⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 swap.c

📁 linux 2.6.19 kernel source code before patching
💻 C
字号:
/* * linux/kernel/power/swap.c * * This file provides functions for reading the suspend image from * and writing it to a swap partition. * * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@suse.cz> * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> * * This file is released under the GPLv2. * */#include <linux/module.h>#include <linux/file.h>#include <linux/utsname.h>#include <linux/version.h>#include <linux/delay.h>#include <linux/bitops.h>#include <linux/genhd.h>#include <linux/device.h>#include <linux/buffer_head.h>#include <linux/bio.h>#include <linux/blkdev.h>#include <linux/swap.h>#include <linux/swapops.h>#include <linux/pm.h>#include "power.h"extern char resume_file[];#define SWSUSP_SIG	"S1SUSPEND"struct swsusp_header {	char reserved[PAGE_SIZE - 20 - sizeof(sector_t)];	sector_t image;	char	orig_sig[10];	char	sig[10];} __attribute__((packed));static struct swsusp_header *swsusp_header;/* * General things */static unsigned short root_swap = 0xffff;static struct block_device *resume_bdev;/** *	submit - submit BIO request. *	@rw:	READ or WRITE. *	@off	physical offset of page. *	@page:	page we're reading or writing. *	@bio_chain: list of pending biod (for async reading) * *	Straight from the textbook - allocate and initialize the bio. *	If we're reading, make sure the page is marked as dirty. *	Then submit it and, if @bio_chain == NULL, wait. */static int submit(int rw, pgoff_t page_off, struct page *page,			struct bio **bio_chain){	struct bio *bio;	bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);	if (!bio)		return -ENOMEM;	bio->bi_sector = page_off * (PAGE_SIZE >> 9);	bio->bi_bdev = resume_bdev;	bio->bi_end_io = end_swap_bio_read;	if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) {		printk("swsusp: ERROR: adding page to bio at %ld\n", page_off);		bio_put(bio);		return -EFAULT;	}	lock_page(page);	bio_get(bio);	if (bio_chain == NULL) {		submit_bio(rw | (1 << BIO_RW_SYNC), bio);		wait_on_page_locked(page);		if (rw == READ)			bio_set_pages_dirty(bio);		bio_put(bio);	} else {		if (rw == READ)			get_page(page);	/* These pages are freed later */		bio->bi_private = *bio_chain;		*bio_chain = bio;		submit_bio(rw | (1 << BIO_RW_SYNC), bio);	}	return 0;}static int bio_read_page(pgoff_t page_off, void *addr, struct bio **bio_chain){	return submit(READ, page_off, virt_to_page(addr), bio_chain);}static int bio_write_page(pgoff_t page_off, void *addr, struct bio **bio_chain){	return submit(WRITE, page_off, virt_to_page(addr), bio_chain);}static int wait_on_bio_chain(struct bio **bio_chain){	struct bio *bio;	struct bio *next_bio;	int ret = 0;	if (bio_chain == NULL)		return 0;	bio = *bio_chain;	if (bio == NULL)		return 0;	while (bio) {		struct page *page;		next_bio = bio->bi_private;		page = bio->bi_io_vec[0].bv_page;		wait_on_page_locked(page);		if (!PageUptodate(page) || PageError(page))			ret = -EIO;		put_page(page);		bio_put(bio);		bio = next_bio;	}	*bio_chain = NULL;	return ret;}/* * Saving part */static int mark_swapfiles(sector_t start){	int error;	bio_read_page(swsusp_resume_block, swsusp_header, NULL);	if (!memcmp("SWAP-SPACE",swsusp_header->sig, 10) ||	    !memcmp("SWAPSPACE2",swsusp_header->sig, 10)) {		memcpy(swsusp_header->orig_sig,swsusp_header->sig, 10);		memcpy(swsusp_header->sig,SWSUSP_SIG, 10);		swsusp_header->image = start;		error = bio_write_page(swsusp_resume_block,					swsusp_header, NULL);	} else {		printk(KERN_ERR "swsusp: Swap header not found!\n");		error = -ENODEV;	}	return error;}/** *	swsusp_swap_check - check if the resume device is a swap device *	and get its index (if so) */static int swsusp_swap_check(void) /* This is called before saving image */{	int res;	res = swap_type_of(swsusp_resume_device, swsusp_resume_block,			&resume_bdev);	if (res < 0)		return res;	root_swap = res;	res = blkdev_get(resume_bdev, FMODE_WRITE, O_RDWR);	if (res)		return res;	res = set_blocksize(resume_bdev, PAGE_SIZE);	if (res < 0)		blkdev_put(resume_bdev);	return res;}/** *	write_page - Write one page to given swap location. *	@buf:		Address we're writing. *	@offset:	Offset of the swap page we're writing to. *	@bio_chain:	Link the next write BIO here */static int write_page(void *buf, sector_t offset, struct bio **bio_chain){	void *src;	if (!offset)		return -ENOSPC;	if (bio_chain) {		src = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);		if (src) {			memcpy(src, buf, PAGE_SIZE);		} else {			WARN_ON_ONCE(1);			bio_chain = NULL;	/* Go synchronous */			src = buf;		}	} else {		src = buf;	}	return bio_write_page(offset, src, bio_chain);}/* *	The swap map is a data structure used for keeping track of each page *	written to a swap partition.  It consists of many swap_map_page *	structures that contain each an array of MAP_PAGE_SIZE swap entries. *	These structures are stored on the swap and linked together with the *	help of the .next_swap member. * *	The swap map is created during suspend.  The swap map pages are *	allocated and populated one at a time, so we only need one memory *	page to set up the entire structure. * *	During resume we also only need to use one swap_map_page structure *	at a time. */#define MAP_PAGE_ENTRIES	(PAGE_SIZE / sizeof(sector_t) - 1)struct swap_map_page {	sector_t entries[MAP_PAGE_ENTRIES];	sector_t next_swap;};/** *	The swap_map_handle structure is used for handling swap in *	a file-alike way */struct swap_map_handle {	struct swap_map_page *cur;	sector_t cur_swap;	unsigned int k;};static void release_swap_writer(struct swap_map_handle *handle){	if (handle->cur)		free_page((unsigned long)handle->cur);	handle->cur = NULL;}static int get_swap_writer(struct swap_map_handle *handle){	handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL);	if (!handle->cur)		return -ENOMEM;	handle->cur_swap = alloc_swapdev_block(root_swap);	if (!handle->cur_swap) {		release_swap_writer(handle);		return -ENOSPC;	}	handle->k = 0;	return 0;}static int swap_write_page(struct swap_map_handle *handle, void *buf,				struct bio **bio_chain){	int error = 0;	sector_t offset;	if (!handle->cur)		return -EINVAL;	offset = alloc_swapdev_block(root_swap);	error = write_page(buf, offset, bio_chain);	if (error)		return error;	handle->cur->entries[handle->k++] = offset;	if (handle->k >= MAP_PAGE_ENTRIES) {		error = wait_on_bio_chain(bio_chain);		if (error)			goto out;		offset = alloc_swapdev_block(root_swap);		if (!offset)			return -ENOSPC;		handle->cur->next_swap = offset;		error = write_page(handle->cur, handle->cur_swap, NULL);		if (error)			goto out;		memset(handle->cur, 0, PAGE_SIZE);		handle->cur_swap = offset;		handle->k = 0;	} out:	return error;}static int flush_swap_writer(struct swap_map_handle *handle){	if (handle->cur && handle->cur_swap)		return write_page(handle->cur, handle->cur_swap, NULL);	else		return -EINVAL;}/** *	save_image - save the suspend image data */static int save_image(struct swap_map_handle *handle,                      struct snapshot_handle *snapshot,                      unsigned int nr_to_write){	unsigned int m;	int ret;	int error = 0;	int nr_pages;	int err2;	struct bio *bio;	struct timeval start;	struct timeval stop;	printk("Saving image data pages (%u pages) ...     ", nr_to_write);	m = nr_to_write / 100;	if (!m)		m = 1;	nr_pages = 0;	bio = NULL;	do_gettimeofday(&start);	do {		ret = snapshot_read_next(snapshot, PAGE_SIZE);		if (ret > 0) {			error = swap_write_page(handle, data_of(*snapshot),						&bio);			if (error)				break;			if (!(nr_pages % m))				printk("\b\b\b\b%3d%%", nr_pages / m);			nr_pages++;		}	} while (ret > 0);	err2 = wait_on_bio_chain(&bio);	do_gettimeofday(&stop);	if (!error)		error = err2;	if (!error)		printk("\b\b\b\bdone\n");	swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");	return error;}/** *	enough_swap - Make sure we have enough swap to save the image. * *	Returns TRUE or FALSE after checking the total amount of swap *	space avaiable from the resume partition. */static int enough_swap(unsigned int nr_pages){	unsigned int free_swap = count_swap_pages(root_swap, 1);	pr_debug("swsusp: free swap pages: %u\n", free_swap);	return free_swap > nr_pages + PAGES_FOR_IO;}/** *	swsusp_write - Write entire image and metadata. * *	It is important _NOT_ to umount filesystems at this point. We want *	them synced (in case something goes wrong) but we DO not want to mark *	filesystem clean: it is not. (And it does not matter, if we resume *	correctly, we'll mark system clean, anyway.) */int swsusp_write(void){	struct swap_map_handle handle;	struct snapshot_handle snapshot;	struct swsusp_info *header;	int error;	error = swsusp_swap_check();	if (error) {		printk(KERN_ERR "swsusp: Cannot find swap device, try "				"swapon -a.\n");		return error;	}	memset(&snapshot, 0, sizeof(struct snapshot_handle));	error = snapshot_read_next(&snapshot, PAGE_SIZE);	if (error < PAGE_SIZE) {		if (error >= 0)			error = -EFAULT;		goto out;	}	header = (struct swsusp_info *)data_of(snapshot);	if (!enough_swap(header->pages)) {		printk(KERN_ERR "swsusp: Not enough free swap\n");		error = -ENOSPC;		goto out;	}	error = get_swap_writer(&handle);	if (!error) {		sector_t start = handle.cur_swap;		error = swap_write_page(&handle, header, NULL);		if (!error)			error = save_image(&handle, &snapshot,					header->pages - 1);		if (!error) {			flush_swap_writer(&handle);			printk("S");			error = mark_swapfiles(start);			printk("|\n");		}	}	if (error)		free_all_swap_pages(root_swap);	release_swap_writer(&handle); out:	swsusp_close();	return error;}/** *	The following functions allow us to read data using a swap map *	in a file-alike way */static void release_swap_reader(struct swap_map_handle *handle){	if (handle->cur)		free_page((unsigned long)handle->cur);	handle->cur = NULL;}static int get_swap_reader(struct swap_map_handle *handle, sector_t start){	int error;	if (!start)		return -EINVAL;	handle->cur = (struct swap_map_page *)get_zeroed_page(__GFP_WAIT | __GFP_HIGH);	if (!handle->cur)		return -ENOMEM;	error = bio_read_page(start, handle->cur, NULL);	if (error) {		release_swap_reader(handle);		return error;	}	handle->k = 0;	return 0;}static int swap_read_page(struct swap_map_handle *handle, void *buf,				struct bio **bio_chain){	sector_t offset;	int error;	if (!handle->cur)		return -EINVAL;	offset = handle->cur->entries[handle->k];	if (!offset)		return -EFAULT;	error = bio_read_page(offset, buf, bio_chain);	if (error)		return error;	if (++handle->k >= MAP_PAGE_ENTRIES) {		error = wait_on_bio_chain(bio_chain);		handle->k = 0;		offset = handle->cur->next_swap;		if (!offset)			release_swap_reader(handle);		else if (!error)			error = bio_read_page(offset, handle->cur, NULL);	}	return error;}/** *	load_image - load the image using the swap map handle *	@handle and the snapshot handle @snapshot *	(assume there are @nr_pages pages to load) */static int load_image(struct swap_map_handle *handle,                      struct snapshot_handle *snapshot,                      unsigned int nr_to_read){	unsigned int m;	int error = 0;	struct timeval start;	struct timeval stop;	struct bio *bio;	int err2;	unsigned nr_pages;	printk("Loading image data pages (%u pages) ...     ", nr_to_read);	m = nr_to_read / 100;	if (!m)		m = 1;	nr_pages = 0;	bio = NULL;	do_gettimeofday(&start);	for ( ; ; ) {		error = snapshot_write_next(snapshot, PAGE_SIZE);		if (error <= 0)			break;		error = swap_read_page(handle, data_of(*snapshot), &bio);		if (error)			break;		if (snapshot->sync_read)			error = wait_on_bio_chain(&bio);		if (error)			break;		if (!(nr_pages % m))			printk("\b\b\b\b%3d%%", nr_pages / m);		nr_pages++;	}	err2 = wait_on_bio_chain(&bio);	do_gettimeofday(&stop);	if (!error)		error = err2;	if (!error) {		printk("\b\b\b\bdone\n");		snapshot_write_finalize(snapshot);		if (!snapshot_image_loaded(snapshot))			error = -ENODATA;	}	swsusp_show_speed(&start, &stop, nr_to_read, "Read");	return error;}int swsusp_read(void){	int error;	struct swap_map_handle handle;	struct snapshot_handle snapshot;	struct swsusp_info *header;	if (IS_ERR(resume_bdev)) {		pr_debug("swsusp: block device not initialised\n");		return PTR_ERR(resume_bdev);	}	memset(&snapshot, 0, sizeof(struct snapshot_handle));	error = snapshot_write_next(&snapshot, PAGE_SIZE);	if (error < PAGE_SIZE)		return error < 0 ? error : -EFAULT;	header = (struct swsusp_info *)data_of(snapshot);	error = get_swap_reader(&handle, swsusp_header->image);	if (!error)		error = swap_read_page(&handle, header, NULL);	if (!error)		error = load_image(&handle, &snapshot, header->pages - 1);	release_swap_reader(&handle);	blkdev_put(resume_bdev);	if (!error)		pr_debug("swsusp: Reading resume file was successful\n");	else		pr_debug("swsusp: Error %d resuming\n", error);	return error;}/** *      swsusp_check - Check for swsusp signature in the resume device */int swsusp_check(void){	int error;	resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ);	if (!IS_ERR(resume_bdev)) {		set_blocksize(resume_bdev, PAGE_SIZE);		memset(swsusp_header, 0, PAGE_SIZE);		error = bio_read_page(swsusp_resume_block,					swsusp_header, NULL);		if (error)			return error;		if (!memcmp(SWSUSP_SIG, swsusp_header->sig, 10)) {			memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10);			/* Reset swap signature now */			error = bio_write_page(swsusp_resume_block,						swsusp_header, NULL);		} else {			return -EINVAL;		}		if (error)			blkdev_put(resume_bdev);		else			pr_debug("swsusp: Signature found, resuming\n");	} else {		error = PTR_ERR(resume_bdev);	}	if (error)		pr_debug("swsusp: Error %d check for resume file\n", error);	return error;}/** *	swsusp_close - close swap device. */void swsusp_close(void){	if (IS_ERR(resume_bdev)) {		pr_debug("swsusp: block device not initialised\n");		return;	}	blkdev_put(resume_bdev);}static int swsusp_header_init(void){	swsusp_header = (struct swsusp_header*) __get_free_page(GFP_KERNEL);	if (!swsusp_header)		panic("Could not allocate memory for swsusp_header\n");	return 0;}core_initcall(swsusp_header_init);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -