radio_bs.c

软件无线电的平台

/***************************************************************************
               radio_bs.c  -  SRadio simple bs
                            -------------------
    begin                :  02/10/30
    authors              :  Linus Gasser
    emails               :  [e-mail]
 ***************************************************************************/

/***************************************************************************
                                 Changes
                                 -------
 date - name - description
 02/10/30 - ineiti - begin
 02/11/04 - ineiti - no msgqs...
 03/02/27 - ineiti - simplified to only two slots: BCH and RACH
 03/03/19 - ineiti - added SCH and gain-control
 04/03/02 - ineiti - re-enabled gain-control
 04/04/20 - ineiti - fixed exiting
 
 **************************************************************************/

/***************************************************************************
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License, or     *
 *   (at your option) any later version.                                   *
 *                                                                         *
 ***************************************************************************/


/**
 * Make a simple BS
 *
 * Function:
 * - emit sync
 * - one uplink with OFDM
 * - one uplink without OFDM
 */

#include "system.h"
#include "sdb.h"
#include "stfa.h"
#include "antenna.h"
#include "std.h"
#include "debugging.h"
#include "../ofdm_radio.h"
#include "chain.h"


#define ANTENNA 0
#define DBG_LVL 4
#define TARGET_MOBILE_HERE 1000*1000

swr_sdb_id stfa, sch, mafi;
struct chain_t *ch_bch, *ch_up1, *ch_up2;
struct bch_struct bch_data;
double gain;

int looping;

/**
 * Once a frame this function is called. Do here whatever seems accurate...
 */
int do_send_down( int msg, void *data, swr_sdb_id ret_id ) {
#ifdef USER_SPACE
  // Have some fun - move the BS. This is done 'automatically' in real-mode
  swr_sdb_set_config_int( stfa, "offset_chips_rcv", looping );
#endif

  return 0;
}


void *start_it( void *arg ) {
  swr_sdb_id mod, ofdm;

  looping = 1;
  gain = 0.;

  usleep( 100000 );

  PR( "Init STFA\n" );
  stfa = swr_sdb_instantiate_name( "stfa" );
  PR( "Initialized STFA\n" );
  swr_sdb_set_config_int( stfa, "slots_per_frame", SLOTS );
  swr_sdb_set_config_int( stfa, "blocks_per_slot", SLOT_LEN );
  swr_sdb_set_config_int( stfa, "slot_send_offset", SLOT_OFFSET );

  PR( "Setting up BCh on slot 0\n" );
  ch_bch = swr_chain_create(
             NEW_SPC_VAR( "sch_send", sch ),
             NEW_SPC_VAR( "mapper", mod ),
             NEW_SPC( "spread" ),
             NEW_SPC( "midamble" ),
             NEW_SPC( "synch_send" ),
             NEW_SPC( "rrc" ),
             OLD_SPC_IN( stfa, 0 ),
             CHAIN_END );
  swr_stfa_notice_sdb( stfa, 0, sch );
  swr_sdb_set_config_int( sch, "id0", 0x1234 );
  swr_sdb_set_config_int( sch, "uplinks0", 2 );

  ch_up1 = swr_chain_create(
             OLD_SPC_OUT( stfa, 1 ),
             NEW_SPC_VAR( "matched_filter", mafi ),
             NEW_SPC_VAR( "ofdm_rcv", ofdm ),
             NEW_SPC( "slicer" ),
             NEW_SPC( "sink" ),
             CHAIN_END );
  swr_sdb_set_config_double( ofdm, "mult", 5 );
  swr_sdb_set_config_int_array( sch, "mafi0", 0, mafi );
  swr_sdb_set_config_double( sch, "target_snr0", 20 );

  ch_up2 = swr_chain_create(
             OLD_SPC_OUT( stfa, 4 ),
             NEW_SPC( "matched_filter" ),
             NEW_SPC( "slicer" ),
             NEW_SPC( "sink" ),
             CHAIN_END );

  swr_stfa_notice_func( stfa, 2, do_send_down );
  swr_stfa_go( stfa );

  while ( looping++ ) {
    usleep( 1000000 );
  }

  swr_stfa_stop( stfa );

  return 0;
}


struct thread start;

/**
 * This function is called upon "insmod" and is used to register the
 * different parts of the module to the SPM.
 */
int um_module_init(void) {

  MOD_INC_USE_COUNT;
  looping = 0;
  ch_bch = NULL;
  ch_up1 = ch_up2 = NULL;
  if ( swr_thread_init( &start, start_it, NULL ) ) {
    goto rrc_no_thread;
  }
  MOD_DEC_USE_COUNT;
  return 0;

rrc_no_thread:
  PR_DBG( 0, "Couldn't init thread\n" );
  MOD_DEC_USE_COUNT;
  return -1;
}



void um_module_exit( void ) {
  looping = 0;

  swr_thread_free( &start, NULL );
  PR_DBG( 0, "deleting everything\n" );
  swr_chain_destroy( ch_bch );
  swr_chain_destroy( ch_up1 );
  swr_chain_destroy( ch_up2 );
  swr_sdb_destroy( stfa );
}


module_init( um_module_init );
module_exit( um_module_exit );