driver' CONFIG_ADB_PMU68K
   fi
   dep_bool '   Use input layer for ADB devices' CONFIG_INPUT_ADBHID $CONFIG_INPUT
   if [ "$CONFIG_INPUT_ADBHID" = "y" ]; then
      define_bool CONFIG_MAC_HID y
      bool '     Support for ADB raw keycodes' CONFIG_MAC_ADBKEYCODES
      bool '     Support for mouse button 2+3 emulation' CONFIG_MAC_EMUMOUSEBTN
   else
      bool '   Support for ADB keyboard (old driver)' CONFIG_ADB_KEYBOARD
   fi
fi
if [ "$CONFIG_HP300" = "y" -a "$CONFIG_DIO" = "y" ]; then
   tristate 'HP DCA serial support' CONFIG_HPDCA
fi

if [ "$CONFIG_SUN3" = "y" -o "$CONFIG_SUN3X" = "y" ]; then
   bool 'Sun3/3x builtin serial support' CONFIG_SUN3X_ZS
else
   define_bool CONFIG_SUN3X_ZS n
fi
if [ "$CONFIG_SUN3X_ZS" = "y" ]; then
   define_bool CONFIG_SUN_KEYBOARD y
   define_bool CONFIG_SUN_MOUSE y
   define_bool CONFIG_BUSMOUSE y
   define_bool CONFIG_SBUS y
   define_bool CONFIG_SBUSCHAR y
   define_bool CONFIG_SUN_SERIAL y
else
   define_bool CONFIG_SUN_KEYBOARD n
   define_bool CONFIG_SUN_MOUSE n
   define_bool CONFIG_SBUS n
fi

if [ "$CONFIG_AMIGA" = "y" -o "$CONFIG_ATARI" = "y" -o \
     "$CONFIG_MAC" = "y" -o "$CONFIG_HP300" = "y" -o \
     "$CONFIG_SUN3" = "y" -o "$CONFIG_SUN3X" = "y" ]; then
   if [ "$CONFIG_ATARI_MFPSER" = "y" -o "$CONFIG_ATARI_SCC" = "y" -o \
        "$CONFIG_ATARI_MIDI" = "y" -o "$CONFIG_MAC_SCC" = "y" -o \
        "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o \
        "$CONFIG_GVPIOEXT" = "y" -o "$CONFIG_MULTIFACE_III_TTY" = "y" -o \
        "$CONFIG_HPDCA" = "y" -o "$CONFIG_SUN3X_ZS" = "y" ]; then
      bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
   fi
fi
if [ "$CONFIG_VME" = "y" ]; then
   define_bool CONFIG_SERIAL_CONSOLE y
   if [ "$CONFIG_MVME147" = "y" ]; then
      bool 'SCC support for MVME147 serial ports' CONFIG_MVME147_SCC
   fi
   if [ "$CONFIG_MVME16x" = "y" ]; then
      bool 'CD2401 support for MVME166/7 serial ports' CONFIG_SERIAL167
      bool 'SCC support for MVME162 serial ports' CONFIG_MVME162_SCC
   fi
   if [ "$CONFIG_BVME6000" = "y" ]; then
      bool 'SCC support for BVME6000 serial ports' CONFIG_BVME6000_SCC
   fi
fi
if [ "$CONFIG_APOLLO" = "y" ]; then
   bool 'Support for DN serial port (dummy)' CONFIG_DN_SERIAL
   bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE

   define_tristate CONFIG_SERIAL $CONFIG_DN_SERIAL
fi 
bool 'Support for user serial device modules' CONFIG_USERIAL
bool 'Watchdog Timer Support'	CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
   bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
   bool '  Software Watchdog' CONFIG_SOFT_WATCHDOG
fi
if [ "$CONFIG_ATARI" = "y" ]; then
   bool 'Enhanced Real Time Clock Support' CONFIG_RTC
else
   if [ "$CONFIG_SUN3" = "y" ]; then
      define_bool CONFIG_GEN_RTC y
   else
      bool 'Generic /dev/rtc emulation' CONFIG_GEN_RTC
   fi
fi
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
   int '  Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi

endmenu

mainmenu_option next_comment
comment 'Sound support'

tristate 'Sound support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
   source drivers/sound/dmasound/Config.in
fi
endmenu

source fs/Config.in

if [ "$CONFIG_VME" = "n" ]; then
   mainmenu_option next_comment
   comment 'Console drivers'
   source drivers/video/Config.in
   endmenu
fi

mainmenu_option next_comment
comment 'Kernel hacking'

#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
endmenu