code.h

KIT RTC按键设置闹钟程序!

/* System configuration .Fosc、Fcclk、Fcco、Fpclk must be defined */
/* 系统设置, Fosc、Fcclk、Fcco、Fpclk必须定义*/
#define Fosc            12000000                   //Crystal frequence,10MHz~25MHz，should be the same as actual status. 
						    //应当与实际一至晶振频率,10MHz~25MHz，应当与实际一至
#define Fcclk           (Fosc * 4)                  //System frequence,should be (1~32)multiples of Fosc,and should be equal or less  than 60MHz. 
						    //系统频率，必须为Fosc的整数倍(1~32)，且<=60MHZ
#define Fcco            (Fcclk * 4)                 //CCO frequence,should be 2、4、8、16 multiples of Fcclk, ranged from 156MHz to 320MHz. 
						    //CCO频率，必须为Fcclk的2、4、8、16倍，范围为156MHz~320MHz
#define Fpclk           (Fcclk / 4) * 1             //VPB clock frequence , must be 1、2、4 multiples of (Fcclk / 4).
						    //VPB时钟频率，只能为(Fcclk / 4)的1、2、4倍

#define Fwdt			(Fpclk/4)


#define	uchar unsigned char
#define uint unsigned int




extern void RTCInit(void);
extern  void	delay1s(unsigned char i);
extern  void Draw_a(uchar d_where,uint x_add,uchar layer,uchar width);
extern  void  ReadRTC(void);
extern  uchar  Scan_Key(void);



extern unsigned char const Bmpt1[];
extern unsigned char const Bmpt2[];
extern unsigned char const Bmpt3[];
extern unsigned char const Bmpt4[];
extern unsigned char const Bmpt5[];
extern unsigned char const Bmpt6[];
extern unsigned char const Bmpt7[];
extern unsigned char const Bmptc[];
extern unsigned char const bmp001[];
extern	unsigned char const Bmp08[];
extern	unsigned char const Bmp07[];
extern	unsigned char const Bmp06[];
extern	unsigned char const Bmp05[];
extern	unsigned char const Bmp04[];
extern	unsigned char const Bmp03[];
extern	unsigned char const Bmp02[];
extern	unsigned char const Bmp01[];
extern	unsigned char const Bmp012[];
extern	unsigned char const Bmp003[];
extern	unsigned char const Bmp002[];
extern unsigned char const ARMKIT_bmp[];
extern	   unsigned char  const  bmp009[];