📄 hex_1.c.bak
字号:
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x20,0x00,0x00,0x00,0x00,
0x1F,0xFF,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x84,0x42,0x00,0x00,0x00,0x00,
0x00,0x00,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x40,0x84,0x00,0x00,0x00,0x00,
0x00,0x03,0x80,0x00,0x00,0x00,0x00,0x00,0xE0,0x04,0x00,0x08,0x80,0x60,0x00,0x00,
0x00,0x1F,0xFF,0xC0,0x00,0x00,0x00,0x01,0x10,0x02,0x1F,0xC1,0x01,0xD0,0x00,0x38,
0x00,0x00,0x00,0x01,0xFC,0x00,0x00,0x00,0x10,0x00,0x70,0x72,0x01,0x0C,0x00,0x68,
0x00,0x00,0x00,0x00,0x00,0xE0,0x00,0x06,0x13,0x08,0x40,0x08,0x03,0x06,0x00,0xCC,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x09,0x84,0x80,0x0C,0x1E,0x03,0x89,0x86,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0xC1,0x80,0x04,0x68,0x00,0xFF,0x02,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x41,0x00,0x00,0xC0,0x00,0x60,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x61,0x00,0x00,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x31,0x00,0x00,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x0C,0x00,0x00,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x04,0x00,0x01,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x06,0x00,0x01,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x02,0x00,0x02,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x38,0x00,0x00,0x00,0xC0,0x00,0x03,0x00,0x02,0x00,0x00,0x00,0x00,
0x00,0x00,0x01,0xE8,0x00,0x00,0x01,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x1A,0x08,0x00,0x00,0x03,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x08,0x00,0x00,0x02,0x00,0x00,0x00,0xC0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x08,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x10,0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x3C,0x18,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x01,0xC0,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x03,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x02,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x02,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x02,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x02,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x02,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x04,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x04,0x00,0x02,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x01,0xF4,0x00,0x02,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x03,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x02,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x02,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x79,0xF8,0x10,0x20,0x00,
0x02,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x09,0x08,0x10,0x20,0x00,
0x02,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x09,0x08,0x10,0x20,0x00,
0x06,0x00,0x00,0x00,0x00,0xC0,0x00,0x00,0x00,0x00,0x00,0x79,0xF8,0x10,0x20,0x00,
0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x40,0x40,0xFD,0xFE,0x00,
0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x43,0xFC,0x10,0x20,0x00,
0x00,0x00,0x00,0x00,0x00,0x60,0x00,0x00,0x03,0xFF,0xF0,0x42,0x44,0x10,0x60,0x00,
0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x7A,0x44,0x38,0x70,0x00,
0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x0B,0xFC,0x74,0xB0,0x00,
0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x08,0x40,0x54,0xA8,0x00,
0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x08,0x48,0x91,0x28,0x00,
0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x08,0x44,0x12,0x26,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x7E,0x14,0x24,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2B,0xC4,0x10,0x20,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x10,0x20,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
/*------------------检查忙位-----------------------------*/
void chk_busy()
{ RS=0;
RW=1;
E=1;
Lcd_Bus=0xff;
while((Lcd_Bus&0x80)==0x80);
E=0;
}
/*------------------延时子程序-----------------------------*/
void delay(unsigned int t)
{ unsigned int i,j;
for(i=0;i<t;i++)
for(j=0;j<10;j++)
;
}
/*------------------写命令到LCD------------------------------*/
void write_com(unsigned char cmdcode)
{
chk_busy();
RS=0;
RW=0;
E=1;
Lcd_Bus=cmdcode;
delay(5);////////////////////在数据写入的时候加入适当的延时
E=0;
delay(5);
}
/*-------------------写数据到LCD----------------------------*/
void write_data(unsigned char Dispdata)
{
chk_busy();
RS=1;
RW=0;
E=1;
Lcd_Bus=Dispdata;
delay(5);///////////////////在数据写入的时候加入适当的延时
E=0;
delay(5);
}
/*------------------初始化LCD屏--------------------------*/
void lcdreset()
{ delay(2000);
write_com(0x30);
delay(10); //选择基本指令集
write_com(0x30); //选择8bit数据流
delay(5);
write_com(0x0c); //开显示(无游标、不反白)
delay(10);
write_com(0x01); //清除显示，并且设定地址指针为00H
delay(500);
write_com(0x06); //指定在资料的读取及写入时，设定游标的移动方向及指定显示的移位
delay(0);
}
/*------------------自定义一个字符代码(一个星星和月亮)--------------------------*/
void CGRAM()
{ int i;
write_com(0x30);
write_com(0x40);
for(i=0;i<16;i++)
{write_data(zk[i*2]);
write_data(zk[i*2+1]);
}
}
/*------------------显示字符串--------------------------*/
void hzkdis(unsigned char code *s)
{ while(*s>0)
{ write_data(*s);
s++;
delay(50);
}
}
/*------------------首屏显示--------------------------*/
void ceshi()
{write_com(0x01);//清除显示，并且设定地址指针为00H
delay(5);
write_com(0x80);//第一行（如果是地址是：80H，即LCD的第一行的第一个位置显示）
hzkdis("----强林单片机");
write_com(0x90);//第二行（如果是地址是：90H，即LCD的第二行的第一个位置显示）
hzkdis("--技术项目交易网");
write_com(0x88);//第三行（如果是地址是：88H，即LCD的第二行的第一个位置显示）
hzkdis("LCD12864点阵液晶");
write_com(0x9A);//第四行（如果是地址是：98H，即LCD的第二行的第一个位置显示）
hzkdis("测试程序");
}
/*------------------显示图片------------------------2005.11.14.21:20修改---benladn911---*/
void Disp_Img(unsigned char code *img)
{ unsigned int j=0;
unsigned char x,y,i;
for(i=0;i<9;i+=8)
for(y=0;y<32;y++)/*原来 为 y<26 ,上下两个半屏不能正常对接显示，导致显示的图片中间有空隙*/
for(x=0;x<8;x++)
{ write_com(0x36);//功能设置---8BIT控制界面，扩充指令集
write_com(y+0x80); //行地址
write_com(x+0x80+i); //列地址
write_com(0x30);
write_data(img[j++]);
write_data(img[j++]);
}
}
/*------------------清整个GDRAM空间----------------------------*/
void clrgdram()
{ unsigned char x,y;
for(y=0;y<64;y++)
for(x=0;x<16;x++)
{ write_com(0x34);
write_com(y+0x80); //行地址
write_com(x+0x80); //列地址
write_com(0x30);
write_data(0x00);
write_data(0x00);
}
}
/*------------------整屏写入数据:全亮，或者竖条-----------------------------*/
void lcdfill(unsigned char disdata)
{ unsigned char x,y;
for(y=0;y<32;y++)
for(x=0;x<16;x++)
{ write_com(0x36);
write_com(y+0x80); //行地址
write_com(x+0x80); //列地址
write_com(0x30);
write_data(disdata);
write_data(disdata);
}
write_com(0x34);
write_com(0x36);
}
/*------------------显示横-----------------------------*/
void Disp_H_Line()
{ unsigned char x,y;
unsigned char k=0x00;
for(y=0;y<32;y++)
{ k=~k;
for(x=0;x<16;x++)
{ write_com(0x36);
write_com(y+0x80); //行地址
write_com(x+0x80); //列地址
write_com(0x30);
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -