notes_history.sgml

来自「OTP是开放电信平台的简称」· SGML 代码 · 共 443 行

<!doctype chapter PUBLIC "-//Stork//DTD chapter//EN">
<!-- 
 ``The contents of this file are subject to the Erlang Public License,
 Version 1.1, (the "License"); you may not use this file except in
 compliance with the License. You should have received a copy of the
 Erlang Public License along with this software. If not, it can be
 retrieved via the world wide web at http://www.erlang.org/.
 
 Software distributed under the License is distributed on an "AS IS"
 basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 the License for the specific language governing rights and limitations
 under the License.
 
 The Initial Developer of the Original Code is Ericsson Utvecklings AB.
 Portions created by Ericsson are Copyright 1999, Ericsson Utvecklings
 AB. All Rights Reserved.''
 
     $Id$
-->
<chapter>
  <header>
    <title>KERNEL Release Notes
    <prepared>Kenneth Lundin
    <docno>
    <date>1997-11-17
    <rev>F
    <file>notes.sgml
  </header>

  <p>This document describes the changes made to the Kernel application.


  <section>
    <title>Kernel 1.3.2</title>

    <section>
      <title>Fixed Bugs and malfunctions</title>
      <list>
	<item>
	  <p><c>file:stop</c> does not hang any more.
	  <p>Own Id:OTP-1404

	<item>
	  <p><c>net_kernel</c> could in some situations send two
	  nodeup messages to the monitor processes (processes that
	  have evaluated <c>net_kernel:monitor_nodes()</c>).

	  <p>This problem could make <c>global</c> hang when several
	  nodes connected.

	  <p>Own Id:OTP-1418; OTP-1127, OTP-1412
	  <br>Aux Id:tir-d-088

	<item>
	  <p><c>net_kernel</c> did not send nodedown messages for
	  allowed nodes. If net_kernel:allow(Nodes) was used, no
	  nodedown messages at all were sent to monitor processes
	  net_kernel.
 
	  <p>nodedown messages are now sent for allowed nodes but are
	    ignored for connection attempts from disallowed nodes.

	  <p>Own Id:OTP-1419

	<item>
	  <p><c>application_controller</c> had sync problems in the
            takeover phase when an application was remote started.

	  <p>Own Id:OTP-1426

	<item>
	  <p><c>application_controller</c> did sometimes report
	    <c>{error,{not_started,App}}</c> even though the
	    application in question has been started on another node.

	  <p>Own Id:OTP-1454
	  <br>Aux Id:HA52440

	<item>
	  <p><c>application_controller</c> could hang due to a
	    deadlock situation during startup in a distributed system.

	  <p>Own Id:OTP-1472

      </list>
    </section>

    <section>
      <title>Improvements and new features</title>
      <list>
	<item>
	  <p>The support for dynamic loading of drivers in module <c>erl_ddll</c> is enhanced with
	    reference counting of loaded drivers and automatic unloading of drivers when the "owner"
	    process terminates.
	  <p>Own Id:OTP-1460
	<item>
	  <p>The <c>os</c> module has got 2 new functions <c>getenv/1</c> to read environment variables from the hos operating system and <c>find_executable/1,2</c> to find executable programs using a
	    search path.
	  <p>Own Id:OTP-1461
	<item>
	  <p>A new function <c>application:which_application(Module)</c> which returns the 
	    application that <c>Module</c> belongs to.
	  <p>Own Id:OTP-1008
      </list>

    </section>
  </section>

  <section>
    <title>Kernel 1.3.1</title>

    <section>
      <title>Fixed Bugs and malfunctions</title>
      <list>
	<item>
	  <p>Malformed string/list as argument to unix:cmd/1 caused entire
	  ERTS to crash.
	  <p>Own Id: OTP-1384
	<item>
	  <p>It was not possible to convert a non distributed system
	    into a distributed system as stated in the net_kernel
	    reference manual.
	    Note that this is not the recommended way to start a
	    distributed system.
	  <p>Own Id: OTP-1393
	<item>
	  <p><c>net_adm:world/1</c> was broken on Windows NT, since it relied
	  on <c>unix:cmd/1</c>.
	  <p>Own Id: OTP-1397
	<item>
	  <p>The <c>disk_log_server</c>  now clears it's state correctly 
		when a disk_log process terminates.
	  <p>Own Id: OTP-1402
      </list>
    </section>
  </section>

  <section>
    <title>Kernel 1.3</title>

    <section>
      <title>Improvements and new features</title>

      <list>
	<item>
	  <p><c>net_ticktime</c> is configurable through the <c>kernel</c>
	    application. <c>net_ticktime</c> specifies the time within which
	    a non responding node will be considered to be down.

	<item>
	  <p><c>-boot_var</c> flag read by <c>init</c>. This flag is used
	    to set a path variable in the boot script. If applications
	    will be placed under another directory than $ROOT/lib in an
	    embedded system this flag can be used.
	
	<item>
	  <p>A new function for controlling execution of applications
	    is added; <c>application:permit/2</c>.  The function
	    controls which applications are permitted to execute on
	    the node.

	<item>
	  <p>A new configuration parameter <c>permissions</c>
	    specifies the default permission an application has when
	    it is loaded.

	<item><p>New functions in <c>application</c>. <br>
	    <c>application:load(App, Dist)</c> - set (and check!)
	    distribution configuration for an application at load
	    time.<br> <c>application:get_application/0,1</c> - get the
	    application of a pid.
	  <p>Own Id: OTP-1306

	<item><p><c>.config</c> files are now allowed to contain
	    comments.
	  <p>Own Id: OTP-1134
	    <br>Aux Id: HA37561

	<item><p>It is now possible to specify more than one
	    configuration file to <c>erl</c>, by using the command
	    line flag <c>-config</c>.

	<item>
	  <p>The code server (module <c>code</c>) did sometimes store
	    relative pathnames which could cause troubles in some cases. 
	    The code server is changed to always store absolute pathnames.
	  <p>Own Id: OTP-1239
	    <br>Aux Id: erlang/66

	<item>
	  <p>An elucidation regarding strings in the <c>code</c> module.
	    Since the <c>1.1</c> version of the kernel application the
	    <c>code</c> module always returns directory (and file) names as
	    strings. See the <c>code(3)</c> manual page.
	  <p>It is preferable that directory names are provided as strings
	    to all functions. The possibility to provide directory names
	    as atoms may be removed in future releases. Module names
	    should always be given as atoms and the possibility to provide
	    module names as strings may be removed in future releases.
	  <p>Own Id: OTP-1186

	<item><p> <c>code:priv_dir/1</c> was very slow and is made
	    much faster now.  <p>Own Id: OTP-1339

	<item><p>The module <c>disk_log</c> is moved from
	    <c>stdlib</c> to <c>kernel</c>, and some new functionality
	    is added.  <c>disk_log</c> supports wrap and halt logs,
	    the size of a log is configurable, it supports different
	    file formats, and it supports replicated logs.
	  <p>Own Id: OTP-1305

	<item>
	  <p>The <c>erl_boot_server</c> is dynamically configurable.
	  <p>Own Id: OTP-1275

	<item>
	  <p>The functions <c>add_slave/1</c>, <c>delete_slave/1</c> and
	    <c>which_slaves/0</c> are added to the <c>erl_boot_server</c>.

	<item><p> New option <c>raw</c> to <c>file:open</c> and also a
	    new variant of the function which takes a list of
	    options. The open with an optionlist is the recommended
	    way to open a file from no on.
	  <p>Own Id: OTP-1242

	<item>
	  <p>New format for the <c>Reason</c> field when <c>{error,Reason}</c>
	    is returned from functions in the <c>file</c> module. There is
	    also new documentation about this in the reference manual.
	    <p>Own Id: OTP-1075
	</item>

	<item><p> The configuration parameter <c>os</c> is removed
	    from <c>kernel.app</c>.  The function <c>os:type()</c> is
	    used instead.
	  <p>Own Id: OTP-1277
	    
      </list>
    </section>

    <section>
      <title>Fixed Bugs and malfunctions</title>
      <list>
	<item>
	  <p><c>net_adm:world()</c> is corrected on Windows NT.
	  <p>Own Id: OTP-1219
	<item>
	<p><c>file:list_dir("c:")</c> returns "No such file..." on NT
	<p>Own Id:OTP-1237
	<item>
	  <p>Bad call to <c>c:c/1</c> did crash the Erlang shell.
	    Solved by addition of a better test that a module name is correct.
	  <p>Own Id: OTP-1256
	    <br>Aux Id: erlang/73
 
	<item>
	  <p>The <c>rpc:cast</c> function was synchronous when casted function
	    call was performed at the current node.
	  <p>Own Id: OTP-1292
	</list>
      
    </section>

    <section>
      <title>Incompatibilities with Kernel 1.1.1</title>
      <list>
	<item>
	  <p>New format for the <c>Reason</c> field when <c>{error,Reason}</c>
	    is returned from functions in the <c>file</c> module. 
	    This is an interface change (the format of <c> Reason</c> but
	    it will only break a minimal amount (if any) of old code since
	    the previous format of <c>Reason</c> was more or less useless
	    in match operations.  There where also errors in the documentation
	    and other inconsistencies with the old format.
	    <p>The most likely places where old code needs to be adjusted is where the  highlevel functions <c>consult</c>, <c>path_consult</c>, <c>eval</c> and <c>path_eval</c> in combination with a  match for the result <c>{error,open}</c> is used.
	    <p>Own Id: OTP-1075
	</item>
	</list>
    </section>

    <section>
      <title>Known bugs and problems</title>
      
      <p>-
    </section>
  </section>

  <section>
    <title>Kernel 1.1.1</title>

    <section>
      <title>Improvements and new feature</title>

      <p>-
    </section>

    <section>
      <title>Fixed Bugs and malfunctions</title>
      
      <list>

	<item>
	  <p><c>application:get_env/1</c> returned <c>undefined</c>
	    for all parameters during startup of an application.

	  <p>Own Id: OTP-1079

	<item>
	  <p>When synchronization of mandatory node fails using the
	    <c>sync_nodes_mandatory</c> configuration parameter , the
	    node should be takendown, but it wasn't.

	  <p>Own Id: OTP-1083

	<item>
	  <p>Manual page for file corrected.

	  <p>Own Id: OTP-1102

	<item>
	  <p>Attempt to start an application when already running
	    causes error.  Now <c>application:start/1,2</c> returns
	    <c>{error,{already_started,Name}}</c> if the application
	    is running.

	  <p>Own Id: OTP-1111
	    <br>Aux Id: tir-f-087, tir-d-087

	<item>
	  <p>Restart (<c>init:restart/0</c>) of system did not work
	    after a software upgrade. Started using the now old
	    version.

	  <p>Own Id: OTP-1113
	    <br>Aux Id: HA37170

	<item>
	  <p><c>init:stop/0</c> did not work after a restart
	  (<c>init:restart/0</c>).

	  <p>Own Id: OTP-1117

      </list>
    </section>

    <section>
      <title>Incompatibilities with Kernel 1.1</title>

      <p>-
    </section>

    <section>
      <title>Known bugs and problems</title>
      
      <p>-
    </section>
  </section>

  <section>
    <title>Kernel 1.1</title>

    <section>
      <title>Improvements and new feature</title>
      <list>
        <item>
	  <p>Application configuration paramaters can be given from
	    the command line (overrides the configuration file):
<code>
erl -Appl Key Value
</code>

	<item>
	  <p>Load applications before start. All applications (included
	    in the boot script) are loaded before the first application is
	    started.

	<item>
	  <p>Heart uses the hardware watchdog (Solaris), see heart(3).

	<item>
	  <p>Added <c>error_logger:info_msg/1,2</c>.

	<item>
	  <p>Support for distributed applications enhanced and
	  documented.

      </list>
    </section>

    <section>
      <title>Fixed Bugs and malfunctions</title>
      
      <list>
	<item>
	  <p><c>net_adm:ping(Node)</c> will never return <c>pong</c>
	    if this node is not allowed (<c>net_kernel:allow/1</c>) to
	    connect to <c>Node</c>.

	<item>
	  <p><c>net_kernel:allow/1</c> handles hidden nodes. 

      </list>
    </section>

    <section>
      <title>Incompatibilities with OTP P1G</title>
      <list>
	<item>
	  <p>A configuration file must have suffix .config. (For example,
	    to use the file sys.config, erl -config ./sys is used)
	    
	<item>
	  <p>Old boot scripts won't work - generate new with systools.

	<item>
	  <p>Added the application behaviour.
	    Change in .app file: previously, <c>{start, {M, F, A}}</c>
	    was specified, now <c>{mod, {M, A}}</c> should be specified,
	    and <c>M:start(Type, A)</c> is called.

        <item>
	  <p><c>code:root_dir/0</c>, <c>code:lib_dir/0</c>,
	    <c>code:compiler_dir/0</c> and <c>code:uc_dir/0</c> returns
	    a string.

	<item>
	  <p>The <c>error_handler</c> is silent, e.g. it will not write
	    <c>** cannot autoload: Mod **</c> and
	    <c>** undefined registered name: Name **</c> to stdout any
	    longer.
      </list>
    </section>

    <section>
      <title>Known bugs and problems</title>
      
      <p>-
    </section>
  </section>
</chapter>