freescale

Freescale 系列单片机常用模块与综合系统设计

/** ###################################################################
**     THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
**     Filename  : AD1.H
**     Project   : accelerometer
**     Processor : MC9S08JM60CLHE
**     Beantype  : ADC
**     Version   : Bean 01.452, Driver 01.21, CPU db: 3.00.033
**     Compiler  : CodeWarrior HCS08 C Compiler
**     Date/Time : 2009-10-12, 18:01
**     Abstract  :
**         This device "ADC" implements an A/D converter,
**         its control methods and interrupt/event handling procedure.
**     Settings  :
**         AD control register         : ADCSC1      [$0010]
**         AD control register         : ADCCFG      [$0016]
**         AD control register         : ADCRH       [$0012]
**         AD control register         : ADCRL       [$0013]
**         AD control register         : ADCCVH      [$0014]
**         AD control register         : ADCCVL      [$0015]
**         AD control register         : ADCSC2      [$0011]
**         AD control register         : APCTL1      [$0017]
**         AD control register         : APCTL2      [$0018]
**         AD result register          : ADCres      [$0012]
**         AD result register          : ADCres      [$0012]
**         Interrupt name              : Vadc
**         Priority                    : 
**         User handling procedure     : AD1_OnEnd
**         Number of conversions       : 1
**         AD resolution               : 12-bit
**
**         Input pins
**
**              Port name              : PTD
**              Bit number (in port)   : 3
**              Bit mask of the port   : $0008
**              Port data register     : PTDD        [$0006]
**              Port control register  : PTDDD       [$0007]
**
**              Port name              : PTD
**              Bit number (in port)   : 4
**              Bit mask of the port   : $0010
**              Port data register     : PTDD        [$0006]
**              Port control register  : PTDDD       [$0007]
**
**         Initialization:
**              Conversion             : Enabled
**              Event                  : Enabled
**         High speed mode
**             Prescaler               : divide-by-2
**     Contents  :
**         Measure    - byte AD1_Measure(bool WaitForResult);
**         GetValue16 - byte AD1_GetValue16(word *Values);
**
**     (c) Copyright UNIS, spol. s r.o. 1997-2008
**     UNIS, spol. s r.o.
**     Jundrovska 33
**     624 00 Brno
**     Czech Republic
**     http      : www.processorexpert.com
**     mail      : [e-mail]
** ###################################################################*/

#ifndef __AD1
#define __AD1

/*Include shared modules, which are used for whole project*/
#include "PE_Types.h"
#include "PE_Error.h"
#include "PE_Const.h"
#include "IO_Map.h"

/* MODULE AD1. */

#include "Cpu.h"




__interrupt void AD1_Interrupt(void);
/*
** ===================================================================
**     Method      :  AD1_Interrupt (bean ADC)
**
**     Description :
**         The method services the interrupt of the selected peripheral(s)
**         and eventually invokes event(s) of the bean.
**         This method is internal. It is used by Processor Expert only.
** ===================================================================
*/

void AD1_HWEnDi(void);
/*
** ===================================================================
**     Method      :  AD1_HWEnDi (bean ADC)
**
**     Description :
**         Enables or disables the peripheral(s) associated with the bean.
**         The method is called automatically as a part of the Enable and 
**         Disable methods and several internal methods.
**         This method is internal. It is used by Processor Expert only.
** ===================================================================
*/


byte AD1_Measure(bool WaitForResult);
/*
** ===================================================================
**     Method      :  AD1_Measure (bean ADC)
**
**     Description :
**         This method performs one measurement on all channels that
**         are set in the bean inspector. (Note: If the <number of
**         conversions> is more than one the conversion of A/D channels
**         is performed specified number of times.)
**     Parameters  :
**         NAME            - DESCRIPTION
**         WaitForResult   - Wait for a result of a
**                           conversion. If <interrupt service> is
**                           disabled, A/D peripheral doesn't support
**                           measuring all channels at once or Autoscan
**                           mode property isn't enabled and at the same
**                           time the <number of channel> is greater
**                           than 1, then the WaitForResult parameter is
**                           ignored and the method waits for each
**                           result every time. If the <interrupt
**                           service> is disabled and a <number of
**                           conversions> is greater than 1, the
**                           parameter is ignored and the method also
**                           waits for each result every time.
**     Returns     :
**         ---             - Error code, possible codes:
**                           ERR_OK - OK
**                           ERR_SPEED - This device does not work in
**                           the active speed mode
**                           ERR_DISABLED - Device is disabled
**                           ERR_BUSY - A conversion is already running
** ===================================================================
*/

byte AD1_GetValue16(word *Values);
/*
** ===================================================================
**     Method      :  AD1_GetValue16 (bean ADC)
**
**     Description :
**         This method returns the last measured values of all channels
**         justified to the left. Compared with <GetValue> method this
**         method returns more accurate result if the <number of
**         conversions> is greater than 1 and <AD resolution> is less
**         than 16 bits. In addition, the user code dependency on <AD
**         resolution> is eliminated.
**     Parameters  :
**         NAME            - DESCRIPTION
**       * Values          - Pointer to the array that contains
**                           the measured data.
**     Returns     :
**         ---             - Error code, possible codes:
**                           ERR_OK - OK
**                           ERR_SPEED - This device does not work in
**                           the active speed mode
**                           ERR_NOTAVAIL - Requested value not
**                           available
**                           ERR_OVERRUN - External trigger overrun flag
**                           was detected after the last value(s) was
**                           obtained (for example by GetValue). This
**                           error may not be supported on some CPUs
**                           (see generated code).
** ===================================================================
*/

void AD1_Init(void);
/*
** ===================================================================
**     Method      :  AD1_Init (bean ADC)
**
**     Description :
**         Initializes the associated peripheral(s) and the bean's 
**         internal variables. The method is called automatically as a 
**         part of the application initialization code.
**         This method is internal. It is used by Processor Expert only.
** ===================================================================
*/



/* END AD1. */

#endif /* ifndef __AD1 */
/*
** ###################################################################
**
**     This file was created by UNIS Processor Expert 3.03 [04.07]
**     for the Freescale HCS08 series of microcontrollers.
**
** ###################################################################
*/