📄 ybmain.c
字号:
//系统头文件
//#pragma compact
//#include "reg52.h"
#include "intrins.h"
#include "absacc.h"
#include"local.h"
//#deifne TSTEST
#define TT
#ifdef TT
/////////////////////////////////////////////////////////////
//定义临时变量；
//unsigned char i;
/////////////////////////////////////////////////////////////
//重量信息
long idata G_Weight; //重量
unsigned char idata G_WeiShu;//小数点位数（0-5）
void ReadWeiShu(); //读分度
void SaveWeiShu(); //保存分度；
void InitWeiShu(); //初始化分度；
//bit G_LessZero; //1表示小于0
long idata G_Full; //满量程；
bit idata IsFull;
void ReadFull(); //读满量程；
void SaveFull(); //保满量程；
void InitFull(); //初满量程；
/////////////////////////////////////////////////////////////
//称重记录；
unsigned int gRecADD;//记录地址；初始地址为0x0030;
unsigned int gRecNum;//记录的数量；初始为0；
void ReadRecADD(); //读记录地址
void SaveRecADD(); //保存记录地址
void InitRecADD(); //初始化记录地址
unsigned char idata gCarRec[3]; //车号
void SetCarRec(unsigned char *dc); //由数组dc得到gCarRec
void GetCarRecDisCode(unsigned char *dc);//由gCarRec得到数组dc
unsigned char idata gHuoRec; //货号
void SetHuoRec(unsigned char *dc);//由数组dc得到gHuoRec
void GetHuoRecDisCode(unsigned char *dc);//由货号得到数组；
void Bit3_Char6(unsigned char *bBit,unsigned char* tchar); //拆散
void Char6_Bit3(unsigned char* tchar,unsigned char *bBit); //合并；
unsigned long idata gPiW; //皮重；
unsigned long idata gMaow; //毛重；
unsigned long idata gJingW; //净重；
unsigned char idata gTime[7]; //称重时间
unsigned char idata gbSaveOK; //存贮完成；
unsigned char GetSaveOk(unsigned int nrec);//得到第nrec条记录的存贮标志；
void SaveCurRec(); //保存当前记录；
void ReadRec(unsigned int nRec);//读记录到内存；
void SaveToRecNum(unsigned int nRec);//保存当前称重信息到nRec;
unsigned int GetPiW_Car(unsigned long *p,unsigned char *nCar);
/////////////////////////////////////////////////////////////
//参数设定所用到的全局变量
//对应函数SetParam()
unsigned char idata Bding_pass[6]; //标定、设置密码,初始值8888888
void ReadPass(); //读密码；
void WritePass(); //写密码
void InitPass();
#define PASSADR 0x01; //密码地址；
unsigned char idata G_FenDu; //分度值(1,2,5,10,50)
void ReadFenDu(); //读分度
void SaveFenDu(); //保存分度；
void InitFenDu(); //初始化分度；
bit idata G_FulLoad; //满量程显示标志
unsigned char idata G_Flt; //滤波强度（0-5）
void ReadFlt(); //读滤波强度
void SaveFlt(); //保滤波强度
void InitFlt(); //初始化滤波强度
unsigned char idata G_ZeroChase; //零点跟踪范围(1-0.5e ；2-1.0e ；3-1.5e；4-2.0e；5-2.5e；6-3.0e ) //e--分度值
void ReadZeroChase(); //读零点跟踪范围
void SaveZeroChase(); //保存零点跟踪范围
void InitZeroChase(); //初始化零点跟踪范围
unsigned char idata G_StartZero; //开机置0范围
unsigned int idata kjzl=0;
bit bZl=1;
void ReadStartZero(); //读开机置0范围
void SaveStartZero(); //保存开机置0范围
void InitStartZero(); //初始化开机置0范围
unsigned char idata G_SetZero; //置0键置0范围
int idata handzero; //手动置0值；
bit bHand;
void ReadSetZero(); //读置0键置0范围
void SaveSetZero(); //保置0键置0范围
void InitSetZero(); //初始化置0键置0范围
unsigned char idata G_PrintType; //打印机种类：(0-不接印机；1-24针打印机）
void ReadPrintType(); //读打印机种类
void SavePrintType(); //保存打印机种类
void InitPrintType(); //初始化打印机种类
unsigned char idata G_BuadRate; //波特率：1–600; 2–1200; 3–2400; 4–4800; 5--9600
void ReadBuadRate(); //读波特率
void SaveBuadRate(); //保存波特率
void InitBuadRate(); //初始化波特率
/////////////////////////////////////////////////////////////
//标定所用到的全局变量
//对应函数BDing()
long idata G_DynicCode; //动态内码
long idata G_hw; //重量；
long idata G_ZeroCode; //零点码 ,保存；
void ReadZeroCode(); //读零点码
void SaveZeroCode(); //保存零点码
void InitZeroCode(); //初始化零点码
float idata G_BdRate; //标率 ,保存；
unsigned int idata dtcode; //每一分度对应的码数；
void ReadBdRate(); //读标率
void SaveBdRate(); //保存标率
void InitBdRate(); //初始化标率
unsigned char idata IsBD; //是否已经标定
/////////////////////////////////////////////////////////////
//打印刷设置所用到的全局变量
//对应函数PrtSet_Key23()
unsigned char idata G_JLSet; //记录或联单打印设置：(0-4)
void ReadJLSet(); //读记录或联单打印设置
void SaveJLSet(); //保存记录或联单打印设置
void InitJLSet(); //初始化记录或联单打印设置
unsigned char idata G_PrtNum; //打印联单数：
void ReadPrtNum(); //读联单数
void SaveJPrtNum(); //保存联单数
void InitPrtNum(); //初始化联单数
unsigned char idata G_AutoPrt; //自动打印：
void ReadAutoPrt(); //读联单数
void SaveAutoPrt(); //保存联单数
void InitAutoPrt(); //初始化联单数
long G_StartPW; //自动打印起点重量：
void ReadStartPW(); //读自动打印起点重量
void SaveStartPW(); //保存自动打印起点重量
void InitStartPW(); //初始化自动打印起点重量
#endif
/////////////////////////////////////////////////////////////
//日期、时间的显示和修改函数的全局变量
//对应函数DateOp_KEY24()
void DateOp_Key24(); //日期时间设置；
//sbit ACC0 =ACC^0;
//sbit ACC7 =ACC^7;
//sbit T_CLK =P2^2; ///*实时时钟时钟线引脚
//sbit T_IO =P2^3; ///*实时时钟数据线引脚
//sbit T_RST =P2^4; ///*实时时钟复位线引脚
unsigned char ucCurtime[7];
/*
void v_RTInputByte(unsigned char ucDa);
unsigned char uc_RTOutputByte(void);
void v_W1302(unsigned char ucAddr, unsigned char ucDa);
unsigned char uc_R1302(unsigned char ucAddr);
void v_BurstW1302T(unsigned char *pSecDa);
void v_BurstR1302T(unsigned char *pSecDa);
void v_BurstW1302R(unsigned char *pReDa);
void v_BurstR1302R(unsigned char *pReDa);
void v_Set1302(unsigned char *pSecDa);
void v_Get1302(unsigned char ucCurtime[]); */
//unsigned char G_Year; //年：
//unsigned char G_Mon; //月
//unsigned char G_Day; //日
//unsigned char G_Hour; //小时
//unsigned char G_Min; //分种
#ifdef TT
unsigned char idata G_PJ; //定时关机功能；
void ReadPJ(); //读定时关机
void SavePJ(); //保存定时关机
void InitPJ(); //初始化定时关机
unsigned int idata G_TS; //天数；
void ReadTS(); //读天数
void SaveTS(); //保存天数
void InitTS(); //初始化天数
#endif
//#ifdef TSTEST
unsigned char idata G_TSY; //天数；
unsigned char idata G_TSM; //天数；
unsigned char idata G_TSD; //天数；
void ReadYMD(); //读天数
void SaveYMD(); //保存天数
void InitYMD(); //初始化天数
void DSGuangJi();
void Help();
//#endif
/////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////
// 函数名称： SendByte
// 入口参数： ndata
// 函数功能： 送出1BYTE数据
///////////////////////////////////////////////////////////////////////
void SendByte(unsigned char ndata);
void PrintCZ(unsigned char chao[],unsigned char huoHao,
unsigned long pw,unsigned long mw,
unsigned char ucCurtime[]);
///////////////////////////////////////////////////////////////////////
//初始化打印机
//////////////////////////////////////////////////////////////////////
void InitPrinter();
//#include "intrins.h"
#define uchar unsigned char
#define uint unsigned int
#define COM8155 XBYTE[0x0000]
#define PA8155 XBYTE[0x0001]
#define PB8155 XBYTE[0x0002]
#define PC8155 XBYTE[0x0003]
#ifdef TT
//自左至右位码
#define S_ADR6 0x80
#define S_ADR5 0x40
#define S_ADR4 0x20
#define S_ADR3 0x10
#define S_ADR2 0x08
#define S_ADR1 0x04
//报警器
sbit beep=P2^5;
//24C64
sbit I2C_SDA=P2^1;
sbit I2C_SCK=P2^0;
#define DATA_PRINTER P1 //P1为印数据端口
//定义各命令字
char code ascode[16]={'0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F',};
///////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////
//制表符号库
char code shu1[16]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
char code shu2[16]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
char code zuoshang[16]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,
0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,};
char code heng16[16]={0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,};
char code heng8[16]={0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,};
char code zuozhong[16]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,};
char code shangzhong[16]={0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x0F,
0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,};
char code youshang[16]={0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x0F,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
char code zhong[16]={0x08,0x08,0x08,0x08,0x08,0x08,0x08,0xFF,
0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,};
char code youzhong[16]={0x08,0x08,0x08,0x08,0x08,0x08,0x08,0xFF,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
char code xiazhong[16]={0x08,0x08,0x08,0x08,0x08,0x08,0x08,0xF8,
0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,};
char code zuoxia[16]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,
0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,};
char code youxia[16]={0x08,0x08,0x08,0x08,0x08,0x08,0x08,0xF8,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
///////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////
//汉字库，过年在家加的,打印时应该从最后一个字节开始发，依次发到第一个字节
char code cheng1[16]={0x00,0x30,0x28,0x20,0x21,0x2F,0x20,0xF1,//称
0x0C,0x02,0x88,0x89,0x7F,0x4E,0x49,0x08,};
char code cheng2[16]={0x00,0x18,0x60,0x80,0x00,0xFE,0x01,0xC2,
0x60,0x10,0x88,0x00,0xFF,0x00,0x80,0x40,};
char code zhong1[16]={0x00,0x10,0x10,0x10,0x97,0x95,0x95,0x95,//重
0xFF,0x55,0x55,0x55,0x57,0x50,0x10,0x10,};
char code zhong2[16]={0x00,0x02,0x02,0x12,0xD2,0x52,0x52,0x52,
0xFE,0x52,0x52,0x52,0xD2,0x12,0x02,0x02,};
char code dan1[16]={0x00,0x00,0x00,0x1F,0x54,0xD4,0x34,0x14,//单
0x1F,0x54,0x74,0x94,0x14,0x1F,0x00,0x00,};
char code dan2[16]={0x00,0x10,0x10,0xD0,0x90,0x90,0x90,0x90,
0xFF,0x90,0x90,0x90,0x90,0xD0,0x10,0x10,};
char code xu1[16]={0x00,0x20,0x20,0x28,0x2C,0x2A,0x29,0x6A,//序
0xAC,0x28,0x28,0x20,0x20,0x3F,0x00,0x00,};
char code xu2[16]={0x00,0x80,0xC0,0x80,0x80,0x80,0xFE,0x81,
0x82,0x80,0x80,0x80,0x00,0xF8,0x06,0x01,};
char code hao1[16]={0x00,0x02,0x02,0x02,0xFA,0x8A,0x8A,0x8A,//号
0x8A,0x8A,0x8A,0x8B,0xFA,0x02,0x02,0x02,};
char code hao2[16]={0x00,0x00,0x00,0x00,0x7C,0x42,0x41,0x42,
0x44,0x40,0x40,0xE0,0x40,0x00,0x00,0x00,};
char code ri1[16]={0x00,0x00,0x00,0x00,0x7F,0x42,0x42,0x42,//日
0x42,0x42,0x42,0x42,0x7F,0x00,0x00,0x00,};
char code ri2[16]={0x00,0x00,0x00,0x00,0xFC,0x08,0x08,0x08,
0x08,0x08,0x08,0x08,0xFC,0x00,0x00,0x00,};
char code qi1[16]={0x00,0x00,0x7F,0x44,0x44,0x44,0x7F,0x00,//期
0x20,0xFF,0x2A,0x2A,0x2A,0xFF,0x20,0x00,};
char code qi2[16]={0x00,0x00,0xFC,0x42,0x44,0x40,0xE0,0x18,
0x46,0xCC,0x50,0x40,0x40,0xD8,0x44,0x42,};
char code shi1[16]={0x00,0x08,0x08,0x08,0xFF,0x08,0x08,0x08,//时
0x09,0x08,0x3F,0x22,0x22,0x22,0x3F,0x00,};
char code shi2[16]={0x00,0x00,0x00,0x00,0xFE,0x01,0x02,0xC0,
0x00,0x00,0xE0,0x20,0x20,0x20,0xE0,0x00,};
char code jian1[16]={0x00,0x00,0x7F,0x40,0x40,0x4F,0x49,0x49,//间
0x49,0x49,0x0F,0x00,0x60,0x80,0x1F,0x00,};
char code jian2[16]={0x00,0x00,0xFE,0x01,0x02,0xE0,0x20,0x20,
0x20,0x20,0xE0,0x00,0x00,0x00,0xFF,0x00,};
char code che1[16]={0x00,0x00,0x21,0x21,0x21,0x21,0x21,0x2F,//车
0x21,0xE1,0x39,0x25,0x23,0x21,0x20,0x00,};
char code che2[16]={0x00,0x20,0x20,0x20,0x20,0x20,0x20,0xFF,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,};
char code huo1[16]={0x00,0x00,0x4C,0x44,0x25,0x25,0x25,0xF9,//货
0x11,0x11,0x41,0xE1,0x3D,0x10,0x08,0x00,};
char code huo2[16]={0x00,0x00,0x00,0x02,0xF3,0x06,0x04,0x08,
0x70,0x08,0x04,0x02,0xF9,0x01,0x00,0x00,};
char code mao1[16]={0x00,0x00,0x00,0x44,0x44,0x44,0x44,0x44,//毛
0x44,0x3F,0x22,0x22,0x22,0x22,0x20,0x00,};
char code mao2[16]={0x00,0x0E,0x42,0x42,0x42,0x42,0x42,0x42,
0x42,0xFC,0x20,0x20,0x20,0x20,0x20,0x20,};
char code pi1[16]={0x00,0x00,0x30,0x28,0x23,0x22,0x22,0xFE,//皮
0x22,0x22,0x23,0x22,0x20,0x3F,0x00,0x00,};
char code pi2[16]={0x00,0x02,0x03,0x02,0x04,0xC4,0x28,0x10,
0x28,0xC4,0x02,0x01,0x01,0xF8,0x06,0x01,};
char code jing1[16]={0x00,0x01,0x01,0x4F,0x69,0x59,0x4F,0x49,//净
0xC9,0x39,0x09,0x05,0x10,0x3B,0x40,0x00,};
char code jing2[16]={0x00,0x00,0x00,0xE0,0x20,0x20,0xFE,0x21,
0x22,0x20,0x20,0x00,0x00,0xC0,0x3F,0x20,};
char code guo1[16]={0x00,0x08,0x08,0x08,0xFF,0x08,0x08,0x08,//过
0x09,0x0A,0x08,0x00,0x20,0x71,0x81,0x01,};
char code guo2[16]={0x00,0x02,0x02,0x02,0xF2,0x0A,0x12,0x82,
0xC2,0x02,0x02,0x04,0x04,0xF8,0x04,0x02,};
char code bang1[16]={0x00,0x06,0x24,0x34,0x2C,0x65,0xA6,0x2C,//磅
0x34,0x26,0x43,0x42,0x7A,0x47,0x41,0x00,};
char code bang2[16]={0x00,0x00,0x80,0xBC,0xA2,0xA1,0xA2,0xF0,
0x8C,0x82,0xFD,0x08,0x08,0xFE,0x00,0x80,};
char code di1[16]={0x00,0x40,0x40,0x4E,0x5A,0x6A,0xCA,0x2F,//第
0x5A,0x4A,0x5A,0x6A,0xCB,0x20,0x10,0x08,};
char code di2[16]={0x00,0x00,0x78,0x44,0x48,0x40,0x40,0xFF,
0x60,0x50,0x48,0x48,0xC4,0x04,0x04,0x00,};
char code yi1[16]={0x00,0x01,0x03,0x01,0x01,0x01,0x01,0x01,//一
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,};
char code yi2[16]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
char code lian1[16]={0x00,0x08,0x48,0xE8,0x18,0x0F,0x38,0x48,//联
0x88,0x48,0x7F,0x49,0x49,0x49,0x7F,0x40,};
char code lian2[16]={0x00,0x82,0x83,0x84,0x88,0xF0,0x8C,0x82,
0x81,0xA0,0xFF,0x20,0x10,0x10,0xF8,0x10,};
char code si1[16]={0x00,0x00,0x7F,0x40,0x40,0x48,0x49,0x49,//司
0x49,0x49,0x49,0x49,0x49,0x49,0x08,0x00,};
char code si2[16]={0x00,0x00,0xFC,0x02,0x04,0x00,0xF0,0x20,
0x20,0x20,0x20,0x20,0x20,0xF8,0x00,0x00,};
char code yuan1[16]={0x00,0x00,0x00,0x07,0xF4,0x94,0x94,0x94,//员
0x95,0x94,0x94,0xF4,0x07,0x00,0x00,0x00,};
char code yuan2[16]={0x00,0x00,0x00,0xF2,0x07,0x04,0x08,0x10,
0xE0,0x18,0x04,0x02,0xF1,0x01,0x00,0x00,};
char code bao1[16]={0x00,0x01,0x01,0x7D,0x45,0x45,0x47,0x45,//保
0x45,0x7D,0x01,0x41,0xE8,0x1F,0x04,0x02,};
char code bao2[16]={0x00,0x08,0x0C,0x18,0x30,0xC0,0xFE,0x80,
0x60,0x10,0x08,0x04,0x00,0xFE,0x00,0x00,};
char code liu1[16]={0x00,0x00,0x7C,0x42,0x41,0x42,0x78,0x46,//留
0x01,0x86,0x88,0x54,0x42,0x7F,0x00,0x00,};
char code liu2[16]={0x00,0x00,0x00,0xFF,0x92,0x92,0x92,0x92,
0xFE,0x92,0x92,0x92,0xFF,0x00,0x00,0x00,};
char code bei1[16]={0x00,0x00,0x00,0x00,0x41,0x71,0x4A,0x44,//备
0x44,0x4A,0x51,0xE1,0x10,0x08,0x04,0x00,};
char code bei2[16]={0x00,0x80,0xC0,0x80,0xFF,0x52,0x52,0x52,
0x7E,0x52,0x52,0x52,0xFF,0x80,0x40,0x40,};
char code zhu1[16]={0x00,0x10,0x10,0x10,0x10,0x10,0x7F,0x90,//注
0x10,0x10,0x10,0x06,0x61,0x80,0x06,0x08,};
char code zhu2[16]={0x00,0x02,0x82,0x82,0x82,0x82,0xFE,0x82,
0x82,0x82,0x02,0x02,0x80,0x7F,0x20,0x20,};
char code dian1[16]={0x00,0x00,0x00,0x1F,0x12,0x12,0x12,0x12,//电
0xFF,0x12,0x12,0x12,0x12,0x1F,0x00,0x00,};
char code dian2[16]={0x00,0x0E,0x02,0xF2,0x22,0x22,0x22,0x22,
0xFC,0x20,0x20,0x20,0x20,0xF0,0x00,0x00,};
char code zi1[16]={0x00,0x00,0x01,0x00,0x40,0x60,0x50,0x48,//子
0x47,0x40,0x40,0x40,0x40,0x40,0x00,0x00,};
char code zi2[16]={0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0xFE,0x81,0x82,0x80,0x80,0x80,0x80,0x80,};
char code qi411[16]={0x00,0x00,0x20,0x28,0x2B,0x2A,0x2A,0x2A,//汽
0x2A,0xEA,0x1A,0x04,0x0F,0x60,0x86,0x08,};
char code qi412[16]={0x00,0x0F,0x02,0x0C,0xF0,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x80,0x7F,0x20,0x20,};
char code heng1[16]={0x00,0x44,0x47,0x44,0x44,0x00,0x6F,0x5A,//衡
0x4F,0xCA,0x2F,0x10,0x58,0xC7,0x32,0x09,};
char code heng2[16]={0x00,0x00,0xFC,0x02,0x04,0x22,0xA4,0xA8,
0xF0,0xA8,0xA4,0x22,0x00,0xFF,0x00,0x00,};
char code ji1[16]={0x00,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,//计
0x04,0x04,0x00,0x00,0x27,0x74,0x84,0x04,};
char code ji2[16]={0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,
0x00,0x10,0x08,0x04,0xFE,0x00,0x00,0x00,};
char code liang1[16]={0x00,0x02,0x02,0x02,0xFB,0xAA,0xAA,0xAA,//量
0xAB,0xAA,0xAA,0xAA,0xFB,0x02,0x02,0x02,};
char code liang2[16]={0x00,0x02,0x02,0x0A,0xEA,0xAA,0xAA,0xAA,
0xFE,0xAA,0xAA,0xAA,0xEA,0x02,0x02,0x02,};
char code hu1[16]={0x00,0x00,0x7F,0x49,0x49,0x7F,0x00,0x09,//湖
0x09,0xFF,0x09,0x09,0x06,0x61,0x84,0x08,};
char code hu2[16]={0x00,0x00,0xFE,0x01,0x02,0xF0,0x0C,0xFA,
0x09,0x08,0x08,0xF8,0x00,0xC0,0x3F,0x20,};
char code nan1[16]={0x00,0x20,0x67,0x24,0x24,0x26,0x25,0x24,//南
0xF4,0x2D,0x26,0x24,0x24,0x27,0x20,0x20,};
char code nan2[16]={0x00,0x00,0xFC,0x22,0xA4,0xA0,0xA0,0xA0,
0xFE,0xA0,0xA0,0xA0,0x20,0xFE,0x00,0x00,};
char code xiang1[16]={0x00,0x00,0x3F,0x24,0x24,0x24,0x3F,0x08,//湘
0x09,0xFF,0x0B,0x08,0x03,0x60,0x86,0x08,};
char code xiang2[16]={0x00,0x00,0xFE,0x44,0x44,0x44,0xFE,0x00,
0x00,0xFE,0x00,0xC0,0x20,0xFE,0x20,0x20,};
char code tan1[16]={0x00,0x00,0xB8,0xAB,0xAA,0xFA,0xAA,0xFA,//潭
0xAA,0xAB,0xB8,0x06,0x01,0x60,0x84,0x08,};
char code tan2[16]={0x00,0x08,0x08,0xE8,0xA8,0xA8,0xBF,0xA8,
0xA8,0xE8,0x08,0x00,0xC0,0x3F,0x10,0x10,};
char code ju1[16]={0x00,0x00,0x40,0x40,0x47,0x44,0x44,0x44,//巨
0x44,0x44,0x44,0x44,0x44,0x7F,0x00,0x00,};
char code ju2[16]={0x00,0x04,0x04,0x04,0xE4,0x44,0x44,0x44,
0x44,0x44,0x44,0x44,0x44,0xFE,0x00,0x00,};
char code niu1[16]={0x00,0x00,0x10,0x10,0x10,0x10,0x10,0xFF,//牛
0x10,0x10,0x10,0x10,0x70,0x0C,0x02,0x00,};
char code niu2[16]={0x00,0x80,0x80,0x80,0x80,0x80,0x80,0xFE,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,};
char code qi421[16]={0x00,0x00,0xF2,0x96,0x9A,0x92,0xF3,0x03,//器
0x0E,0xF3,0x93,0x92,0x92,0xF2,0x02,0x02,};
char code qi422[16]={0x00,0x40,0x60,0x7E,0xA2,0xA2,0x22,0x3E,
0x00,0x3E,0x22,0xA2,0xA2,0x7E,0x40,0x40,};
char code chang1[16]={0x00,0x40,0x40,0x40,0x40,0x40,0x40,0x40,//厂
0x40,0x40,0x40,0x40,0x40,0x7F,0x00,0x00,};
char code chang2[16]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0xF0,0x0C,0x02,};
char code zhi1[16]={0x00,0x00,0xFF,0x00,0x00,0x3F,0x00,0x12,//制
0x12,0x12,0xFF,0x12,0x52,0xF2,0x0A,0x00,};
char code zhi2[16]={0x00,0x00,0xFE,0x01,0x02,0xF0,0x00,0xFC,
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -