mx21_rtc.h

MX21_InitCodeLib.rar freescale mx21系列ARM芯片9328的WINCE5.0下初始化代码

/**********************************************************************
*
*         (C) COPYRIGHT 2004 FREESCALE, INC.
*         ALL RIGHTS RESERVED
*
*
*     Group/Division:  WMSG/MMDO
*
*     Description:
*
*     Related Specifications:
*
*     Errata:
*
*     File Name:        MX21_RTC.h
*     Revision Number:  0.1
*     Author(s):        Sharad Kumar
*     Date created:     30Apr2004
*     Revision History:
*        Date      Rev     Description
*        ----      ---     -----------
*        30Apr04  0.1     First draft
*
**********************************************************************/
#ifndef _MX21_RTC_H
#define _MX21_RTC_H

#include "MX21_MemMap.h"
#include "MX21_Macros.h"
#include "MX21_DataTypes.h"
#include "MX21_Common.h"

/********************************************************************
M A C R O S
*********************************************************************/
#define RTC_SWR_SET     0x1        // software reset bit
#define RTC_ENABLE      0x1        // enable bit
#define RTC_DISABLE     0x0        // disable bit

// typdef for RTC interrupts
typedef enum 
{
	RTC_SAM7  = 15,	 
	RTC_SAM6  = 14,	 
	RTC_SAM5  = 13,	 
	RTC_SAM4  = 12,	 
	RTC_SAM3  = 11,	 
	RTC_SAM2  = 10,	 
	RTC_SAM1   = 9,
	RTC_SAM0  = 8,
	RTC_2HZ   = 7, 
	RTC_HR    = 5,
	RTC_1HZ   = 4,
	RTC_DAY   = 3,
	RTC_ALM   = 2,
	RTC_MIN   = 1,  
	RTC_SW    = 0,
	RTC_VEC   = 32
} rtc_int_type;

/********************************************************************
R T C     F U N C T I O N S
*********************************************************************/

//---------------------------------------------------
// issue a soft reset to the RTC by writing the 
// SWR bit of the RTC control register to 1
//---------------------------------------------------
void 
Rtc_SoftReset(void);


//---------------------------------------------------
// enable the RTC by writing a 1 to the EN 
// bit of the RTC control register
//---------------------------------------------------
void 
Rtc_Enable(void);


//---------------------------------------------------
// disable the RTC by writing a 0 to the EN 
// bit of the RTC control register
//---------------------------------------------------
void 
Rtc_Disable(void);


//---------------------------------------------------
// select the proper crystal frequency by 
// writing to the XTL bits. Specify:
// 0x0, 0x60 for 32.768 Khz, 
// 0x40 for 32 Khz
// 0x60 for 32.768 Khz
//---------------------------------------------------
void 
Rtc_SetXTLBits(uint32_t);          // bits specify the crystal 
                                   // frequency in Hertz

//---------------------------------------------------
// set time of day by specifying
// days, hours, mins, and seconds
//---------------------------------------------------
void 
Rtc_SetTime(uint32_t,              // days
            uint32_t,              // hours
            uint32_t,              // mins            
            uint32_t);             // seconds


//---------------------------------------------------
// set the RTC stop watch counter
//---------------------------------------------------
void
Rtc_SetStpwch(uint32_t);           // stop watch count
                                   // in half minutes


//---------------------------------------------------
// set the alarm by specifying the 
// time of alarm in days, hours,mins, seconds
// in a 32 bit register format
//---------------------------------------------------
void 
Rtc_SetAlarm(uint32_t,             // alarm day
             uint32_t,             // alarm hours
             uint32_t,             // alarm minutes             
             uint32_t);            // alarm seconds


//---------------------------------------------------
// enable a selected interrupt type
//---------------------------------------------------
void
Rtc_EnableInterrupts(rtc_int_type,  // interrupt type
                    uint32_t);      // interrupt vector

//---------------------------------------------------
// disble a selected interrupt type
//---------------------------------------------------
void
Rtc_DisInterrupts(rtc_int_type,     // interrupt type
                  uint32_t);        // interrupt vector


//---------------------------------------------------
// check status of selected interrupt                
//---------------------------------------------------                          
uint32_t                            // status, legal= {0,1}
Rtc_ChkIntStatus(rtc_int_type);     // interrupt type


//---------------------------------------------------
// clear the selected interrupt
//---------------------------------------------------
void
Rtc_ClrIntStatus(rtc_int_type);    // interrupt type


//---------------------------------------------------
// sample MX21 initialization routine 
// to setup the real time clock.
//---------------------------------------------------
void Rtc_setup(uint32_t,           // rtc day
               uint32_t,           // rtc hrs
               uint32_t,		   // rtc mins
               uint32_t,           // rtc secs
               uint32_t,           // alarm day
               uint32_t,           // alarm hrs
               uint32_t,		   // alram mins
               uint32_t,           // alarm seconds
               uint32_t,           // stop watch time
               rtc_int_type,       // rtc interrupt type 
               uint32_t            // interrupt reg vector
              );

//---------------------------------------------------
// in this example the RTC interrupt type is specified to be 
// of type SAM0. If multiple interrupts need to be simultaneously
// enabled, chose an int of type RTC_VEC for interrupt type, and
// specify the 32 bit enable vector in the vector field.
//---------------------------------------------------

void
rtc_demo();

#endif