⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 store.c

📁 OMAP2530 uboot source code
💻 C
字号:
/* * (C) Copyright 2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>/* * CPU test * Store instructions:		stb(x)(u), sth(x)(u), stw(x)(u) * * All operations are performed on a 16-byte array. The array * is 4-byte aligned. The base register points to offset 8. * The immediate offset (index register) ranges in [-8 ... +7]. * The test cases are composed so that they do not * cause alignment exceptions. * The test contains a pre-built table describing all test cases. * The table entry contains: * the instruction opcode, the value of the index register and * the value of the source register. After executing the * instruction, the test verifies the contents of the array * and the value of the base register (it must change for "store * with update" instructions). */#ifdef CONFIG_POST#include <post.h>#include "cpu_asm.h"#if CONFIG_POST & CFG_POST_CPUextern void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3);extern void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2);static struct cpu_post_store_s{    ulong cmd;    uint width;    int update;    int index;    ulong offset;    ulong value;} cpu_post_store_table[] ={    {	OP_STW,	4,	0,	0,	-4,	0xff00ff00    },    {	OP_STH,	2,	0,	0,	-2,	0xff00    },    {	OP_STB,	1,	0,	0,	-1,	0xff    },    {	OP_STWU,	4,	1,	0,	-4,	0xff00ff00    },    {	OP_STHU,	2,	1,	0,	-2,	0xff00    },    {	OP_STBU,	1,	1,	0,	-1,	0xff    },    {	OP_STWX,	4,	0,	1,	-4,	0xff00ff00    },    {	OP_STHX,	2,	0,	1,	-2,	0xff00    },    {	OP_STBX,	1,	0,	1,	-1,	0xff    },    {	OP_STWUX,	4,	1,	1,	-4,	0xff00ff00    },    {	OP_STHUX,	2,	1,	1,	-2,	0xff00    },    {	OP_STBUX,	1,	1,	1,	-1,	0xff    },};static unsigned int cpu_post_store_size =    sizeof (cpu_post_store_table) / sizeof (struct cpu_post_store_s);int cpu_post_test_store (void){    int ret = 0;    unsigned int i;    for (i = 0; i < cpu_post_store_size && ret == 0; i++)    {	struct cpu_post_store_s *test = cpu_post_store_table + i;	uchar data[16] =	{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };	ulong base0 = (ulong) (data + 8);	ulong base = base0;	if (test->index)	{	    ulong code[] =	    {		ASM_12(test->cmd, 5, 3, 4),		ASM_BLR,	    };	    cpu_post_exec_12w (code, &base, test->offset, test->value);	}	else	{	    ulong code[] =	    {		ASM_11I(test->cmd, 4, 3, test->offset),		ASM_BLR,	    };	    cpu_post_exec_11w (code, &base, test->value);	}	if (ret == 0)	{	   if (test->update)	       ret = base == base0 + test->offset ? 0 : -1;	   else	       ret = base == base0 ? 0 : -1;	}	if (ret == 0)	{	    switch (test->width)	    {	    case 1:		ret = *(uchar *)(base0 + test->offset) == test->value ?		      0 : -1;		break;	    case 2:		ret = *(ushort *)(base0 + test->offset) == test->value ?		      0 : -1;		break;	    case 4:		ret = *(ulong *)(base0 + test->offset) == test->value ?		      0 : -1;		break;	    }	}	if (ret != 0)	{	    post_log ("Error at store test %d !\n", i);	}    }    return ret;}#endif#endif

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -