⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 latency.c

📁 linux 2.6.19 kernel source code before patching
💻 C
字号:
/* * latency.c: Explicit system-wide latency-expectation infrastructure * * The purpose of this infrastructure is to allow device drivers to set * latency constraint they have and to collect and summarize these * expectations globally. The cummulated result can then be used by * power management and similar users to make decisions that have * tradoffs with a latency component. * * An example user of this are the x86 C-states; each higher C state saves * more power, but has a higher exit latency. For the idle loop power * code to make a good decision which C-state to use, information about * acceptable latencies is required. * * An example announcer of latency is an audio driver that knowns it * will get an interrupt when the hardware has 200 usec of samples * left in the DMA buffer; in that case the driver can set a latency * constraint of, say, 150 usec. * * Multiple drivers can each announce their maximum accepted latency, * to keep these appart, a string based identifier is used. * * * (C) Copyright 2006 Intel Corporation * Author: Arjan van de Ven <arjan@linux.intel.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; version 2 * of the License. */#include <linux/latency.h>#include <linux/list.h>#include <linux/spinlock.h>#include <linux/slab.h>#include <linux/module.h>#include <linux/notifier.h>#include <linux/jiffies.h>#include <asm/atomic.h>struct latency_info {	struct list_head list;	int usecs;	char *identifier;};/* * locking rule: all modifications to current_max_latency and * latency_list need to be done while holding the latency_lock. * latency_lock needs to be taken _irqsave. */static atomic_t current_max_latency;static DEFINE_SPINLOCK(latency_lock);static LIST_HEAD(latency_list);static BLOCKING_NOTIFIER_HEAD(latency_notifier);/* * This function returns the maximum latency allowed, which * happens to be the minimum of all maximum latencies on the * list. */static int __find_max_latency(void){	int min = INFINITE_LATENCY;	struct latency_info *info;	list_for_each_entry(info, &latency_list, list) {		if (info->usecs < min)			min = info->usecs;	}	return min;}/** * set_acceptable_latency - sets the maximum latency acceptable * @identifier: string that identifies this driver * @usecs: maximum acceptable latency for this driver * * This function informs the kernel that this device(driver) * can accept at most usecs latency. This setting is used for * power management and similar tradeoffs. * * This function sleeps and can only be called from process * context. * Calling this function with an existing identifier is valid * and will cause the existing latency setting to be changed. */void set_acceptable_latency(char *identifier, int usecs){	struct latency_info *info, *iter;	unsigned long flags;	int found_old = 0;	info = kzalloc(sizeof(struct latency_info), GFP_KERNEL);	if (!info)		return;	info->usecs = usecs;	info->identifier = kstrdup(identifier, GFP_KERNEL);	if (!info->identifier)		goto free_info;	spin_lock_irqsave(&latency_lock, flags);	list_for_each_entry(iter, &latency_list, list) {		if (strcmp(iter->identifier, identifier)==0) {			found_old = 1;			iter->usecs = usecs;			break;		}	}	if (!found_old)		list_add(&info->list, &latency_list);	if (usecs < atomic_read(&current_max_latency))		atomic_set(&current_max_latency, usecs);	spin_unlock_irqrestore(&latency_lock, flags);	blocking_notifier_call_chain(&latency_notifier,		atomic_read(&current_max_latency), NULL);	/*	 * if we inserted the new one, we're done; otherwise there was	 * an existing one so we need to free the redundant data	 */	if (!found_old)		return;	kfree(info->identifier);free_info:	kfree(info);}EXPORT_SYMBOL_GPL(set_acceptable_latency);/** * modify_acceptable_latency - changes the maximum latency acceptable * @identifier: string that identifies this driver * @usecs: maximum acceptable latency for this driver * * This function informs the kernel that this device(driver) * can accept at most usecs latency. This setting is used for * power management and similar tradeoffs. * * This function does not sleep and can be called in any context. * Trying to use a non-existing identifier silently gets ignored. * * Due to the atomic nature of this function, the modified latency * value will only be used for future decisions; past decisions * can still lead to longer latencies in the near future. */void modify_acceptable_latency(char *identifier, int usecs){	struct latency_info *iter;	unsigned long flags;	spin_lock_irqsave(&latency_lock, flags);	list_for_each_entry(iter, &latency_list, list) {		if (strcmp(iter->identifier, identifier) == 0) {			iter->usecs = usecs;			break;		}	}	if (usecs < atomic_read(&current_max_latency))		atomic_set(&current_max_latency, usecs);	spin_unlock_irqrestore(&latency_lock, flags);}EXPORT_SYMBOL_GPL(modify_acceptable_latency);/** * remove_acceptable_latency - removes the maximum latency acceptable * @identifier: string that identifies this driver * * This function removes a previously set maximum latency setting * for the driver and frees up any resources associated with the * bookkeeping needed for this. * * This function does not sleep and can be called in any context. * Trying to use a non-existing identifier silently gets ignored. */void remove_acceptable_latency(char *identifier){	unsigned long flags;	int newmax = 0;	struct latency_info *iter, *temp;	spin_lock_irqsave(&latency_lock, flags);	list_for_each_entry_safe(iter,  temp, &latency_list, list) {		if (strcmp(iter->identifier, identifier) == 0) {			list_del(&iter->list);			newmax = iter->usecs;			kfree(iter->identifier);			kfree(iter);			break;		}	}	/* If we just deleted the system wide value, we need to	 * recalculate with a full search	 */	if (newmax == atomic_read(&current_max_latency)) {		newmax = __find_max_latency();		atomic_set(&current_max_latency, newmax);	}	spin_unlock_irqrestore(&latency_lock, flags);}EXPORT_SYMBOL_GPL(remove_acceptable_latency);/** * system_latency_constraint - queries the system wide latency maximum * * This function returns the system wide maximum latency in * microseconds. * * This function does not sleep and can be called in any context. */int system_latency_constraint(void){	return atomic_read(&current_max_latency);}EXPORT_SYMBOL_GPL(system_latency_constraint);/** * synchronize_acceptable_latency - recalculates all latency decisions * * This function will cause a callback to various kernel pieces that * will make those pieces rethink their latency decisions. This implies * that if there are overlong latencies in hardware state already, those * latencies get taken right now. When this call completes no overlong * latency decisions should be active anymore. * * Typical usecase of this is after a modify_acceptable_latency() call, * which in itself is non-blocking and non-synchronizing. * * This function blocks and should not be called with locks held. */void synchronize_acceptable_latency(void){	blocking_notifier_call_chain(&latency_notifier,		atomic_read(&current_max_latency), NULL);}EXPORT_SYMBOL_GPL(synchronize_acceptable_latency);/* * Latency notifier: this notifier gets called when a non-atomic new * latency value gets set. The expectation nof the caller of the * non-atomic set is that when the call returns, future latencies * are within bounds, so the functions on the notifier list are * expected to take the overlong latencies immediately, inside the * callback, and not make a overlong latency decision anymore. * * The callback gets called when the new latency value is made * active so system_latency_constraint() returns the new latency. */int register_latency_notifier(struct notifier_block * nb){	return blocking_notifier_chain_register(&latency_notifier, nb);}EXPORT_SYMBOL_GPL(register_latency_notifier);int unregister_latency_notifier(struct notifier_block * nb){	return blocking_notifier_chain_unregister(&latency_notifier, nb);}EXPORT_SYMBOL_GPL(unregister_latency_notifier);static __init int latency_init(void){	atomic_set(&current_max_latency, INFINITE_LATENCY);	/*	 * we don't want by default to have longer latencies than 2 ticks,	 * since that would cause lost ticks	 */	set_acceptable_latency("kernel", 2*1000000/HZ);	return 0;}module_init(latency_init);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -