head.h

无线红外传感报警系统

#include<reg52.h>
#include<intrins.h>
#define uchar unsigned char
#define uint  unsigned int
extern uchar Sound[],musicstate,Alarm,PhoneNO[];//声音、警报、电话号码、摘机挂机
extern uint TimeCNT,timer0;//,
extern uchar data TimeBT,Funtion;//,temp_182;
extern uchar InputBuff[],InputLen,InputBuff2[],Inputcounter;
extern bit data SoundEn,AlarmHappen,InputDone,InputErr,InputEn,GetPSW,SecondInPut,checksignal;
//--------------8880------------------------
extern bit HANG;


static bit zc1;
//extern uchar data zc1;
sbit WR_80=P1^4;
sbit CP_80=P1^5;
sbit RS_80=P1^6;
sbit CS_80=P1^7;
//--------------phone---------
sbit HANDUP=P3^5;
sbit LINE  =P3^6;
sbit LED0=P2^7;
//------------chenles---------------------
sbit IN1=P0^0;
sbit IN2=P0^1;
sbit IN3=P0^2;
sbit IN4=P0^3;

sbit CH1=P0^4;
sbit CH2=P0^5;
sbit CH3=P0^6;
sbit CH4=P0^7;
//------------------ISD2560-----------------
sbit EOM_ISD=P3^4;
sbit PD_ISD =P3^7;
sbit CE_ISD =P2^0;
sbit A0_ISD =P2^1;
//-----------------24c01---------------------

sbit SCL=P2^2;        //定义IIC总线的在MCU上的具体IO引脚号。在具体电路中，应根据具体情况作相应的修改
sbit SDA=P2^3;
//------------------------------------------
//sbit Button1=P2^4;
//sbit Button2=P2^6;  //温度的脚的定义
//------------------------------------------
bit music(unsigned char *buff);
//*****************************
bit   RW24XX(unsigned char *DataBuff,unsigned char ByteQuantity,unsigned char Address,
                     unsigned char ControlByte);
//*****************************
unsigned char Read_80status(void);
void  Write_80Cont(unsigned char command);
unsigned char Read_80Data(void);
void  Write_80Data(unsigned char command);
void initial_8880(void);
//******************************************
void IniSerial(void);/////////////////////////////////////////////lu
//void Send_tx(unsigned char tx_data[16]);////////////////////////////////////////////////lu
void MainInitial(void);
//uchar CheckButton(void);
bit SendDTMF(uchar * buff);
bit Compare(void);
void ChanleCTL(uchar Valule,uchar Status);
unsigned int get_temp (void);
uchar loopdata(uchar dd);