flash.c

OMAP2530 uboot source code

/*
 * (C) 2000 Wolfgang Denk, DENX Software Engineering, [e-mail].
 * (C) 2003 August Hoeraendl, Logotronic GmbH
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#undef CONFIG_FLASH_16BIT

#include <common.h>

#define FLASH_BANK_SIZE 0x1000000
#define MAIN_SECT_SIZE  0x20000		/* 2x64k = 128k per sector */

flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/

/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
 *        has nothing to do with the flash chip being 8-bit or 16-bit.
 */
#ifdef CONFIG_FLASH_16BIT
typedef unsigned short FLASH_PORT_WIDTH;
typedef volatile unsigned short FLASH_PORT_WIDTHV;

#define	FLASH_ID_MASK	0xFFFF
#else
typedef unsigned long FLASH_PORT_WIDTH;
typedef volatile unsigned long FLASH_PORT_WIDTHV;

#define	FLASH_ID_MASK	0xFFFFFFFF
#endif

#define FPW	FLASH_PORT_WIDTH
#define FPWV	FLASH_PORT_WIDTHV

#define ORMASK(size) ((-size) & OR_AM_MSK)

/*-----------------------------------------------------------------------
 * Functions
 */
static ulong flash_get_size(FPWV *addr, flash_info_t *info);
static void flash_reset(flash_info_t *info);
static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
#define write_word(in, de, da)   write_word_amd(in, de, da)
static void flash_get_offsets(ulong base, flash_info_t *info);
#ifdef CFG_FLASH_PROTECTION
static void flash_sync_real_protect(flash_info_t *info);
#endif

/*-----------------------------------------------------------------------
 * flash_init()
 *
 * sets up flash_info and returns size of FLASH (bytes)
 */
ulong flash_init(void)
{
    int i, j;
    ulong size = 0;

    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
    {
	ulong flashbase = 0;
	flash_info[i].flash_id =
	  (FLASH_MAN_AMD & FLASH_VENDMASK) |
	  (FLASH_AM640U & FLASH_TYPEMASK);
	flash_info[i].size = FLASH_BANK_SIZE;
	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
	switch (i)
	{
	   case 0:
		flashbase = PHYS_FLASH_1;
		break;
	   case 1:
		flashbase = PHYS_FLASH_2;
		break;
	   default:
		panic("configured too many flash banks!\n");
		break;
	}
	for (j = 0; j < flash_info[i].sector_count; j++)
	{
	    flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
	}
	size += flash_info[i].size;
    }

    /* Protect monitor and environment sectors
     */
    flash_protect(FLAG_PROTECT_SET,
		  CFG_FLASH_BASE,
		  CFG_FLASH_BASE + _bss_start - _armboot_start,
		  &flash_info[0]);

    flash_protect(FLAG_PROTECT_SET,
		  CFG_ENV_ADDR,
		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
		  &flash_info[0]);

    return size;
}

/*-----------------------------------------------------------------------
 */
static void flash_reset(flash_info_t *info)
{
	FPWV *base = (FPWV *)(info->start[0]);

	/* Put FLASH back in read mode */
	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
}

/*-----------------------------------------------------------------------
 */
static void flash_get_offsets (ulong base, flash_info_t *info)
{
	int i;

	/* set up sector start address table */
	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
	    && (info->flash_id & FLASH_BTYPE)) {
		int bootsect_size;	/* number of bytes/boot sector	*/
		int sect_size;		/* number of bytes/regular sector */

		bootsect_size = 0x00002000 * (sizeof(FPW)/2);
		sect_size =     0x00010000 * (sizeof(FPW)/2);

		/* set sector offsets for bottom boot block type	*/
		for (i = 0; i < 8; ++i) {
			info->start[i] = base + (i * bootsect_size);
		}
		for (i = 8; i < info->sector_count; i++) {
			info->start[i] = base + ((i - 7) * sect_size);
		}
	}
	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
		 && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {

		int sect_size;		/* number of bytes/sector */

		sect_size = 0x00010000 * (sizeof(FPW)/2);

		/* set up sector start address table (uniform sector type) */
		for( i = 0; i < info->sector_count; i++ )
			info->start[i] = base + (i * sect_size);
	}
}

/*-----------------------------------------------------------------------
 */

void flash_print_info (flash_info_t *info)
{
	int i;
	uchar *boottype;
	uchar *bootletter;
	uchar *fmt;
	uchar botbootletter[] = "B";
	uchar topbootletter[] = "T";
	uchar botboottype[] = "bottom boot sector";
	uchar topboottype[] = "top boot sector";

	if (info->flash_id == FLASH_UNKNOWN) {
		printf ("missing or unknown FLASH type\n");
		return;
	}

	switch (info->flash_id & FLASH_VENDMASK) {
	case FLASH_MAN_AMD:	printf ("AMD ");		break;
	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
	case FLASH_MAN_SST:	printf ("SST ");		break;
	case FLASH_MAN_STM:	printf ("STM ");		break;
	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
	default:		printf ("Unknown Vendor ");	break;
	}

	/* check for top or bottom boot, if it applies */
	if (info->flash_id & FLASH_BTYPE) {
		boottype = botboottype;
		bootletter = botbootletter;
	}
	else {
		boottype = topboottype;
		bootletter = topbootletter;
	}

	switch (info->flash_id & FLASH_TYPEMASK) {
	case FLASH_AM640U:
		fmt = "29LV641D (64 Mbit, uniform sectors)\n";
		break;
	case FLASH_28F800C3B:
	case FLASH_28F800C3T:
		fmt = "28F800C3%s (8 Mbit, %s)\n";
		break;
	case FLASH_INTEL800B:
	case FLASH_INTEL800T:
		fmt = "28F800B3%s (8 Mbit, %s)\n";
		break;
	case FLASH_28F160C3B:
	case FLASH_28F160C3T:
		fmt = "28F160C3%s (16 Mbit, %s)\n";
		break;
	case FLASH_INTEL160B:
	case FLASH_INTEL160T:
		fmt = "28F160B3%s (16 Mbit, %s)\n";
		break;
	case FLASH_28F320C3B:
	case FLASH_28F320C3T:
		fmt = "28F320C3%s (32 Mbit, %s)\n";
		break;
	case FLASH_INTEL320B:
	case FLASH_INTEL320T:
		fmt = "28F320B3%s (32 Mbit, %s)\n";
		break;
	case FLASH_28F640C3B:
	case FLASH_28F640C3T:
		fmt = "28F640C3%s (64 Mbit, %s)\n";
		break;
	case FLASH_INTEL640B:
	case FLASH_INTEL640T:
		fmt = "28F640B3%s (64 Mbit, %s)\n";
		break;
	default:
		fmt = "Unknown Chip Type\n";
		break;
	}

	printf (fmt, bootletter, boottype);

	printf ("  Size: %ld MB in %d Sectors\n",
		info->size >> 20,
		info->sector_count);

	printf ("  Sector Start Addresses:");

	for (i=0; i<info->sector_count; ++i) {
		if ((i % 5) == 0) {
			printf ("\n   ");
		}

		printf (" %08lX%s", info->start[i],
			info->protect[i] ? " (RO)" : "     ");
	}

	printf ("\n");
}

/*-----------------------------------------------------------------------
 */

/*
 * The following code cannot be run from FLASH!
 */

ulong flash_get_size (FPWV *addr, flash_info_t *info)
{
	/* Write auto select command: read Manufacturer ID */

	/* Write auto select command sequence and test FLASH answer */
	addr[0x0555] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
	addr[0x02AA] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
	addr[0x0555] = (FPW)0x00900090;	/* selects Intel or AMD */

	/* The manufacturer codes are only 1 byte, so just use 1 byte.
	 * This works for any bus width and any FLASH device width.
	 */
	switch (addr[0] & 0xff) {

	case (uchar)AMD_MANUFACT:
		info->flash_id = FLASH_MAN_AMD;
		break;

	case (uchar)INTEL_MANUFACT:
		info->flash_id = FLASH_MAN_INTEL;
		break;

	default:
		info->flash_id = FLASH_UNKNOWN;
		info->sector_count = 0;
		info->size = 0;
		break;
	}

	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
	if (info->flash_id != FLASH_UNKNOWN) switch (addr[1]) {

	case (FPW)AMD_ID_LV640U:	/* 29LV640 and 29LV641 have same ID */
		info->flash_id += FLASH_AM640U;
		info->sector_count = 128;
		info->size = 0x00800000 * (sizeof(FPW)/2);
		break;				/* => 8 or 16 MB	*/

	case (FPW)INTEL_ID_28F800C3B:
		info->flash_id += FLASH_28F800C3B;
		info->sector_count = 23;
		info->size = 0x00100000 * (sizeof(FPW)/2);
		break;				/* => 1 or 2 MB		*/

	case (FPW)INTEL_ID_28F800B3B:
		info->flash_id += FLASH_INTEL800B;
		info->sector_count = 23;
		info->size = 0x00100000 * (sizeof(FPW)/2);
		break;				/* => 1 or 2 MB		*/

	case (FPW)INTEL_ID_28F160C3B:
		info->flash_id += FLASH_28F160C3B;
		info->sector_count = 39;
		info->size = 0x00200000 * (sizeof(FPW)/2);
		break;				/* => 2 or 4 MB		*/

	case (FPW)INTEL_ID_28F160B3B:
		info->flash_id += FLASH_INTEL160B;
		info->sector_count = 39;
		info->size = 0x00200000 * (sizeof(FPW)/2);
		break;				/* => 2 or 4 MB		*/

	case (FPW)INTEL_ID_28F320C3B:
		info->flash_id += FLASH_28F320C3B;
		info->sector_count = 71;
		info->size = 0x00400000 * (sizeof(FPW)/2);
		break;				/* => 4 or 8 MB		*/

	case (FPW)INTEL_ID_28F320B3B:
		info->flash_id += FLASH_INTEL320B;
		info->sector_count = 71;
		info->size = 0x00400000 * (sizeof(FPW)/2);
		break;				/* => 4 or 8 MB		*/

	case (FPW)INTEL_ID_28F640C3B:
		info->flash_id += FLASH_28F640C3B;
		info->sector_count = 135;
		info->size = 0x00800000 * (sizeof(FPW)/2);
		break;				/* => 8 or 16 MB	*/

	case (FPW)INTEL_ID_28F640B3B:
		info->flash_id += FLASH_INTEL640B;
		info->sector_count = 135;
		info->size = 0x00800000 * (sizeof(FPW)/2);
		break;				/* => 8 or 16 MB	*/

	default:
		info->flash_id = FLASH_UNKNOWN;
		info->sector_count = 0;
		info->size = 0;
		return (0);			/* => no or unknown flash */
	}

	flash_get_offsets((ulong)addr, info);

	/* Put FLASH back in read mode */
	flash_reset(info);

	return (info->size);
}

#ifdef CFG_FLASH_PROTECTION
/*-----------------------------------------------------------------------
 */

static void flash_sync_real_protect(flash_info_t *info)
{
    FPWV *addr = (FPWV *)(info->start[0]);
    FPWV *sect;
    int i;

    switch (info->flash_id & FLASH_TYPEMASK) {
    case FLASH_28F800C3B:
    case FLASH_28F800C3T:
    case FLASH_28F160C3B:
    case FLASH_28F160C3T:
    case FLASH_28F320C3B:
    case FLASH_28F320C3T:
    case FLASH_28F640C3B:
    case FLASH_28F640C3T:
	/* check for protected sectors */
	*addr = (FPW)0x00900090;
	for (i = 0; i < info->sector_count; i++) {
	    /* read sector protection at sector address, (A7 .. A0) = 0x02.
	     * D0 = 1 for each device if protected.
	     * If at least one device is protected the sector is marked
	     * protected, but mixed protected and  unprotected devices
	     * within a sector should never happen.
	     */
	    sect = (FPWV *)(info->start[i]);
	    info->protect[i] = (sect[2] & (FPW)(0x00010001)) ? 1 : 0;
	}

	/* Put FLASH back in read mode */
	flash_reset(info);
	break;

    case FLASH_AM640U:
    default:
	/* no hardware protect that we support */
	break;