minimos.tp

U盘控制器USB97C223的固件代码,对2kPAGE NAND FLASH 有很好的支持.

0 0 sys "<-- TRACE FIFO OVERFLOW"
1 0 isr "knl_initialize_interrupts()"
2 1 isr "(@%d isr0)"
3 0 isr "-(kbm_isr0_rxpkt)"
4 0 isr "usbrx bad crc"
5 0 isr "usbrx bad tog"
6 0 isr "-(kbm_isr0_txpkt)"
7 0 isr "-(kbm_isr0_isadma)"
8 0 isr "--(k_irq_isa_irq3)"
9 0 isr "--(k_irq_isa_irq2)"
10 0 isr "--(k_irq_isa_irq1)"
11 0 isr "--(k_irq_isa_irq0)"
12 0 isr "(suspendirq - off frame counter and timer0)"
13 0 isr "(suspendirq - off frame counter and timer0)"
14 0 isr "(pwrmngirq: usbrstirq)"
15 0 isr "(pwrmngirq: resume ==> HUB)"
16 0 isr "(pwrmngirq: resume ==> PORT)"
17 0 isr "(pwrmngirq: resume (hub bypass))"
18 0 isr "(pwrmngirq: resume)"
19 0 isr "(pwrmngirq: suspend ==> HUB)"
20 0 isr "(pwrmngirq: suspend ==> PORT)"
21 0 isr "(pwrmngirq: suspend (hub bypass))"
22 0 isr "(pwrmngirq: suspend)"
23 1 isr "(@%d isr2)"
24 2 isr "irq_control(intr:%d, operation:%02X)"
25 3 isr "error: k_irq_control[%d].%d != %d"
26 1 isr "intr:%d"
27 0 isr "clear then unmask"
28 0 isr "mask then clear"
29 0 isr "unmask only"
30 0 isr "mask only"
31 0 isr "clear only"
32 0 isr "knl_initialize_interrupts()"
33 0 isr "(cfc_stat_irq)"
34 0 isr "(smc_stat_irq)"
35 0 isr "(msc_stat_irq)"
36 0 isr "(sdc_stat_irq)"
37 0 isr "(usb_error_irq)"
38 1 isr "(@%d usbstatirq)"
39 0 isr "(kbm_usb_stat_reset - vbus is present, so this is probably a legitimate reset"
40 0 isr "(kbm_usb_stat_reset - vbus is absent, so this cannot possibly be a legitimate reset"
41 1 isr "(@%d isr0)"
42 1 isr "ramwrA - g_endpoint[2].rxpnr:%02X"
43 0 isr "deliver abort sync on setup while configured"
44 0 isr "(filtering out a false false k_irq_ramrd_b)"
45 0 isr "interrupt because buffer B was transmitted"
46 0 isr "(filtering out a false false k_irq_ramrd_a)"
47 0 isr "interrupt because buffer A was transmitted"
48 1 isr "ramwrB - g_endpoint[2].rxpnr:%02X"
49 1 isr "(@%d isr2)"
50 0 isr "got ZLP on ep0"
51 0 isr "-(kbm_isr1_ep0rx)"
52 0 isr "--(deliver kbm_sync_usbrx)"
53 0 isr "-(k_irq_usb_ep0tx)"
54 0 isr "-(kbm_isr1_suspend)"
55 0 isr "(kbm_isr1_suspend - vbus is present, so this is probably a legitimate suspend"
56 0 isr "(kbm_isr1_suspend - vbus is absent, so this isn't considered a legitimate suspend"
57 2 isr "(crd_stat_irq x_crd_stat:%02X x_crd_stat_msk:%02X)"
58 1 isr "(crd_stat_irq clearing:0x%02X)"
59 2 isr "(crd_stat_irq x_crd_stat:%02X x_crd_stat_msk:%02X)"
60 1 isr "(crd_stat_irq masking:0x%02X)"
61 2 isr "(crd_stat_irq x_crd_stat:%02X x_crd_stat_msk:%02X)"
62 2 isr "(crd_stat_irq x_crd_ps:0x%02X shdw:0x%02X)"
63 1 isr "(@%d isr8)"
64 0 isr "--(k_irq_crd_sts_chg)"
65 0 isr "--(k_irq_fmc_err)"
66 0 isr "--(kbm_wk1_ext_int)"
67 0 isr "(kbm_wk1_usb_reset - vbus is present, so this is probably a legitimate reset"
68 0 isr "(kbm_wk1_usb_reset - vbus is absent, so this cannot possibly be a legitimate reset"
69 0 isr "(kbm_wk1_resume - vbus is present, so this is probably a legitimate resume"
70 0 isr "(kbm_wk1_resume - vbus is absent, so this cannot possibly be a legitimate resume"
71 1 isr "(@%d isr9)"
72 1 isr "(@%d isr10)"
73 0 isr "--(k_irq_gpio3)"
74 0 isr "---(vbus present, attaching to bus in the isr)"
75 0 isr "---(vbus gone - detaching from bus, deliver abort sync)"
76 0 isr "---(vbus gone - set suspend flags)"
77 1 isr "(@%d isr11)"