fsksim_bp.dat

《无线通信系统仿真——c++使用模型》这本书的源代码

$
system
Date_In_Short_Rpt_Name = false
Date_In_Full_Rpt_Name = false
Max_Pass_Number = 500
$
bit_gen
Nnitial_Seed = 7733115
Initial_Seed = 69069235
$
wave_gen
Pulse_Duration = 1.0
Delay_To_First_Edge = 0.0
Lxo_Val = -1.0
Hxi_Val = 1.0
Lo_Val = -0.707107
Hi_Val = 0.707107
Samps_Per_Bit = 256.0
$
bit_delay
Delay_Mode = DELAY_MODE_FIXED
Initial_Delay_In_Samps = 1
$
clock_delay
Delay_Mode = DELAY_MODE_FIXED
Jnitial_Delay_In_Samps = 128
Initial_Delay_In_Samps = 160
$
tx_baseband_filter
Bypass_Enabled = true
Filt_Order = 2
Filt_Band_Config = LOWPASS_FILT_BAND_CONFIG
Norm_Hz_Pass_Edge = 4.0
Resp_Plot_Enabled = false
Db_Scale_Enabled = false
$
fsk_mod
Freq_Lo_Hz = 7.0
Freq_Hi_Hz = 9.0
Lo_Control_Val = -0.707107
Hi_Control_Val = 0.707107
Full_Scale_Output_Level = 1.0
$
modulator_spec_an
Num_Segs_To_Avg = 200
Seg_Len = 2000
Fft_Len = 2048
Hold_Off = 0
Psd_File_Name = fsk_psd.txt
Output_In_Decibels = true
Halt_When_Completed = false
$
lo_filt_spec_an
Num_Segs_To_Avg = 200
Seg_Len = 2000
Fft_Len = 2048
Hold_Off = 0
Psd_File_Name = lo_filt_psd.txt
Output_In_Decibels = true
Halt_When_Completed = false
$
hi_filt_spec_an
Num_Segs_To_Avg = 200
Seg_Len = 2000
Fft_Len = 2048
Hold_Off = 0
Psd_File_Name = hi_filt_psd.txt
Output_In_Decibels = true
Halt_When_Completed = false
$
agn_source
Anticip_Input_Pwr = 0.5
Desired_Output_Pwr = 1.0
Desired_Eb_No = 10.0
Symb_Period = 1.0
Num_Bits_Per_Symb = 1
Time_Const_For_Pwr_Mtr = 30.0
Seed = 69069
xeed = 113559
Sig_Pwr_Meas_Enabled = true
Outpt_Pwr_Scaling_On = false
Sig_Filtering_Enabled = false
&
cxxarrier_recovery
Carrier_Freq_Hz = 8.0
Freq_Offset_Hz = 1.0
$
fsk_dem
Samps_Per_Symb = 256
Dly_To_Start = 0.0
$
fsk_dem:Lo_Freq_Filter
Bypass_Enabled = false
Filt_Order = 8
Filt_Band_Config = BANDPASS_FILT_BAND_CONFIG
Norm_Hz_Pass_Edge = 6.45
Norm_Hz_Pass_Edge_2 = 7.55
Resp_Plot_Enabled = true
Db_Scale_Enabled = false
$
fsk_dem:Hi_Freq_Filter
Bypass_Enabled = false
Filt_Order = 8
Filt_Band_Config = BANDPASS_FILT_BAND_CONFIG
Norm_Hz_Pass_Edge = 8.45
Norm_Hz_Pass_Edge_2 = 9.55
Resp_Plot_Enabled = true
Db_Scale_Enabled = false
$
fsk_dem:Lo_Envel_Filter
Bypass_Enabled = false
Filt_Order = 2
Filt_Band_Config = LOWPASS_FILT_BAND_CONFIG
Norm_Hz_Pass_Edge = 0.75
Resp_Plot_Enabled = false
Db_Scale_Enabled = false
$
fsk_dem:Hi_Envel_Filter
Bypass_Enabled = false
Filt_Order = 2
Filt_Band_Config = LOWPASS_FILT_BAND_CONFIG
Norm_Hz_Pass_Edge = 0.75
Resp_Plot_Enabled = false
Db_Scale_Enabled = false
$
lo_timing_corr
Num_Corr_Passes = 5
Limited_Search_Window_Enab = false
Search_Window_Beg = -100
Search_Window_End = 100
Invert_Input_Sig_Enab = true
$
temp_anchor_1
block_size = 4096
samp_intvl = 0.00390625
$
ber_ctr
Num_Holdoff_Passes = 1
Report_Intvl_In_Blocks = 1
$
SignalPlotter
Num_Plot_Sigs = 14
bit_vals, 0.0, 500.0, 1, 1, 0
bit_decis, 0.0, 500.0, 1, 1, 0
baseband_wave, 0.0, 500.0, 1, 0, 0
filt_baseband_wave, 0.0, 500.0, 1, 0, 0
symb_clock, 0.0, 500.0, 1, 0, 0
delayed_clock, 0.0, 500.0, 1, 0, 0
power_meas_sig, 0.0, 500.0, 1, 0, 0
modulated_signal, 0.0, 500.0, 1, 0, 0
noisy_sig, 0.0, 500.0, 1, 0, 0
lo_fsk_filt_sig, 0.0, 500.0, 1, 0, 0
hi_fsk_filt_sig, 0.0, 500.0, 1, 0, 0
lo_integ_sig, 0.0, 500.0, 1, 0, 0
hi_integ_sig, 0.0, 500.0, 1, 0, 0
lo_rx_cross_corr, 0.0, 500.0, 1, 0, 0
$
$EOF
start_time
stop_time
plot_decim_rate
count_vice_time
file_header_req