📄 video_ad7179.h
字号:
/* * (C) Copyright 2003 Wolfgang Grandegger <wg@denx.de> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#define VIDEO_ENCODER_NAME "Analog Devices AD7179"#define VIDEO_ENCODER_I2C_RATE 100000 /* Max rate is 100Khz */#define VIDEO_ENCODER_CB_Y_CR_Y /* Use CB Y CR Y format... */#define VIDEO_MODE_YUYV /* The only mode supported by this encoder */#undef VIDEO_MODE_RGB#define VIDEO_MODE_BPP 16#ifdef VIDEO_MODE_PAL#define VIDEO_ACTIVE_COLS 720#define VIDEO_ACTIVE_ROWS 576#define VIDEO_VISIBLE_COLS 640#define VIDEO_VISIBLE_ROWS 480#else#error "NTSC mode is not supported"#endifstatic unsigned char video_encoder_data[] = { 0x05, /* Mode Register 0 */ 0x11, /* Mode Register 1 */ 0x20, /* Mode Register 2 */ 0x0C, /* Mode Register 3 */ 0x01, /* Mode Register 4 */ 0x00, /* Reserved */ 0x00, /* Reserved */ 0x04, /* Timing Register 0 */ 0x00, /* Timing Register 1 */ 0xCB, /* Subcarrier Frequency Register 0 */ 0x0A, /* Subcarrier Frequency Register 1 */ 0x09, /* Subcarrier Frequency Register 2 */ 0x2A, /* Subcarrier Frequency Register 3 */ 0x00, /* Subcarrier Phase */ 0x00, /* Closed Captioning Ext Reg 0 */ 0x00, /* Closed Captioning Ext Reg 1 */ 0x00, /* Closed Captioning Reg 0 */ 0x00, /* Closed Captioning Reg 1 */ 0x00, /* Pedestal Control Reg 0 */ 0x00, /* Pedestal Control Reg 1 */ 0x00, /* Pedestal Control Reg 2 */ 0x00, /* Pedestal Control Reg 3 */ 0x00, /* CGMS_WSS Reg 0 */ 0x00, /* CGMS_WSS Reg 0 */ 0x00, /* CGMS_WSS Reg 0 */ 0x00 /* Teletext Req. Control Reg */} ;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -