config.in

嵌入式系统设计与实例开发实验教材二源码 多线程应用程序设计 串行端口程序设计 AD接口实验 CAN总线通信实验 GPS通信实验 Linux内核移植与编译实验 IC卡读写实验 SD驱动使

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
mainmenu_name "Linux Kernel Configuration"

define_bool CONFIG_ARM y
define_bool CONFIG_EISA n
define_bool CONFIG_SBUS n
define_bool CONFIG_MCA n
define_bool CONFIG_UID16 y
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
define_bool CONFIG_GENERIC_BUST_SPINLOCK n
define_bool CONFIG_GENERIC_ISA_DMA n

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
bool 'Prompt for obsolete code/drivers' CONFIG_OBSOLETE
endmenu


mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
dep_bool '  Set version information on all module symbols' CONFIG_MODVERSIONS $CONFIG_MODULES
dep_bool '  Kernel module loader' CONFIG_KMOD $CONFIG_MODULES
endmenu


mainmenu_option next_comment
comment 'System Type'

choice 'ARM system type' \
	"Anakin			CONFIG_ARCH_ANAKIN \
	 Archimedes/A5000	CONFIG_ARCH_ARCA5K \
	 Cirrus-CL-PS7500FE     CONFIG_ARCH_CLPS7500 \
 	 CLPS711x/EP721x-based	CONFIG_ARCH_CLPS711X \
	 Co-EBSA285		CONFIG_ARCH_CO285 \
	 PXA250/210-based	CONFIG_ARCH_PXA \
	 EBSA-110		CONFIG_ARCH_EBSA110 \
 	 Epxa10db               CONFIG_ARCH_CAMELOT \
	 FootBridge		CONFIG_ARCH_FOOTBRIDGE \
	 Integrator		CONFIG_ARCH_INTEGRATOR \
	 LinkUp-L7200		CONFIG_ARCH_L7200 \
	 Motorola-MX1ADS        CONFIG_ARCH_MX1ADS \
	 RiscPC			CONFIG_ARCH_RPC \
 	 SA1100-based		CONFIG_ARCH_SA1100 \
	 S3C2400-based          CONFIG_ARCH_S3C2400 \
	 S3C2410-based          CONFIG_ARCH_S3C2410 \
	 Shark			CONFIG_ARCH_SHARK" RiscPC

if [ "$CONFIG_ARCH_ARCA5K" = "y" ]; then
comment 'Archimedes/A5000 Implementations'
# These architectures will be combined.  However, until this
# is complete...  Note that the ARC will take precedence over
# A5K
comment 'Archimedes/A5000 Implementations (select only ONE)'
dep_bool '  Archimedes' CONFIG_ARCH_ARC $CONFIG_ARCH_ARCA5K
dep_bool '  A5000' CONFIG_ARCH_A5K $CONFIG_ARCH_ARCA5K
fi	# /* CONFIG_ARCH_ARCA5K */

if [ "$CONFIG_ARCH_FOOTBRIDGE" = "y" ]; then
comment 'Footbridge Implementations'
dep_bool '  CATS' CONFIG_ARCH_CATS $CONFIG_ARCH_FOOTBRIDGE
dep_bool '  Compaq Personal Server' CONFIG_ARCH_PERSONAL_SERVER $CONFIG_ARCH_FOOTBRIDGE
dep_bool '  EBSA285 (addin mode)' CONFIG_ARCH_EBSA285_ADDIN $CONFIG_ARCH_FOOTBRIDGE
dep_bool '  EBSA285 (host mode)' CONFIG_ARCH_EBSA285_HOST $CONFIG_ARCH_FOOTBRIDGE
dep_bool '  NetWinder' CONFIG_ARCH_NETWINDER $CONFIG_ARCH_FOOTBRIDGE
fi	# /* CONFIG_ARCH_FOOTBRIDGE */

if [ "$CONFIG_ARCH_SA1100" = "y" ]; then
mainmenu_option next_comment
comment 'SA11x0 Implementations'
dep_bool '  Assabet' CONFIG_SA1100_ASSABET $CONFIG_ARCH_SA1100
dep_bool '    Include support for Neponset' CONFIG_ASSABET_NEPONSET $CONFIG_SA1100_ASSABET
dep_bool '  G200' CONFIG_SA1100_G200 $CONFIG_ARCH_SA1100
dep_bool '  ADS Bitsy' CONFIG_SA1100_ADSBITSY $CONFIG_ARCH_SA1100
dep_bool '  Brutus' CONFIG_SA1100_BRUTUS $CONFIG_ARCH_SA1100
dep_bool '  CerfBoard' CONFIG_SA1100_CERF $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_CERF" = "y" ]; then
   choice 'Cerf RAM available' \
        "8MB   CONFIG_SA1100_CERF_8MB \
         16MB   CONFIG_SA1100_CERF_16MB \
         32MB   CONFIG_SA1100_CERF_32MB \
         64MB   CONFIG_SA1100_CERF_64MB" CerfRam
   choice 'Cerf Flash available'  \
        "8MB    CONFIG_SA1100_CERF_FLASH_8MB \
         16MB   CONFIG_SA1100_CERF_FLASH_16MB \
         32MB   CONFIG_SA1100_CERF_FLASH_32MB" CerfFlash
   bool 'Cerf w/CPLD support (CerfPDA)' CONFIG_SA1100_CERF_CPLD
fi
dep_bool '  Compaq iPAQ H3100' CONFIG_SA1100_H3100 $CONFIG_ARCH_SA1100
dep_bool '  Compaq iPAQ H3600/H3700' CONFIG_SA1100_H3600 $CONFIG_ARCH_SA1100
dep_bool '  Compaq iPAQ H3800' CONFIG_SA1100_H3800 $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_H3100" = "y" -o "$CONFIG_SA1100_H3600" = "y" -o "$CONFIG_SA1100_H3800" = "y" ]; then
  define_bool CONFIG_SA1100_H3XXX y
else
  define_bool CONFIG_SA1100_H3XXX n
fi
#dep_bool '  Consus' CONFIG_SA1100_CONSUS $CONFIG_ARCH_SA1100
#dep_bool '  Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
dep_bool '  Extenex HandHeld Theater (Squashtail)' CONFIG_SA1100_EXTENEX1 $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_EXTENEX1" = "y" ]; then
   bool '    Support 16 MB of DRAM (not just 8)' CONFIG_SA1100_EXTENEX1_16MB
fi
dep_bool '  FlexaNet' CONFIG_SA1100_FLEXANET $CONFIG_ARCH_SA1100
dep_bool '  FreeBird-v1.1' CONFIG_SA1100_FREEBIRD $CONFIG_ARCH_SA1100
dep_bool '  Frodo' CONFIG_SA1100_FRODO $CONFIG_ARCH_SA1100
dep_bool '  GraphicsClient Plus' CONFIG_SA1100_GRAPHICSCLIENT $CONFIG_ARCH_SA1100
dep_bool '  GraphicsMaster' CONFIG_SA1100_GRAPHICSMASTER $CONFIG_ARCH_SA1100
dep_bool '  HP Labs BadgePAD 4' CONFIG_SA1100_BADGE4 $CONFIG_ARCH_SA1100
dep_bool '  HP Jornada 720' CONFIG_SA1100_JORNADA720 $CONFIG_ARCH_SA1100
dep_bool '  HuW WebPanel' CONFIG_SA1100_HUW_WEBPANEL $CONFIG_ARCH_SA1100
dep_bool '  Itsy' CONFIG_SA1100_ITSY $CONFIG_ARCH_SA1100
dep_bool '  LART' CONFIG_SA1100_LART $CONFIG_ARCH_SA1100
dep_bool '  nanoEngine' CONFIG_SA1100_NANOENGINE $CONFIG_ARCH_SA1100
dep_bool '  OmniMeter' CONFIG_SA1100_OMNIMETER $CONFIG_ARCH_SA1100
dep_bool '  Pangolin' CONFIG_SA1100_PANGOLIN $CONFIG_ARCH_SA1100
dep_bool '  PLEB' CONFIG_SA1100_PLEB $CONFIG_ARCH_SA1100
dep_bool '  PT System 3' CONFIG_SA1100_PT_SYSTEM3 $CONFIG_ARCH_SA1100
dep_bool '  Shannon' CONFIG_SA1100_SHANNON $CONFIG_ARCH_SA1100
dep_bool '  Sherman' CONFIG_SA1100_SHERMAN $CONFIG_ARCH_SA1100
dep_bool '  Simpad' CONFIG_SA1100_SIMPAD $CONFIG_ARCH_SA1100
dep_bool '  Tulsa' CONFIG_SA1100_PFS168 $CONFIG_ARCH_SA1100
dep_bool '  Victor' CONFIG_SA1100_VICTOR $CONFIG_ARCH_SA1100
dep_bool '  XP860' CONFIG_SA1100_XP860 $CONFIG_ARCH_SA1100
dep_bool '  Yopy' CONFIG_SA1100_YOPY $CONFIG_ARCH_SA1100
dep_bool '  Kings(eZEX)' CONFIG_SA1100_KINGS $CONFIG_ARCH_SA1100
dep_bool '  Forte(FOVISION)' CONFIG_SA1100_FORTE $CONFIG_ARCH_SA1100
dep_bool '  Suns(Commuworks)' CONFIG_SA1100_SUNS_OLD $CONFIG_ARCH_SA1100
dep_bool '  Suns(Ezex)' CONFIG_SA1100_SUNS $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_SUNS" = "y" ]; then
   bool '     Supports SUNS REV0.2' CONFIG_SUNS_REV02
fi
dep_bool '  GSL Gill' CONFIG_SA1100_GILL $CONFIG_ARCH_SA1100
dep_bool '  EXILIEN102' CONFIG_SA1100_ALPHA2 $CONFIG_ARCH_SA1100
dep_bool '  Wismo(GigaSysNet)' CONFIG_SA1100_WISMO $CONFIG_ARCH_SA1100

# Determine if SA1111 support is required
if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \
     "$CONFIG_SA1100_CONSUS" = "y" -o \
     "$CONFIG_SA1100_JORNADA720" = "y" -o \
     "$CONFIG_SA1100_PFS168" = "y" -o \
     "$CONFIG_SA1100_XP860" = "y" -o \
     "$CONFIG_SA1100_GRAPHICSMASTER" = "y" -o \
     "$CONFIG_SA1100_PT_SYSTEM3" = "y" -o \
     "$CONFIG_SA1100_ADSBITSY" = "y" -o \
     "$CONFIG_SA1100_BADGE4" = "y" ]; then
   define_bool CONFIG_SA1111 y
   define_int CONFIG_FORCE_MAX_ZONEORDER 9
else
   define_bool CONFIG_SA1111 n
fi

dep_tristate 'SA1100 USB function support' CONFIG_SA1100_USB $CONFIG_ARCH_SA1100
dep_tristate '  Support for SA11x0 USB network link function' CONFIG_SA1100_USB_NETLINK $CONFIG_SA1100_USB
dep_tristate '  Support for SA11x0 USB character device emulation' CONFIG_SA1100_USB_CHAR $CONFIG_SA1100_USB

dep_tristate 'Compaq iPAQ Handheld sleeve support' CONFIG_H3600_SLEEVE $CONFIG_SA1100_H3600
endmenu
fi	# /* CONFIG_ARCH_SA1100 */

if [ "$CONFIG_ARCH_PXA" = "y" ]; then
mainmenu_option next_comment
comment 'Intel PXA250/210 Implementations'
dep_bool '  Intel DBPXA250 Development Platform' CONFIG_ARCH_LUBBOCK $CONFIG_ARCH_PXA
dep_bool '    some Changes for Linuette' CONFIG_LUBBOCK_MIZI $CONFIG_ARCH_LUBBOCK
dep_bool '  Accelent Xscale IDP' CONFIG_ARCH_PXA_IDP $CONFIG_ARCH_PXA
dep_bool '  Intrinsyc CerfBoard' CONFIG_ARCH_PXA_CERF $CONFIG_ARCH_PXA
dep_bool '  SAMSUNG premium' CONFIG_ARCH_PREMIUM $CONFIG_ARCH_PXA
dep_bool '  NIPC2 - SDK' CONFIG_ARCH_NIPC2 $CONFIG_ARCH_PXA

if [ "$CONFIG_ARCH_PXA_CERF" = "y" ]; then
   define_bool CONFIG_PXA_CERF y

   choice 'CerfBoard Style' \
      "PDA   CONFIG_PXA_CERF_PDA \
       BOARD CONFIG_PXA_CERF_BOARD" PDA

   choice 'CerfBoard RAM Available' \
      "128MB  CONFIG_PXA_CERF_RAM_128MB \
        64MB  CONFIG_PXA_CERF_RAM_64MB \
        32MB  CONFIG_PXA_CERF_RAM_32MB \
        16MB  CONFIG_PXA_CERF_RAM_16MB" 64MB

   choice 'CerfBoard Flash Available' \
      "64MB  CONFIG_PXA_CERF_FLASH_64MB \
       32MB  CONFIG_PXA_CERF_FLASH_32MB \
       16MB  CONFIG_PXA_CERF_FLASH_16MB \
        8MB  CONFIG_PXA_CERF_FLASH_8MB" 32MB
fi

if [ "$CONFIG_ARCH_LUBBOCK" = "y" ]; then
   define_bool CONFIG_SA1111 y
fi

dep_tristate 'PXA USB function support' CONFIG_PXA_USB $CONFIG_ARCH_PXA
dep_tristate '  Support for PXA USB network link function' CONFIG_PXA_USB_NETLINK $CONFIG_PXA_USB
dep_tristate '  Support for PXA USB character device emulation' CONFIG_PXA_USB_CHAR $CONFIG_PXA_USB
endmenu
else	# /* CONFIG_ARCH_PXA */
  define_bool CONFIG_ARCH_LUBBOCK n
  define_bool CONFIG_ARCH_PXA_IDP n
  define_bool CONFIG_ARCH_PXA_CERF n
  define_bool CONFIG_ARCH_PREMIUM n
  define_bool CONFIG_ARCH_NIPC2 n
fi	# /* CONFIG_ARCH_PXA */

if [ "$CONFIG_ARCH_CLPS711X" = "y" ]; then
  comment 'CLPS711X/EP721X Implementations'
  dep_bool '  AUTCPU12' CONFIG_ARCH_AUTCPU12 $CONFIG_ARCH_CLPS711X
  dep_bool '  CDB89712' CONFIG_ARCH_CDB89712 $CONFIG_ARCH_CLPS711X
  dep_bool '  CLEP7312' CONFIG_ARCH_CLEP7312 $CONFIG_ARCH_CLPS711X
  dep_bool '  EDB7211' CONFIG_ARCH_EDB7211 $CONFIG_ARCH_CLPS711X
  dep_bool '  P720T' CONFIG_ARCH_P720T $CONFIG_ARCH_CLPS711X
  dep_bool '  FORTUNET' CONFIG_ARCH_FORTUNET $CONFIG_ARCH_CLPS711X

  # XXX Maybe these should indicate register compatibility
  # instead of being mutually exclusive.
  if [ "$CONFIG_ARCH_EDB7211" = "y" ]; then
     define_bool CONFIG_ARCH_EP7211 y
  else
     define_bool CONFIG_ARCH_EP7211 n
  fi
  if [ "$CONFIG_ARCH_P720T" = "y" ]; then
     define_bool CONFIG_ARCH_EP7212 y
  else
     define_bool CONFIG_ARCH_EP7212 n
  fi

  if [ "$CONFIG_ARCH_EP7211" = "y" -o \
       "$CONFIG_ARCH_EP7212" = "y" ]; then
     bool '  EP72xx ROM boot' CONFIG_EP72XX_ROM_BOOT
  fi
else	# /* CONFIG_ARCH_CLPS711X */
  define_bool CONFIG_ARCH_AUTCPU12 n
  define_bool CONFIG_ARCH_CDB89712 n
  define_bool CONFIG_ARCH_CLEP7312 n
  define_bool CONFIG_ARCH_EDB7211 n
  define_bool CONFIG_ARCH_P720T n
  define_bool CONFIG_ARCH_FORTUNET n
fi	# /* CONFIG_ARCH_CLPS711X */

if [ "$CONFIG_ARCH_S3C2400" = "y" ]; then
comment 'S3C2400 Implementation'
dep_bool ' GAMEPARK' CONFIG_S3C2400_GAMEPARK $CONFIG_ARCH_S3C2400
if [ "$CONFIG_S3C2400_GAMEPARK" = "y" ]; then
	bool '  GPI Revision 1 support' CONFIG_GAMEPARK_REV1
	bool '  GPI Revision 2 support' CONFIG_GAMEPARK_REV2
fi
dep_bool ' SMDK' CONFIG_S3C2400_SMDK $CONFIG_ARCH_S3C2400

dep_tristate 'S3C2400 USB function support' CONFIG_S3C2400_USB $CONFIG_ARCH_S3C2400
dep_tristate '  Support for S3C2400 USB character device emulation' CONFIG_S3C2400_USB_CHAR $CONFIG_S3C2400_USB
fi	# /* CONFIG_ARCH_S3C2400 */

if [ "$CONFIG_ARCH_S3C2410" = "y" ]; then
comment 'S3C2410 Implementation'
dep_bool ' SMDK (MERI TECH BOARD)' CONFIG_S3C2410_SMDK $CONFIG_ARCH_S3C2410
dep_bool '   change AIJI' CONFIG_SMDK_AIJI
dep_bool '   by threewater--1' CONFIG_SMDK_THREEWATER1
dep_tristate 'S3C2410 USB function support' CONFIG_S3C2410_USB $CONFIG_ARCH_S3C2100
dep_tristate '  Support for S3C2410 USB character device emulation' CONFIG_S3C2410_USB_CHAR $CONFIG_S3C2410_USB
fi	# /* CONFIG_ARCH_S3C2410 */

# Definitions to make life easier
if [ "$CONFIG_ARCH_ARCA5K" = "y" -o \
     "$CONFIG_ARCH_RPC" = "y" ]; then
   define_bool CONFIG_ARCH_ACORN y
else
   define_bool CONFIG_ARCH_ACORN n
fi

# see Documentation/arm/ConfigVars for a description of these
if [ "$CONFIG_ARCH_CO285" = "y" -o \
     "$CONFIG_ARCH_FOOTBRIDGE" = "y" ]; then
   define_bool CONFIG_FOOTBRIDGE y
else
   define_bool CONFIG_FOOTBRIDGE n
fi
if [ "$CONFIG_ARCH_CATS" = "y" -o \
     "$CONFIG_ARCH_EBSA285_HOST" = "y" -o \
     "$CONFIG_ARCH_NETWINDER" = "y" -o \
     "$CONFIG_ARCH_PERSONAL_SERVER" = "y" ]; then
   define_bool CONFIG_FOOTBRIDGE_HOST y
else
   define_bool CONFIG_FOOTBRIDGE_HOST n
fi
if [ "$CONFIG_ARCH_CO285" = "y" -o \
     "$CONFIG_ARCH_EBSA285_ADDIN" = "y" ]; then
   define_bool CONFIG_FOOTBRIDGE_ADDIN y
else
   define_bool CONFIG_FOOTBRIDGE_ADDIN n
fi
if [ "$CONFIG_ARCH_EBSA285_HOST" = "y" -o \
     "$CONFIG_ARCH_EBSA285_ADDIN" = "y" ]; then
   define_bool CONFIG_ARCH_EBSA285 y
fi

# Figure out whether this system uses 26-bit or 32-bit CPUs.
if [ "$CONFIG_ARCH_ARCA5K" = "y" ]; then
   define_bool CONFIG_CPU_32 n
   define_bool CONFIG_CPU_26 y
   bool '2MB physical memory' CONFIG_PAGESIZE_16
else
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_26 n
fi

comment 'Processor Type'

# Firstly, figure out what processor architecture version we should be using.
if [ "$CONFIG_ARCH_RPC"        = "y" -o "$CONFIG_ARCH_CLPS7500" = "y" ]; then
   define_bool CONFIG_CPU_32v3 y
else
   define_bool CONFIG_CPU_32v3 n
fi
if [ "$CONFIG_ARCH_EBSA110"    = "y" -o "$CONFIG_FOOTBRIDGE"    = "y" -o \
     "$CONFIG_ARCH_TBOX"       = "y" -o "$CONFIG_ARCH_SHARK"    = "y" -o \
     "$CONFIG_ARCH_NEXUSPCI"   = "y" -o "$CONFIG_ARCH_CLPS711X" = "y" -o \
     "$CONFIG_ARCH_INTEGRATOR" = "y" -o "$CONFIG_ARCH_SA1100"   = "y" -o \
     "$CONFIG_ARCH_L7200"      = "y" -o "$CONFIG_ARCH_ANAKIN"	= "y" -o \
     "$CONFIG_ARCH_S3C2400"    = "y" -o "$CONFIG_ARCH_S3C2410" = "y" -o \
     "$CONFIG_ARCH_CAMELOT"    = "y" -o "$CONFIG_ARCH_MX1ADS"   = "y" ]; then
   define_bool CONFIG_CPU_32v4 y
else
   define_bool CONFIG_CPU_32v4 n
fi

# Select CPU types depending on the architecture selected.
# We use this to select which CPUs are supported, and to select
# the compiler tuning options.

# ARM610
if [ "$CONFIG_ARCH_RPC" = "y" ]; then
   bool 'Support ARM610 processor' CONFIG_CPU_ARM610
else
   define_bool CONFIG_CPU_ARM610 n
fi

# ARM710
if [ "$CONFIG_ARCH_CLPS7500" = "y" ]; then
   define_bool CONFIG_CPU_ARM710 y
else
   if [ "$CONFIG_ARCH_RPC" = "y" ]; then
      bool 'Support ARM710 processor' CONFIG_CPU_ARM710
   else
      define_bool CONFIG_CPU_ARM710 n
   fi
fi

# ARM720T
if [ "$CONFIG_ARCH_CLPS711X" = "y" -o \
     "$CONFIG_ARCH_L7200"    = "y" -o \
     "$CONFIG_ARCH_CDB89712" = "y" ]; then
   define_bool CONFIG_CPU_ARM720T y
else
   if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
      bool 'Support ARM720T processor' CONFIG_CPU_ARM720T
   else
      define_bool CONFIG_CPU_ARM720T n
   fi
fi

# ARM920T
if [ "$CONFIG_ARCH_S3C2400" = "y" -o "$CONFIG_ARCH_S3C2410" = "y" -o \
     "$CONFIG_ARCH_MX1ADS" = "y" ]; then
   define_bool CONFIG_CPU_ARM920T y
else
   if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
      bool 'Support ARM920T processor' CONFIG_CPU_ARM920T
   else
      define_bool CONFIG_CPU_ARM920T n
   fi
fi


if [ "$CONFIG_CPU_ARM920T" = "y" ]; then
   bool '  ARM920T CPU idle' CONFIG_CPU_ARM920_CPU_IDLE
   bool '  ARM920T I-Cache on' CONFIG_CPU_ARM920_I_CACHE_ON
   bool '  ARM920T D-Cache on' CONFIG_CPU_ARM920_D_CACHE_ON
   if [ "$CONFIG_CPU_ARM920_D_CACHE_ON" = "y" ] ; then
      bool '  Force write through caches on ARM920T' CONFIG_CPU_ARM920_WRITETHROUGH
   fi
fi

# ARM922T
if [ "$CONFIG_ARCH_CAMELOT" = "y" ]; then
         define_bool CONFIG_CPU_ARM922T y
else
         define_bool CONFIG_CPU_ARM922T n
fi
if [ "$CONFIG_CPU_ARM922T" = "y" ]; then
   bool '  ARM922T CPU idle' CONFIG_CPU_ARM922_CPU_IDLE
   bool '  ARM922T I-Cache on' CONFIG_CPU_ARM922_I_CACHE_ON
   bool '  ARM922T D-Cache on' CONFIG_CPU_ARM922_D_CACHE_ON
   if [ "$CONFIG_CPU_ARM922_D_CACHE_ON" = "y" ] ; then
      bool '  Force write through caches on ARM922T' CONFIG_CPU_ARM922_WRITETHROUGH
   fi
fi

# ARM926T
if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   bool 'Support ARM926T processor' CONFIG_CPU_ARM926T
else
   define_bool CONFIG_CPU_ARM926T n
fi
if [ "$CONFIG_CPU_ARM926T" = "y" ]; then
   bool '  ARM926T CPU idle' CONFIG_CPU_ARM926_CPU_IDLE
   bool '  ARM926T I-Cache on' CONFIG_CPU_ARM926_I_CACHE_ON
   bool '  ARM926T D-Cache on' CONFIG_CPU_ARM926_D_CACHE_ON
   if [ "$CONFIG_CPU_ARM926_D_CACHE_ON" = "y" ] ; then
      bool '  Force write through caches on ARM926T' CONFIG_CPU_ARM926_WRITETHROUGH
   fi
   if [ "$CONFIG_CPU_ARM926_I_CACHE_ON" = "y" -o \
        "$CONFIG_CPU_ARM926_D_CACHE_ON" = "y" ]; then
      bool '  Round robin I and D cache replacement algorithm' CONFIG_CPU_ARM926_ROUND_ROBIN
   fi
fi