uz2400.h

NEC 的无线通讯方案

/*
* $Id: uz2400.h,v 1.11 2007/10/25 02:45:26 chunchia Exp $
*/
/*******************************************************************************

       UBEC (Uniband Electronic Corp.)

       Project: U-NET01, Ubiquitous network platform

       File: uz2400.h

       Version: 0.3.0

       Usage:  Special header for the UBEC UZ2400 Zigbee RF.

       Platform: U-NET01 DK with Keil 8051 C compiler

       Reference:

               Silicon Laboratories: C8051F124, C8051F340

               UBEC: UZ2400, UZ2410

       Note :

               Copyright (C) 2007 Uniband Electronic Corporation, All rights reserved

********************************************************************************/


//Define the address
#define TXBASE  	0x0
#define TX_N 		0x0
#define TX_N_HDR    	0x0
#define TX_N_LEN    	0x1
#define TX_N_BASE   	0x2
#define TX_BCN		0x80
#define TX_G1		0x100
#define TX_G2		0x180

#define REGBASE     	0x200
#define RXBASE      	0x300
#define RX_N		0x300
#define KEYBASE     	0x280
#define KEY_TX_N	0x280
#define KEY_TX_B	0x2a0
#define KEY_TX_G1	0x290
#define KEY_TX_G2	0x2a0
#define KEY_RX_N	0x2b0

// short-address registers (SREGXX)
#define	RXMCR		0x00
#define	PANIDL		0x01
#define	PANIDH		0x02
#define	SADRL		0x03
#define	SADRH		0x04
#define	EADR0		0x05
#define	EADR1		0x06
#define	EADR2		0x07
#define	EADR3		0x08
#define	EADR4		0x09
#define	EADR5		0x0a
#define	EADR6		0x0b
#define	EADR7		0x0c
#define	RXFLUSH		0x0d
#define TXSTATE0    	0x0e
#define TXSTATE1    	0x0f
#define ORDER		0x10
#define TXMCR		0x11
#define ACKTMOUT 	0x12
#define SLALLOC		0x13
#define SYMTICKL	0x14
#define SYMTICKH	0x15
#define	PAONTIME	0x16
#define PAONSETUP	0x17
#define FFOEN		0x18
#define CSMACR		0x19
#define	TXBCNTRIG	0x1a
#define	TXNMTRIG	0x1b
#define	TXG1TRIG	0x1c
#define	TXG2TRIG	0x1d
#define	ESLOTG23	0x1e
#define	ESLOTG45	0x1f
#define	ESLOTG67	0x20
#define	TXPEND		0x21
#define	TXBCNINTL	0x22
#define	FRMOFFSET	0x23
#define	TXSR		0x24
#define	TXLNERR 	0x25
#define GATE_CLK	0x26
#define	TXOFFSET	0x27
#define	HSYMTMR0	0x28
#define	HSYMTMR1	0x29
#define	SOFTRST		0x2a
#define BISTCR      	0x2b
#define	SECCR0		0x2c
#define	SECCR1		0x2d
#define TXPEMISP    	0x2e
#define	SECISR		0x2f
#define	RXSR		0x30
#define	ISRSTS		0x31
#define	INTMSK		0x32
#define GPIO        	0x33
#define GPIODIR     	0x34
#define SLPACK      	0x35
#define RFCTL       	0x36
#define SECCR2      	0x37
#define	BBREG0		0x38
#define	BBREG1		0x39
#define	BBREG2		0x3a
#define	BBREG3		0x3b
#define	BBREG4		0x3c
#define	BBREG5		0x3d
#define BBREG6      	0x3e
#define BBREG7		0x3f
#define RSSITHCCA	BBREG7

// long-address registers (LREGXX)
#define RFCTRL0     		0x200
#define RFCTRL1    		0x201
#define RFCTRL2     		0x202
#define	RFCTRL3     		0x203
#define RFCTRL4     		0x204
#define RFCTRL5			0x205
#define RFCTRL6     		0x206
#define RFCTRL7			0x207
#define RFCTRL8     		0x208
#define CAL1			0x209
#define CAL2			0x20a
#define CAL3			0x20b
#define SFCNTRH     		0x20c
#define SFCNTRM     		0x20d
#define SFCNTRL     		0x20e
#define RFSTATE     		0x20f
#define RSSI        		0x210
#define CLKIRQCR		0x211
#define	SRCADRMODE		0x212
#define	SRCADDR0		0x213
#define	SRCADDR1		0x214
#define	SRCADDR2		0x215
#define	SRCADDR3		0x216
#define	SRCADDR4		0x217
#define	SRCADDR5		0x218
#define	SRCADDR6		0x219
#define	SRCADDR7		0x21a
#define RXFRAMESTATE		0x21b
#define SECSTATUS		0x21c
#define STCCMP      		0x21d
#define HLEN        		0x21e
#define FLEN        		0x21f
#define SCLKDIV  		0x220
#define WAKETIMEL		0x222
#define WAKETIMEH		0x223
#define	TXREMCNTL		0x224
#define	TXREMCNTH		0x225
#define	TXMAINCNTL		0x226
#define	TXMAINCNTM		0x227
#define	TXMAINCNTH0		0x228
#define	TXMAINCNTH1		0x229
#define	RFMANUALCTRLEN		0x22a
#define	RFMANUALCTRL		0x22b
#define TxDACMANUALCTRL		0x22c
#define	RFMANUALCTRL2		0x22d
#define TESTRSSI		0x22e
#define	TESTMODE 		0x22f
#define	ASSO_BCN_LADR0		0x230
#define	ASSO_BCN_LADR1		0x231
#define	ASSO_BCN_LADR2		0x232
#define	ASSO_BCN_LADR3		0x233
#define	ASSO_BCN_LADR4		0x234
#define	ASSO_BCN_LADR5		0x235
#define	ASSO_BCN_LADR6		0x236
#define	ASSO_BCN_LADR7		0x237
#define	ASSO_BCN_SADR0		0x238
#define	ASSO_BCN_SADR1		0x239
#define	ASSO_BCN_CR		0x23a
#define	SEC_PAR_ORDER		0x23b
// 0x40 ~ 0x4c NWL, APL security nonce

//Define the GPIO Address
#define GPIOCS		0x92
#define GPIOCLK		0x93
#define GPIODIN		0x94
#define GPIODOUT	0x95
#define GPIODIO3	0x96
#define GPIODIO4	0x97

//Batter Monitor Threshold, Do not use other value
#define BATT_3v5 0xe0
#define BATT_3v3 0xd0
#define BATT_3v2 0xc0
#define BATT_3v1 0xb0
#define BATT_2v8 0xa0
#define BATT_2v7 0x90
#define BATT_2v6 0x80
#define BATT_2v5 0x70