dsp2833x_defaultisr.c

DSP28335内部时钟中断跑马灯程序

}
// INT4.6
interrupt void ECAP6_INT_ISR(void)     // ECAP-6
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}
// INT4.7 - Reserved
// INT4.8 - Reserved

// -----------------------------------------------------------
// PIE Group 5 - MUXed into CPU INT5
// -----------------------------------------------------------

// INT 5.1
interrupt void EQEP1_INT_ISR(void)    // EQEP-1
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT5.2
interrupt void EQEP2_INT_ISR(void)    // EQEP-2
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;
 
  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT5.3 - Reserved
// INT5.4 - Reserved
// INT5.5 - Reserved
// INT5.6 - Reserved
// INT5.7 - Reserved
// INT5.8 - Reserved

// -----------------------------------------------------------
// PIE Group 6 - MUXed into CPU INT6
// -----------------------------------------------------------

// INT6.1
interrupt void SPIRXINTA_ISR(void)    // SPI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT6.2
interrupt void SPITXINTA_ISR(void)     // SPI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT6.3 
interrupt void MRINTB_ISR(void)     // McBSP-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT6.4
interrupt void MXINTB_ISR(void)     // McBSP-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT6.5
interrupt void MRINTA_ISR(void)     // McBSP-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT6.6
interrupt void MXINTA_ISR(void)     // McBSP-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT6.7 - Reserved
// INT6.8 - Reserved




// -----------------------------------------------------------
// PIE Group 7 - MUXed into CPU INT7
// -----------------------------------------------------------

// INT7.1
interrupt void DINTCH1_ISR(void)     // DMA
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP7;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT7.2
interrupt void DINTCH2_ISR(void)     // DMA
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP7;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT7.3
interrupt void DINTCH3_ISR(void)     // DMA
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP7;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT7.4
interrupt void DINTCH4_ISR(void)     // DMA
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP7;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT7.5
interrupt void DINTCH5_ISR(void)     // DMA
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP7;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT7.6
interrupt void DINTCH6_ISR(void)     // DMA
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP7;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT7.7 - Reserved
// INT7.8 - Reserved

// -----------------------------------------------------------
// PIE Group 8 - MUXed into CPU INT8
// -----------------------------------------------------------

// INT8.1
interrupt void I2CINT1A_ISR(void)     // I2C-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP8;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT8.2
interrupt void I2CINT2A_ISR(void)     // I2C-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP8;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);
}

// INT8.3 - Reserved
// INT8.4 - Reserved

// INT8.5
interrupt void SCIRXINTC_ISR(void)     // SCI-C
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP8;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT8.6
interrupt void SCITXINTC_ISR(void)     // SCI-C
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP8;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT8.7 - Reserved
// INT8.8 - Reserved


// -----------------------------------------------------------
// PIE Group 9 - MUXed into CPU INT9
// -----------------------------------------------------------

// INT9.1
interrupt void SCIRXINTA_ISR(void)     // SCI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.2
interrupt void SCITXINTA_ISR(void)     // SCI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}


// INT9.3
interrupt void SCIRXINTB_ISR(void)     // SCI-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.4
interrupt void SCITXINTB_ISR(void)     // SCI-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.5
interrupt void ECAN0INTA_ISR(void)  // eCAN-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.6
interrupt void ECAN1INTA_ISR(void)  // eCAN-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.7
interrupt void ECAN0INTB_ISR(void)  // eCAN-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT9.8
interrupt void ECAN1INTB_ISR(void)  // eCAN-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP9;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// -----------------------------------------------------------
// PIE Group 10 - MUXed into CPU INT10
// -----------------------------------------------------------

// INT10.1 - Reserved
// INT10.2 - Reserved
// INT10.3 - Reserved
// INT10.4 - Reserved
// INT10.5 - Reserved
// INT10.6 - Reserved
// INT10.7 - Reserved
// INT10.8 - Reserved


// -----------------------------------------------------------
// PIE Group 11 - MUXed into CPU INT11
// -----------------------------------------------------------

// INT11.1 - Reserved
// INT11.2 - Reserved
// INT11.3 - Reserved
// INT11.4 - Reserved
// INT11.5 - Reserved
// INT11.6 - Reserved
// INT11.7 - Reserved
// INT11.8 - Reserved

// -----------------------------------------------------------
// PIE Group 12 - MUXed into CPU INT12
// -----------------------------------------------------------

// INT12.1
interrupt void XINT3_ISR(void)  // External Interrupt
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP12;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT12.2
interrupt void XINT4_ISR(void)  // External Interrupt
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP12;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT12.3
interrupt void XINT5_ISR(void)  // External Interrupt
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP12;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}
// INT12.4
interrupt void XINT6_ISR(void)  // External Interrupt
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP12;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT12.5
interrupt void XINT7_ISR(void)  // External Interrupt
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP12;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

// INT12.6 - Reserved
// INT12.7
interrupt void LVF_ISR(void)  // Latched overflow
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP12;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}
// INT12.8
interrupt void LUF_ISR(void)  // Latched underflow
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP12;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
  asm ("      ESTOP0");
  for(;;);

}

//---------------------------------------------------------------------------
// Catch All Default ISRs: 
//

interrupt void EMPTY_ISR(void)  // Empty ISR - only does a return.
{

}

interrupt void PIE_RESERVED(void)  // Reserved space.  For test.
{
  asm ("      ESTOP0");
  for(;;);
}

interrupt void rsvd_ISR(void)      // For test
{
  asm ("      ESTOP0");
  for(;;);
}

//===========================================================================
// End of file.
//===========================================================================