install

中星微 zx301 130万摄像头arm2410 linuxkernel下驱动程序

Module compile outside the kernel tree but need the source of your running
kernel installed and configured.
be sure your kernel include usb and v4l stuff
Kernel 2.4.x 
	configure your kernel
	make dep
	go to the spca5xx directories
	make clean (to be sure)
	make
	if all goes right as root :
	make install
Kernel 2.6.x
	make clean
	make
	if all goes right as root :
	make install
	
To test please use the command line spcaview tool.
You need libsdl installed with the header from your distro or goto http://www.libsdl.org
/*******************************************************************************************/
	SPCAVIEW is the only V4L1 Apps for testing your SPCA5XX webcam.
	IF THAT WORK WITH SPCAVIEW ALL OTHERS V4L1 APPS SHOULD WORK !!!
	DON'T ASK ME ABOUT :
	XAWTV GNOMEMEETING MOTION EKIGA AMSN ZONEMINDER CAMORAMA CAMSTREAM
	VIDEODOG PALANTIR SPOKE CAMSOURCE MPLAYER VLC FFMPEG MPEG4IP .....
		ASK THE AUTHORS. YOU SHOULD GET A BETTER ANSWER !!!
/*******************************************************************************************/

plug the cam
as root :
	lsmod
	spca5xx should be load with videodev, if not, somethings goes wrong,
	verify that your cam is supported if not and you are sure for a Sunplus
	chip goto irc.freenode.net channel #spca50x and ask for help
	if yes run spcaview with this parameters (maybe read the readme is the
	best)
	spcaview -d /dev/video0 -f yuv 
	if you have a bttv card use change the video0 to video1
	that should work
	Enjoy !!