103_ini.c

南瑞继保串口103源码共享

#include "dev_mng.h"
#include "x103.h"

/*   串口设置   */
BYTE  uart_port = UART_PORT_A;

/* 设备类型定义 */
#define D_PSL_600	0xb2
#define D_PSL_640	0xc8
#define D_PSR_652	0x01
#define D_PSP_640	0xc9
#define D_PSC_640	0xca

T_IED g_ied_list[] =
{
	{1,  x103_service, 200,	0,	{172,20,10,1,1,21}},  //1号进线保护
	{2,  x103_service, 200,	0,	{172,20,10,2,1,22}},  //2号进线保护
	{3,  x103_service, 200,	0,	{172,20,10,3,1,23}},  //10KV母联保护
	{4,  x103_service, 203,	0,	{172,20,10,4,1,24}},  //电容器保护
	{5,  x103_service, 201,	0,	{172,20,10,5,1,25}},  //10备自投
	{6,  x103_service, 202,	0,	{172,20,10,6,1,26}},  //1号厂变保护
	{7,  x103_service, 202,	0,	{172,20,10,7,1,27}},  //2号厂变保护
	{8,  x103_service, 202,	0,	{172,20,10,8,1,28}},  //除尘变保护
	{9,  x103_service, 202,	0,	{172,20,10,9,1,29}},  //备用变保护
	{10,  x103_service, 204,	0,	{172,20,11,1,1,30}},//1号炉一次风机
	{11,  x103_service, 204,	0,	{172,20,11,2,1,31}},//1号炉二次风机
	{12,  x103_service, 204,	0,	{172,20,11,3,1,32}},//1号炉引风机
	{13,  x103_service, 204,	0,	{172,20,11,4,1,33}},//1号炉给水泵
	{14,  x103_service, 204,	0,	{172,20,11,5,1,34}},//2号炉一次风机
	{15,  x103_service, 204,	0,	{172,20,11,6,1,35}},//2号炉二次风机
	{16,  x103_service, 204,	0,	{172,20,11,7,1,36}},//2号炉引风机
	{17,  x103_service, 204,	0,	{172,20,11,8,1,37}},//2号炉给水泵
	{18,  x103_service, 1,	0,	{172,20,12,1,1,38}},//400V开出量1
	{19,  x103_service, 1,	0,	{172,20,12,1,2,39}},//400VI开入量3
	{20,  x103_service, 1,	0,	{172,20,12,1,3,40}},//400VI开入量2
	{21,  x103_service, 1,	0,	{172,20,12,1,4,41}},//400VI开入量1
	{22,  x103_service, 1,	0,	{172,20,12,1,9,42}},//除尘段电压遥测
	{23,  x103_service, 1,	0,	{172,20,12,1,11,43}},//400V I段电压遥测
	{24,  x103_service, 1,	0,	{172,20,12,2,1,44}},//400V开出量2
	{25,  x103_service, 1,	0,	{172,20,12,2,2,45}},//400VII开入量3
	{26,  x103_service, 1,	0,	{172,20,12,2,3,46}},//400VII开入量2
	{27,  x103_service, 1,	0,	{172,20,12,2,4,47}},//400VII开入量1
	{28,  x103_service, 1,	0,	{172,20,12,2,11,48}},//400V II段电压遥测
	//{29,  x103_service, 178,	0,	{172,20,2,230,1,49}},//直流系统
	//{30,  x103_service, 178,	0,	{172,20,2,230,6,50}},//直流系统II
	//{31,  x103_service, 178,	0,	{172,20,251,1,3,3}},
};

WORD g_ied_num =sizeof(g_ied_list)/sizeof(T_IED);

BOOL IED_Initialize()
{
	return DEV_Create_IED(g_ied_list, g_ied_num);
}