tda7313id.h

iic_at24c03_lc72131_redio用于FM

	dprintk("mt2032 optimize_vco: sel=%d\n",sel);

	buf[0]=0x0f;
	buf[1]=sel;
        i2c_master_send(c,buf,2);
	lock=mt2032_check_lo_lock(c);
	return lock;
}


static void mt2032_set_if_freq(struct i2c_client *c,int rfin, int if1, int if2, int from, int to)
{
	unsigned char buf[21];
	int lint_try,ret,sel,lock=0;
	struct tuner *t = (struct tuner*)c->data;

	dprintk("mt2032_set_if_freq rfin=%d if1=%d if2=%d from=%d to=%d\n",rfin,if1,if2,from,to);

        buf[0]=0;
        ret=i2c_master_send(c,buf,1);
        i2c_master_recv(c,buf,21);

	buf[0]=0;
	ret=mt2032_compute_freq(rfin,if1,if2,from,to,&buf[1],&sel,t->xogc);
	if (ret<0)
		return;

        // send only the relevant registers per Rev. 1.2
        buf[0]=0;
        ret=i2c_master_send(c,buf,4);
        buf[5]=5;
        ret=i2c_master_send(c,buf+5,4);
        buf[11]=11;
        ret=i2c_master_send(c,buf+11,3);
        if(ret!=3)
                printk("mt2032_set_if_freq failed with %d\n",ret);

	// wait for PLLs to lock (per manual), retry LINT if not.
	for(lint_try=0; lint_try<2; lint_try++) {
		lock=mt2032_check_lo_lock(c);

		if(optimize_vco)
			lock=mt2032_optimize_vco(c,sel,lock);
		if(lock==6) break;

		printk("mt2032: re-init PLLs by LINT\n");
		buf[0]=7;
		buf[1]=0x80 +8+t->xogc; // set LINT to re-init PLLs
		i2c_master_send(c,buf,2);
		mdelay(10);
		buf[1]=8+t->xogc;
		i2c_master_send(c,buf,2);
        }

	if (lock!=6)
		printk("MT2032 Fatal Error: PLLs didn't lock.\n");

	buf[0]=2;
	buf[1]=0x20; // LOGC for optimal phase noise
	ret=i2c_master_send(c,buf,2);
	if (ret!=2)
		printk("mt2032_set_if_freq2 failed with %d\n",ret);
}


static void mt2032_set_tv_freq(struct i2c_client *c, int freq, int norm)
{
	int if2,from,to;

	// signal bandwidth and picture carrier
	if(norm==VIDEO_MODE_NTSC) {
		from=40750*1000;
		to=46750*1000;
		if2=45750*1000;
	}
	else {  // Pal
		from=32900*1000;
		to=39900*1000;
		if2=38900*1000;
	}

        mt2032_set_if_freq(c,freq* 1000*1000/16, 1090*1000*1000, if2, from, to);
}


// Set tuner frequency,  freq in Units of 62.5kHz = 1/16MHz
static void set_tv_freq(struct i2c_client *c, int freq)
{
	u8 config;
	u16 div;
	struct tunertype *tun;
	struct tuner *t = c->data;
        unsigned char buffer[4];
//	int rc;

	if (t->type == -1) {
		printk("tuner: tuner type not set\n");
		return;
	}
	if (t->type == TUNER_MT2032) {
		mt2032_set_tv_freq(c,freq,t->mode);
		return;
	}

	if (freq < tv_range[0]*16 || freq > tv_range[1]*16) {
		/* FIXME: better do that chip-specific, but
		   right now we don't have that in the config
		   struct and this way is still better than no
		   check at all */
		printk("tuner: TV freq (%d.%02d) out of range (%d-%d)\n",
		       freq/16,freq%16*100/16,tv_range[0],tv_range[1]);
		return;
	}

	tun=&tuners[t->type];
	if (freq < tun->thresh1)
		config = tun->VHF_L;
	else if (freq < tun->thresh2)
		config = tun->VHF_H;
	else
		config = tun->UHF;


	/* tv norm specific stuff for multi-norm tuners */
	switch (t->type) {
	case TUNER_PHILIPS_SECAM: // FI1216MF
		/* 0x01 -> ??? no change ??? */
		/* 0x02 -> PAL BDGHI / SECAM L */
		/* 0x04 -> ??? PAL others / SECAM others ??? */
		config &= ~0x02;
		if (t->mode == VIDEO_MODE_SECAM)
			config |= 0x02;
		break;

	case TUNER_TEMIC_4046FM5:
		config &= ~0x0f;
		switch (pal[0]) {
		case 'i':
		case 'I':
			config |= TEMIC_SET_PAL_I;
			break;
		case 'd':
		case 'D':
			config |= TEMIC_SET_PAL_DK;
			break;
		case 'l':
		case 'L':
			config |= TEMIC_SET_PAL_L;
			break;
		case 'b':
		case 'B':
		case 'g':
		case 'G':
		default:
			config |= TEMIC_SET_PAL_BG;
			break;
		}
		break;

	case TUNER_PHILIPS_FQ1216ME:
		config &= ~0x0f;
		switch (pal[0]) {
		case 'i':
		case 'I':
			config |= PHILIPS_SET_PAL_I;
			break;
		case 'l':
		case 'L':
			config |= PHILIPS_SET_PAL_L;
			break;
		case 'd':
		case 'D':
		case 'b':
		case 'B':
		case 'g':
		case 'G':
			config |= PHILIPS_SET_PAL_BGDK;
			break;
		}
		break;
	}


	/*
	 * Philips FI1216MK2 remark from specification :
	 * for channel selection involving band switching, and to ensure
	 * smooth tuning to the desired channel without causing
	 * unnecessary charge pump action, it is recommended to consider
	 * the difference between wanted channel frequency and the
	 * current channel frequency.  Unnecessary charge pump action
	 * will result in very low tuning voltage which may drive the
	 * oscillator to extreme conditions.
	 *
	 * Progfou: specification says to send config data before
	 * frequency in case (wanted frequency < current frequency).
	 */

	div=freq + tun->IFPCoff;
	if (t->type == TUNER_PHILIPS_SECAM && freq < t->freq) {
		buffer[0] = tun->config;
		buffer[1] = config;
		buffer[2] = (div>>8) & 0x7f;
		buffer[3] = div      & 0xff;
	} else {
		buffer[0] = (div>>8) & 0x7f;
		buffer[1] = div      & 0xff;
		buffer[2] = tun->config;
		buffer[3] = config;
	}
	dprintk("tuner: tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
		buffer[0],buffer[1],buffer[2],buffer[3]);

	if (i2c_smbus_write_byte_data(c, buffer[0], buffer[1]) < 0)
		printk("tuner: smbus write error\n");
	if (i2c_smbus_write_byte_data(c, buffer[2], buffer[3]) < 0)
		printk("tuner: smbus write error\n");

//        if (4 != (rc = i2c_master_send(c,buffer,4)))
//                printk("tuner: i2c i/o error: rc == %d (should be 4)\n",rc);

}

static void mt2032_set_radio_freq(struct i2c_client *c,int freq)
{
        int if2;

        if2=10700*1000; //  10.7MHz FM intermediate frequency

	// per Manual for FM tuning: first if center freq. 1085 MHz
        mt2032_set_if_freq(c,freq* 1000*1000/16, 1085*1000*1000,if2,if2,if2);
}

static void set_radio_freq(struct i2c_client *c, int freq)
{
	struct tunertype *tun;
	struct tuner *t = (struct tuner*)c->data;
        unsigned char buffer[4];
	int /*rc,*/ div;

	if (freq < radio_range[0]*16 || freq > radio_range[1]*16) {
		printk("tuner: radio freq (%d.%02d) out of range (%d-%d)\n",
		       freq/16,freq%16*100/16,
		       radio_range[0],radio_range[1]);
		return;
	}
	if (t->type == -1) {
		printk("tuner: tuner type not set\n");
		return;
	}

        if (t->type == TUNER_MT2032) {
                mt2032_set_radio_freq(c,freq);
		return;
	}

	tun=&tuners[t->type];
	div = freq + (int)(16*10.7);
        buffer[0] = (div>>8) & 0x7f;
        buffer[1] = div      & 0xff;
	buffer[2] = tun->config;
	switch (t->type) {
	case TUNER_PHILIPS_FM1216ME_MK3:
		buffer[3] = 0x19;
		break;
	default:
		buffer[3] = 0xa4;
		break;
	}

	dprintk("tuner: radio 0x%02x 0x%02x 0x%02x 0x%02x\n",
		buffer[0],buffer[1],buffer[2],buffer[3]);

	if (i2c_smbus_write_byte_data(c, buffer[0], buffer[1]) < 0)
		printk("tuner: smbus write error\n");
	if (i2c_smbus_write_byte_data(c, buffer[2], buffer[3]) < 0)
		printk("tuner: smbus write error\n");
}

/* ---------------------------------------------------------------------- */

static int tuner_attach(struct i2c_adapter *adap, int addr,
			unsigned short flags, int kind)
{
	struct tuner *t;
	struct i2c_client *client;

	if (this_adap > 0)
		return -1;
	this_adap++;

        client_template.adapter = adap;
        client_template.addr = addr;

        printk("tuner: chip found @ 0x%x\n", addr<<1);

        if (NULL == (client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
                return -ENOMEM;
        memcpy(client,&client_template,sizeof(struct i2c_client));
        client->data = t = kmalloc(sizeof(struct tuner),GFP_KERNEL);
        if (NULL == t) {
                kfree(client);
                return -ENOMEM;
        }
        memset(t,0,sizeof(struct tuner));
	if (type >= 0 && type < TUNERS) {
		t->type = type;
		printk("tuner(bttv): type forced to %d (%s) [insmod]\n",t->type,tuners[t->type].name);
		strncpy(client->name, tuners[t->type].name, sizeof(client->name));
	} else {
		t->type = -1;
	}
        i2c_attach_client(client);
        if (t->type == TUNER_MT2032)
                 mt2032_init(client);

	MOD_INC_USE_COUNT;
	return 0;
}

static int tuner_probe(struct i2c_adapter *adap)
{
	int rc;

	if (0 != addr) {
		normal_i2c_range[0] = addr;
		normal_i2c_range[1] = addr;
	}
	this_adap = 0;

	switch (adap->id) {
	case I2C_ALGO_BIT | I2C_HW_B_BT848:
	case I2C_ALGO_BIT | I2C_HW_B_RIVA:
	case I2C_ALGO_SAA7134:
	case I2C_ALGO_SAA7146:
	case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511:
		printk("tuner: probing %s i2c adapter [id=0x%x]\n",
		       adap->name,adap->id);
		rc = i2c_probe(adap, &addr_data, tuner_attach);
		break;
	default:
		printk("tuner: ignoring %s i2c adapter [id=0x%x]\n",
		       adap->name,adap->id);
		rc = 0;
		/* nothing */
	}
	printk("DEBUG: tuner_probe returning %d\n", rc);
	return rc;
}

static int tuner_detach(struct i2c_client *client)
{
	struct tuner *t = (struct tuner*)client->data;

	i2c_detach_client(client);
	kfree(t);
	kfree(client);
	MOD_DEC_USE_COUNT;
	return 0;
}

static int
tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
	struct tuner *t = (struct tuner*)client->data;
        int   *iarg = (int*)arg;
#if 0
        __u16 *sarg = (__u16*)arg;
#endif

        switch (cmd) {

	/* --- configuration --- */
	case TUNER_SET_TYPE:
		if (t->type != -1) {
			printk("tuner: type already set (%d)\n",t->type);
			return 0;
		}
		if (*iarg < 0 || *iarg >= TUNERS)
			return 0;
		t->type = *iarg;
		printk("tuner: type set to %d (%s)\n",
                        t->type,tuners[t->type].name);
		strncpy(client->name, tuners[t->type].name, sizeof(client->name));
		if (t->type == TUNER_MT2032)
                        mt2032_init(client);
		break;
	case AUDC_SET_RADIO:
		t->radio = 1;
		break;

	/* --- v4l ioctls --- */
	/* take care: bttv does userspace copying, we'll get a
	   kernel pointer here... */
	case VIDIOCSCHAN:
	{
		struct video_channel *vc = arg;

		t->radio = 0;
		t->mode = vc->norm;
		if (t->freq)
			set_tv_freq(client,t->freq);
		return 0;
	}
	case VIDIOCSFREQ:
	{
		unsigned long *v = arg;

		if (t->radio) {
			dprintk("tuner: radio freq set to %d.%02d\n",
				(*iarg)/16,(*iarg)%16*100/16);
			set_radio_freq(client,*v);
		} else {
			dprintk("tuner: tv freq set to %d.%02d\n",
				(*iarg)/16,(*iarg)%16*100/16);
			set_tv_freq(client,*v);
		}
		t->freq = *v;
		return 0;
	}
	case VIDIOCGTUNER:
	{
		struct video_tuner *vt = arg;

		if (t->radio)
			vt->signal = tuner_signal(client);
		return 0;
	}
	case VIDIOCGAUDIO:
	{
		struct video_audio *va = arg;
		if (t->radio)
			va->mode = (tuner_stereo(client) ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO);
		return 0;
	}

#if 0
	/* --- old, obsolete interface --- */
	case TUNER_SET_TVFREQ:
		dprintk("tuner: tv freq set to %d.%02d\n",
			(*iarg)/16,(*iarg)%16*100/16);
		set_tv_freq(client,*iarg);
		t->radio = 0;
		t->freq = *iarg;
		break;

	case TUNER_SET_RADIOFREQ:
		dprintk("tuner: radio freq set to %d.%02d\n",
			(*iarg)/16,(*iarg)%16*100/16);
		set_radio_freq(client,*iarg);
		t->radio = 1;
		t->freq = *iarg;
		break;
	case TUNER_SET_MODE:
		if (t->type != TUNER_PHILIPS_SECAM) {
			dprintk("tuner: trying to change mode for other than TUNER_PHILIPS_SECAM\n");
		} else {
			int mode=(*sarg==VIDEO_MODE_SECAM)?1:0;
			dprintk("tuner: mode set to %d\n", *sarg);
			t->mode = mode;
			set_tv_freq(client,t->freq);
		}
		break;
#endif
	default:
		/* nothing */
		break;
	}

	return 0;
}

/* ----------------------------------------------------------------------- */

static struct i2c_driver driver = {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 0)
	.owner          = THIS_MODULE,
#endif
        .name           = "i2c TV tuner driver",
        .id             = I2C_DRIVERID_TUNER,
        .flags          = I2C_DF_NOTIFY,
        .attach_adapter = tuner_probe,
        .detach_client  = tuner_detach,
        .command        = tuner_command,
};
static struct i2c_client client_template =
{
        .name   = "(tuner unset)",
	.flags  = I2C_CLIENT_ALLOW_USE,
        .driver = &driver,
};

static int tuner_init_module(void)
{
	i2c_add_driver(&driver);
	return 0;
}

static void tuner_cleanup_module(void)
{
	i2c_del_driver(&driver);
}

module_init(tuner_init_module);
module_exit(tuner_cleanup_module);

/*
 * Overrides for Emacs so that we follow Linus's tabbing style.
 * ---------------------------------------------------------------------------
 * Local variables:
 * c-basic-offset: 8
 * End:
 */