target.c

包括使用ucos任务的一些操作实现了lpc2142上的一些基本功能：按键、流水灯

/****************************************Copyright (c)**************************************************
**                               Guangzou ZLG-MCU Development Co.,LTD.
**                                      graduate school
**                                 http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name:			target.c
** Last modified Date:	2004-09-17
** Last Version:		1.0
** Descriptions:		header file of the specific codes for LPC2100 target boards
**						Every project should include a copy of this file, user may modify it as needed
**------------------------------------------------------------------------------------------------------
** Created by:			Chenmingji
** Created date:		2004-02-02
** Version:				1.0
** Descriptions:		The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by:			Chenmingji
** Modified date:		2004-09-17
** Version:				1.01
** Descriptions:		Renewed the template, added more compiler supports 
**
**------------------------------------------------------------------------------------------------------
** Modified by: 
** Modified date:
** Version:	
** Descriptions: 
**
********************************************************************************************************/

#define IN_TARGET

#include "config.h"
#include "common.h"


 


/*********************************************************************************************************
** Function name:			TargetInit
**
** Descriptions:			Initialize the target board; it is called in a necessary place, change it as 
**							needed
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void TargetInit(void)

{	RTCTIME set_rtctime;
	set_rtctime.year=	2008;
	set_rtctime.mon	=	1;
	set_rtctime.dom	=	1;
	set_rtctime.dow	=	2;
	set_rtctime.hour=	16;
	set_rtctime.min	=	59;
	set_rtctime.sec	=	59;	

    OS_ENTER_CRITICAL();
    srand((uint32) TargetInit);
	PllVpb_Ini();								//初始化PLL
    VICInit();
    Timer0Init();
	RTC_Ini(set_rtctime);						//RTC初始化
	T1_Ini();									//T1初始化
	Uart1_Ini(9600);							//uart1初始化
	Uart0_Ini(9600);							//uart1初始化	
	Adc0_Ini();									//ADC初始化
	//DAC_Ini();									//初始化DAC
	IO_Ini();								   	//IO口初始化；


    OS_EXIT_CRITICAL();
}
/*********************************************************************************************************
** Function name:			InitialiseUART0
**
** Descriptions:			Initialize the Uart0
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
        void InitialiseUART0(uint32 bps)
{  	
    uint16 Fdiv;
    
    PINSEL0 = (PINSEL0 & 0xfffffff0) | 0x05;    /* Select the pins for Uart 选择管脚为UART0 */

    U0LCR = 0x80;                               /* Enable to access the frequenc regecter 允许访问分频因子寄存器 */
    Fdiv = (Fpclk / 16) / bps;                  /* Set the baudrate设置波特率 */
    U0DLM = Fdiv / 256;							
	U0DLL = Fdiv % 256;						
    U0LCR = 0x03;                               /* Disable to access the frequenc regecter 禁止访问分频因子寄存器 */
                                                /* set to 8,1,n 且设置为8,1,n */
	U0IER = 0x00;                               /* Disable interrupt禁止中断 */
    U0FCR = 0x00;                               /* initial FIFO 初始化FIFO */
} 
/*********************************************************************************************************
** Function name:			TargetResetInit
**
** Descriptions:			Initialize the target 
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
        void TargetResetInit(void)
{
#ifdef __DEBUG_RAM    
    MEMMAP = 0x2;                   //remap
#endif

#ifdef __DEBUG_FLASH    
    MEMMAP = 0x1;                   //remap
#endif

#ifdef __IN_CHIP    
    MEMMAP = 0x1;                   //remap
#endif

    PINSEL0 = (PINSEL0 & 0xFFFF0000) | 0x05 | 0x50;

/* 设置系统各部分时钟 */
/* Set system timers for each component */
    PLLCON = 1;
#if (Fpclk / (Fcclk / 4)) == 1
    VPBDIV = 0;
#endif
#if (Fpclk / (Fcclk / 4)) == 2
    VPBDIV = 2;
#endif
#if (Fpclk / (Fcclk / 4)) == 4
    VPBDIV = 1;
#endif

#if (Fcco / Fcclk) == 2
    PLLCFG = ((Fcclk / Fosc) - 1) | (0 << 5);
#endif
#if (Fcco / Fcclk) == 4
    PLLCFG = ((Fcclk / Fosc) - 1) | (1 << 5);
#endif
#if (Fcco / Fcclk) == 8
    PLLCFG = ((Fcclk / Fosc) - 1) | (2 << 5);
#endif
#if (Fcco / Fcclk) == 16
    PLLCFG = ((Fcclk / Fosc) - 1) | (3 << 5);
#endif
    PLLFEED = 0xaa;
    PLLFEED = 0x55;
    while((PLLSTAT & (1 << 10)) == 0);
    PLLCON = 3;
    PLLFEED = 0xaa;
    PLLFEED = 0x55;

/* 设置存储器加速模块 */
/* Set memory accelerater module*/
    MAMCR = 0;
#if Fcclk < 20000000
    MAMTIM = 1;
#else
#if Fcclk < 40000000
    MAMTIM = 2;
#else
    MAMTIM = 3;
#endif
#endif
    MAMCR = 2;

/* 设置串行口 */
/* initialize UART*/
    InitialiseUART0(115200);

/* 设置实时时钟 */
/* initialize RTC*/
    CCR = 1;
    PREINT = Fpclk / 32768 - 1;
    PREFRAC = Fpclk - (Fpclk / 32768) * 32768;
    YEAR = 2003;
    MONTH = 6;
    DOM = 2;
    
/* initialize VIC*/
    VICIntEnClr = 0xffffffff;
    VICVectAddr = 0;
    VICIntSelect = 0;
    T0IR = 0xffffffff;
    T0TCR = 0X02;
}


/*********************************************************************************************************
**                            End Of File
********************************************************************************************************/