main.c

ICETEK-VC5416-EDULab瑞泰创新科技5416开发板的实验源程序

//////////////////////////////////////////////
// 1.在程序中"break point"注释行语句上加软件断点
// 2.菜单view->graph->Image:
//     color space                  = RGB
//     Start Address -R Source      = y
//     Start Address -G Source      = y
//     Start Address -B Source      = y
//     Lines Per Display            = 96
//     Pixels Per Line              = 120
//     Byte Packing to Fill 32 Bits = No
//     Image Origin                 = Top Left
// 3.按F5运行到断点可显示采集图像
// 4.转动摄像头后再按F5可再次采集
///////////////////////////////////////
#include "math.h"
#include "scancode.h"

#define SPSA0 *(unsigned int *)0x38
#define SPSD0 *(unsigned int *)0x39
#define REGISTERCLKMD (*(unsigned int *)0x58)
#define REGISTERCLK (*(unsigned int *)0x29)
#define WAITSTATUS (*(unsigned int *)0x28)

#define IDKCCMDRESET 2
#define IDKCCMDCAPTURE 4
#define IDKCCMDRESETRP 8
#define IDKCCMDRESETWP 0x10
#define IDKCCMDCOLOR 0x20
#define IDKIMGREADY 2

ioport unsigned char port8000;	
ioport unsigned char port8001;	
ioport unsigned char port8002;	
ioport unsigned char port8007;	
ioport unsigned char porta000;	
ioport unsigned char porta001;	
ioport unsigned char porta004;	
ioport unsigned int porta005;	
ioport unsigned int porta006;	
ioport unsigned char porta008;	
ioport unsigned char porta00c;	
#define I2C_REG porta008

void Delay(unsigned int nTime);
void StartIIC(void);
void StopIIC(void);
void AckIIC(void);
void WriteIIC(unsigned char data);
void Init5150(void);
void DelayMSEC(unsigned int nDelay);
void Close5150(void);

#define VIDEOWIDTH 722
#define VIDEOHEIGHT 288
#define IMGWIDTH 120
#define IMGHEIGHT 96
#define XSTART 300
#define YSTART 100
#define XSAMPLE 2
#define YSAMPLE 1

unsigned char buffer[724],y[IMGWIDTH*IMGHEIGHT];
main()
{
	int i,j,k,x,c1,c2,c3,xx,yy,uu,vv,xxx;
	float rr,gg,bb;
	unsigned int www=722,bGoodFrame,dbScanCode;
	int a,b,c,xstart,ystart,xsample,ysample;
	unsigned int uWork;

	xx=1;
	for ( j=0;j<72;j++ )
	{
		for ( i=0;i<90;i++ )
			y[j*90+i]=0;
	}
	port8000=0;	// 初始化ICETEK-CTR
	port8000=0x80;
	port8000=0;
	port8007=0;
	port8007=0x40;
	a=288;
	b=722;
	c=0;
	xsample=XSAMPLE;
	ysample=YSAMPLE;
	xstart=XSTART;
	ystart=YSTART;
	REGISTERCLKMD=0;	// DSP低速运行
	REGISTERCLK=0x6002;	// 设置CLKOUT输出
	WAITSTATUS&=0x08fff;	// 等待状态
	Init5150();		// 初始化ICETEK-TVP5150-E
	REGISTERCLKMD=0x09007;	// DSP提速运行
	WAITSTATUS=0x09fff;	// 至少1个等待状态
	REGISTERCLK=0x6002;
	xxx=porta00c;
	
	while ( 1 )
	{
		if ( xx )
		{
			porta000=IDKCCMDRESET; porta000=0;	//复位ICETEK-TVP5150-E
			Delay(16);
			porta000=IDKCCMDRESETWP;		// 复位FIFO写指针
			porta000=IDKCCMDCAPTURE;		// 开始采集图象
			do
			{
				xxx=porta00c;			// 读状态寄存器
			} while ( (xxx&2)==0 );			// 等待图象准备好
			porta000=0;
		}
		x=0;
		porta000=IDKCCMDRESETRP;			// 复位FIFO读指针
		Delay(16);		
		porta000=0;	
		Delay(16);		
		uWork=porta004;					// 读取首个数据并放弃
		Delay(16);		
		x=0;
		for ( i=0;i<724;i++ )	buffer[i]=0;
		for ( i=0;i<c;i++ )	uWork=porta004;
		for ( j=0;j<VIDEOHEIGHT;j++ )			// 读取整幅图象722x288
		{						// 并抽样生成120x96图象
			for ( i=0;i<VIDEOWIDTH;i++ )
			{
				buffer[i]=porta004;
			}
			if ( x<IMGHEIGHT && j>=ystart &&(j%ysample==0) )
			{
				for ( i=0;i<IMGWIDTH;i++ )
				{
					y[x*IMGWIDTH+i]=buffer[i*xsample+xstart];
				}
				x++;
			}
		}
		xxx=porta00c;
		x=0;		// BREAK POINT 在此设置软件断点
		x=0;
		x=0;
	}
	exit(0);
}               

void Delay(unsigned int nDelay)
{
	int i,j,k=0;
	for ( i=0;i<nDelay;i++ )
		for ( j=0;j<64;j++ )
			k++;
}

void StartIIC(void)
{
	I2C_REG = 0x05;		/*	"00100101":sda,scl = '1' */
	DelayMSEC(1);
	I2C_REG = 0x04;		/*	"00100100":sda= '0',scl = '1' */
	DelayMSEC(1);
}
void StopIIC(void)
{	
	I2C_REG = 0x024;		/*	"00100101":sda = '0',scl = '1' */
	DelayMSEC(1);
	I2C_REG = 0x025;		/*	"00100101":sda,scl = '1' */
	DelayMSEC(1);
}		
void AckIIC(void)
{
	I2C_REG = 0x020;		/*	"00100101":sda='z',scl = '0' */
	I2C_REG = 0x022;		/*	"00100101":sda='z',scl = '0' */
	DelayMSEC(1);
	I2C_REG = 0x026;		/*	"00100101":sda='z',scl = '1' */
	DelayMSEC(1);
	I2C_REG = 0x022;		/*	"00100101":sda='z',scl = '0' */
	DelayMSEC(1);
	I2C_REG = 0x021;		/*	"00100101":sda='1',scl = '0' */
	DelayMSEC(1);
}	
void WriteIIC(unsigned char data)
{
	unsigned char BitCounter = 8;
	unsigned char Temp;
	unsigned int reg_val;
	
	reg_val = 0x020;
	I2C_REG = 0x20;		/*SCL 置低 sda 置低*/
	DelayMSEC(1);						/*延时*/
	do{
		Temp = data;
		reg_val &= 0x0fffffffb;
		I2C_REG = reg_val;		/*SCL 置低*/
		DelayMSEC(1);						/*延时*/
		
		if((Temp&0x80)==0x80)
			reg_val |= 0x01;	/*如果最高位是1*/
		else
			reg_val &= 0x0fffffe;
		I2C_REG = reg_val;		/*设置SDA*/
		DelayMSEC(1);						/*延时*/

		reg_val |= 0x004;
		I2C_REG = reg_val;		/*SCL 置高*/
		DelayMSEC(1);						/*延时*/

		Temp = data<<1;
		data = Temp;
		BitCounter --;
	}while(BitCounter);

	reg_val &= 0x0fffffffb;
	I2C_REG = reg_val;		/*SCL 置低*/
	DelayMSEC(3);						/*延时*/
}	

void Init5150(void)
{
	int i;
	
	StartIIC();
	WriteIIC(0x0ba);			
	AckIIC();
	WriteIIC(0x03);		// TVP5150控制寄存器3，取值0x8F
	AckIIC();
	WriteIIC(0x08f);
	AckIIC();
	StopIIC();
	DelayMSEC(10);
}

void DelayMSEC(unsigned int nDelay)
{
	unsigned int i,j,k;
	
	for ( i=0;i<nDelay*64;i++ )
	{
		k++;
	}
}

/* END OF FILE */