can.pjt

本程序用于测试F2812的ECAN接口,用户可以根据具体的需要进行修改

; Code Composer Project File, Version 2.0 (do not modify or remove this line)

[Project Settings]
ProjectName="CAN"
ProjectDir="D:\tic2000\myprojects\can\"
ProjectType=Executable
CPUFamily=TMS320C28XX
Tool="Compiler"
Tool="DspBiosBuilder"
Tool="Linker"
Config="Debug"
Config="Release"

[Source Files]
Source="..\..\c2000\cgtools\lib\rts2800.lib"
Source="CAN_TEST.c"
Source="DSP28_DefaultIsr.c"
Source="DSP28_ECan.c"
Source="DSP28_GlobalVariableDefs.c"
Source="DSP28_Gpio.c"
Source="DSP28_Mcbsp.c"
Source="DSP28_PieCtrl.c"
Source="DSP28_PieVect.c"
Source="DSP28_SysCtrl.c"
Source="DSP28_Xintf.c"
Source="DSP28_XIntrupt.c"
Source="SRAM.cmd"

["Compiler" Settings: "Debug"]
Options=-g -q -fr"D:\tic2000\myprojects\can\Debug" -d"_DEBUG" -d"LARGE_MODEL" -ml -v28

["Compiler" Settings: "Release"]
Options=-q -o3 -fr"D:\tic2000\myprojects\can\Release" -d"LARGE_MODEL" -ml -v28

["DspBiosBuilder" Settings: "Debug"]
Options=-v28

["DspBiosBuilder" Settings: "Release"]
Options=-v28

["Linker" Settings: "Debug"]
Options=-q -c -o".\Debug\CAN.out" -x

["Linker" Settings: "Release"]
Options=-q -c -o".\Release\CAN.out" -x

["..\..\c2000\cgtools\lib\rts2800.lib" Settings: "Debug"]
LinkOrder=18

["CAN_TEST.c" Settings: "Debug"]
LinkOrder=1

["DSP28_DefaultIsr.c" Settings: "Debug"]
LinkOrder=4

["DSP28_ECan.c" Settings: "Debug"]
LinkOrder=5

["DSP28_GlobalVariableDefs.c" Settings: "Debug"]
LinkOrder=7

["DSP28_Gpio.c" Settings: "Debug"]
LinkOrder=8

["DSP28_Mcbsp.c" Settings: "Debug"]
LinkOrder=10

["DSP28_PieCtrl.c" Settings: "Debug"]
LinkOrder=11

["DSP28_PieVect.c" Settings: "Debug"]
LinkOrder=12

["DSP28_SysCtrl.c" Settings: "Debug"]
LinkOrder=15

["DSP28_Xintf.c" Settings: "Debug"]
LinkOrder=16

["DSP28_XIntrupt.c" Settings: "Debug"]
LinkOrder=17