dm9ks.c

dm9000aep linux下驱动程序

/*

  dm9ks.c: Version 2.08 2007/02/12 
  
        A Davicom DM9000A/DM9010 ISA NIC fast Ethernet driver for Linux.

	This program is free software; you can redistribute it and/or
	modify it under the terms of the GNU General Public License
	as published by the Free Software Foundation; either version 2
	of the License, or (at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
	GNU General Public License for more details.


  (C)Copyright 1997-2007 DAVICOM Semiconductor,Inc. All Rights Reserved.

V2.00 Spenser - 01/10/2005
			- Modification for PXA270 MAINSTONE.
			- Modified dmfe_tx_done().
			- Add dmfe_timeout().
V2.01	10/07/2005	-Modified dmfe_timer()
			-Dected network speed 10/100M
V2.02	10/12/2005	-Use link change to chage db->Speed
			-dmfe_open() wait for Link OK  
V2.03	11/22/2005	-Power-off and Power-on PHY in dmfe_init_dm9000()
			-support IOL
V2.04	12/13/2005	-delay 1.6s between power-on and power-off in 
			 dmfe_init_dm9000()
			-set LED mode 1 in dmfe_init_dm9000()
			-add data bus driving capability in dmfe_init_dm9000()
			 (optional)
10/3/2006	-Add DM8606 read/write function by MDC and MDIO
V2.06	01/03/2007	-CONT_RX_PKT_CNT=0xFFFF
			-modify dmfe_tx_done function
			-check RX FIFO pointer
			-if using physical address, re-define I/O function
			-add db->cont_rx_pkt_cnt=0 at the front of dmfe_packet_receive()
V2.08	02/12/2007	-module parameter macro
			2.4  MODULE_PARM
			2.6  module_param
			-remove #include <linux/config>
  			-fix dmfe_interrupt for kernel 2.6.20                  
05/24/2007	-support ethtool and mii-tool
05/30/2007	-fix the driver bug when ifconfig eth0 (-)promisc and (-)allmulti.
06/05/2007	-fix dm9000b issue(ex. 10M TX idle=65mA, 10M harmonic)
			-add flow control function (option)
*/

#define DRV_NAME	"dm9KS"
#define DRV_VERSION	"2.08"
#define DRV_RELDATE	"2007-06-05"

#if defined(MODVERSIONS)
#include <linux/modversions.h>
#endif

//#include <linux/config.h>
#include <linux/init.h>				
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/version.h>
#include <asm/dma.h>
#include <linux/spinlock.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/ethtool.h>

#ifdef CONFIG_ARCH_MAINSTONE
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#endif

//#define DM8606

/* Board/System/Debug information/definition ---------------- */

#define DM9KS_ID		0x90000A46
#define DM9010_ID		0x90100A46
/*-------register name-----------------------*/
#define DM9KS_NCR		0x00	/* Network control Reg.*/
#define DM9KS_NSR		0x01	/* Network Status Reg.*/
#define DM9KS_TCR		0x02	/* TX control Reg.*/
#define DM9KS_RXCR		0x05	/* RX control Reg.*/
#define DM9KS_BPTR		0x08
#define DM9KS_FCTR		0x09
#define DM9KS_FCR		0x0a
#define DM9KS_EPCR		0x0b
#define DM9KS_EPAR		0x0c
#define DM9KS_EPDRL		0x0d
#define DM9KS_EPDRH		0x0e
#define DM9KS_GPR		0x1f	/* General purpose register */
#define DM9KS_CHIPR		0x2c
#define DM9KS_TCR2		0x2d
#define DM9KS_SMCR		0x2f 	/* Special Mode Control Reg.*/
#define DM9KS_ETXCSR		0x30	/* Early Transmit control/status Reg.*/
#define	DM9KS_TCCR		0x31	/* Checksum cntrol Reg. */
#define DM9KS_RCSR		0x32	/* Receive Checksum status Reg.*/
#define DM9KS_BUSCR		0x38
#define DM9KS_MRCMDX		0xf0
#define DM9KS_MRCMD		0xf2
#define DM9KS_MDRAL		0xf4
#define DM9KS_MDRAH		0xf5
#define DM9KS_MWCMD		0xf8
#define DM9KS_TXPLL		0xfc
#define DM9KS_TXPLH		0xfd
#define DM9KS_ISR		0xfe
#define DM9KS_IMR		0xff
/*---------------------------------------------*/
#define DM9KS_REG05		0x30	/* SKIP_CRC/SKIP_LONG */ 
#define DM9KS_REGFF		0xA3	/* IMR */
#define DM9KS_DISINTR		0x80

#define DM9KS_PHY		0x40	/* PHY address 0x01 */
#define DM9KS_PKT_RDY		0x01	/* Packet ready to receive */

/* Added for PXA of MAINSTONE */
#ifdef CONFIG_ARCH_MAINSTONE
#include <asm/arch/mainstone.h>
#define DM9KS_MIN_IO		(MST_ETH_PHYS + 0x300)
#define DM9KS_MAX_IO            (MST_ETH_PHYS + 0x370)
#define DM9K_IRQ		MAINSTONE_IRQ(3)
#else
#define DM9KS_MIN_IO		0x300
#define DM9KS_MAX_IO		0x370
#define DM9KS_IRQ		3
#endif

#define DM9KS_VID_L		0x28
#define DM9KS_VID_H		0x29
#define DM9KS_PID_L		0x2A
#define DM9KS_PID_H		0x2B

#define DM9KS_RX_INTR		0x01
#define DM9KS_TX_INTR		0x02
#define DM9KS_LINK_INTR		0x20

#define DM9KS_DWORD_MODE	1
#define DM9KS_BYTE_MODE		2
#define DM9KS_WORD_MODE		0

#define TRUE			1
#define FALSE			0
/* Number of continuous Rx packets */
#define CONT_RX_PKT_CNT		0xFFFF

#define DMFE_TIMER_WUT  jiffies+(HZ*5)	/* timer wakeup time : 5 second */

#if defined(DM9KS_DEBUG)
#define DMFE_DBUG(dbug_now, msg, vaule)\
if (dmfe_debug||dbug_now) printk(KERN_ERR "dmfe: %s %x\n", msg, vaule)
#else
#define DMFE_DBUG(dbug_now, msg, vaule)\
if (dbug_now) printk(KERN_ERR "dmfe: %s %x\n", msg, vaule)
#endif

#ifndef CONFIG_ARCH_MAINSTONE
#pragma pack(push, 1)
#endif

typedef struct _RX_DESC
{
	u8 rxbyte;
	u8 status;
	u16 length;
}RX_DESC;

typedef union{
	u8 buf[4];
	RX_DESC desc;
} rx_t;
#ifndef CONFIG_ARCH_MAINSTONE
#pragma pack(pop)
#endif

enum DM9KS_PHY_mode {
	DM9KS_10MHD   = 0, 
	DM9KS_100MHD  = 1, 
	DM9KS_10MFD   = 4,
	DM9KS_100MFD  = 5, 
	DM9KS_AUTO    = 8, 
};

/* Structure/enum declaration ------------------------------- */
typedef struct board_info { 
	u32 io_addr;/* Register I/O base address */
	u32 io_data;/* Data I/O address */
	u8 op_mode;/* PHY operation mode */
	u8 io_mode;/* 0:word, 2:byte */
	u8 Speed;	/* current speed */
	u8 chip_revision;
	int rx_csum;/* 0:disable, 1:enable */
	
	u32 reset_counter;/* counter: RESET */ 
	u32 reset_tx_timeout;/* RESET caused by TX Timeout */
	int tx_pkt_cnt;
	int cont_rx_pkt_cnt;/* current number of continuos rx packets  */
	struct net_device_stats stats;
	
	struct timer_list timer;
	unsigned char srom[128];
	spinlock_t lock;
	struct mii_if_info mii;
} board_info_t;
/* Global variable declaration ----------------------------- */
/*static int dmfe_debug = 0;*/
static struct net_device * dmfe_dev = NULL;
static struct ethtool_ops dmfe_ethtool_ops;
/* For module input parameter */
static int mode       = DM9KS_AUTO;  
static int media_mode = DM9KS_AUTO;
static int  irq        = DM9KS_IRQ;
static int iobase     = DM9KS_MIN_IO;

#if 0  // use physical address; Not virtual address
#ifdef outb
	#undef outb
#endif
#ifdef outw
	#undef outw
#endif
#ifdef outl
	#undef outl
#endif
#ifdef inb
	#undef inb
#endif
#ifdef inw
	#undef inw
#endif
#ifdef inl
	#undef inl
#endif
void outb(u8 reg, u32 ioaddr)
{
	(*(volatile u8 *)(ioaddr)) = reg;
}
void outw(u16 reg, u32 ioaddr)
{
	(*(volatile u16 *)(ioaddr)) = reg;
}
void outl(u32 reg, u32 ioaddr)
{
	(*(volatile u32 *)(ioaddr)) = reg;
}
u8 inb(u32 ioaddr)
{
	return (*(volatile u8 *)(ioaddr));
}
u16 inw(u32 ioaddr)
{
	return (*(volatile u16 *)(ioaddr));
}
u32 inl(u32 ioaddr)
{
	return (*(volatile u32 *)(ioaddr));
}
#endif

/* function declaration ------------------------------------- */
int dmfe_probe1(struct net_device *);
static int dmfe_open(struct net_device *);
static int dmfe_start_xmit(struct sk_buff *, struct net_device *);
static void dmfe_tx_done(unsigned long);
static void dmfe_packet_receive(struct net_device *);
static int dmfe_stop(struct net_device *);
static struct net_device_stats * dmfe_get_stats(struct net_device *); 
static int dmfe_do_ioctl(struct net_device *, struct ifreq *, int);
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
static void dmfe_interrupt(int , void *, struct pt_regs *); 
#else
	#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
	static irqreturn_t dmfe_interrupt(int , void *, struct pt_regs *);
	#else
	static irqreturn_t dmfe_interrupt(int , void *);/* for kernel 2.6.20 */
	#endif
#endif
static void dmfe_timer(unsigned long);
static void dmfe_init_dm9000(struct net_device *);
static unsigned long cal_CRC(unsigned char *, unsigned int, u8);
u8 ior(board_info_t *, int);
void iow(board_info_t *, int, u8);
static u16 phy_read(board_info_t *, int);
static void phy_write(board_info_t *, int, u16);
static u16 read_srom_word(board_info_t *, int);
static void dm9000_hash_table(struct net_device *);
static void dmfe_timeout(struct net_device *);
static void dmfe_reset(struct net_device *);
static int mdio_read(struct net_device *, int, int);
static void mdio_write(struct net_device *, int, int, int);
static void dmfe_get_drvinfo(struct net_device *, struct ethtool_drvinfo *);
static int dmfe_get_settings(struct net_device *, struct ethtool_cmd *);
static int dmfe_set_settings(struct net_device *, struct ethtool_cmd *);
static u32 dmfe_get_link(struct net_device *);
static int dmfe_nway_reset(struct net_device *);
static uint32_t dmfe_get_rx_csum(struct net_device *);
static uint32_t dmfe_get_tx_csum(struct net_device *);
static int dmfe_set_rx_csum(struct net_device *, uint32_t );
static int dmfe_set_tx_csum(struct net_device *, uint32_t );

#if defined(CHECKSUM)
static u8 check_rx_ready(u8);
#endif

#ifdef DM8606
#include "dm8606.h"
#endif

//DECLARE_TASKLET(dmfe_tx_tasklet,dmfe_tx_done,0);

/* DM9000 network baord routine ---------------------------- */

/*
  Search DM9000 board, allocate space and register it
*/

struct net_device * __init dmfe_probe(void)
{
	struct net_device *dev;
	int err;
	
	DMFE_DBUG(0, "dmfe_probe()",0);

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
	dev = init_etherdev(NULL, sizeof(struct board_info));
	//ether_setup(dev);		
#else
	dev= alloc_etherdev(sizeof(struct board_info));
#endif

	if(!dev)
		return ERR_PTR(-ENOMEM);

     	SET_MODULE_OWNER(dev);
	err = dmfe_probe1(dev);
	if (err)
		goto out;
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
	err = register_netdev(dev);
	if (err)
		goto out1;
#endif
	return dev;
out1:
	release_region(dev->base_addr,2);
out:
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
	kfree(dev);
#else
	free_netdev(dev);
#endif
	return ERR_PTR(err);
}

int __init dmfe_probe1(struct net_device *dev)
{
	struct board_info *db;    /* Point a board information structure */
	u32 id_val;
	u16 i, dm9000_found = FALSE;
	u8 MAC_addr[6]={0x00,0x60,0x6E,0x33,0x44,0x55};
	u8 HasEEPROM=0;
	DMFE_DBUG(0, "dmfe_probe1()",0);

	/* Search All DM9000 serial NIC */
	do {
		outb(DM9KS_VID_L, iobase);
		id_val = inb(iobase + 4);
		outb(DM9KS_VID_H, iobase);
		id_val |= inb(iobase + 4) << 8;
		outb(DM9KS_PID_L, iobase);
		id_val |= inb(iobase + 4) << 16;
		outb(DM9KS_PID_H, iobase);
		id_val |= inb(iobase + 4) << 24;

		if (id_val == DM9KS_ID || id_val == DM9010_ID) {
			
			/* Request IO from system */
			if(!request_region(iobase, 2, dev->name))
				return -ENODEV;

			printk(KERN_ERR"<DM9KS> I/O: %x, VID: %x \n",iobase, id_val);
			dm9000_found = TRUE;

			/* Allocated board information structure */
			memset(dev->priv, 0, sizeof(struct board_info));
			db = (board_info_t *)dev->priv;
			dmfe_dev    = dev;
			db->io_addr  = iobase;
			db->io_data = iobase + 4;   
			db->chip_revision = ior(db, DM9KS_CHIPR);
			
			/* driver system function */				
			dev->base_addr 		= iobase;
			dev->irq 		= irq;
			dev->open 		= &dmfe_open;
			dev->hard_start_xmit 	= &dmfe_start_xmit;
			dev->watchdog_timeo	= 5*HZ;	
			dev->tx_timeout		= dmfe_timeout;
			dev->stop 		= &dmfe_stop;
			dev->get_stats 		= &dmfe_get_stats;
			dev->set_multicast_list = &dm9000_hash_table;
			dev->do_ioctl 		= &dmfe_do_ioctl;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,28)
			dev->ethtool_ops = &dmfe_ethtool_ops;
#endif
#ifdef CHECKSUM
			dev->features |=  NETIF_F_IP_CSUM;
#endif
			db->mii.dev = dev;
			db->mii.mdio_read = mdio_read;
			db->mii.mdio_write = mdio_write;
			db->mii.phy_id = 1;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)
			db->mii.phy_id_mask = 0x1F; 
			db->mii.reg_num_mask = 0x1F; 
#endif
			//db->msg_enable =(debug == 0 ? DMFE_DEF_MSG_ENABLE : ((1 << debug) - 1));
			
			/* Read SROM content */
			for (i=0; i<64; i++)
				((u16 *)db->srom)[i] = read_srom_word(db, i);

			/* Get the PID and VID from EEPROM to check */
			id_val = (((u16 *)db->srom)[4])|(((u16 *)db->srom)[5]<<16); 
			printk("id_val=%x\n", id_val);
			if (id_val == DM9KS_ID || id_val == DM9010_ID) 
				HasEEPROM =1;
			
			/* Set Node Address */
			for (i=0; i<6; i++)
			{
				if (HasEEPROM) /* use EEPROM */
					dev->dev_addr[i] = db->srom[i];
				else	/* No EEPROM */
					dev->dev_addr[i] = MAC_addr[i];
			}
		}//end of if()
		iobase += 0x10;
	}while(!dm9000_found && iobase <= DM9KS_MAX_IO);

	return dm9000_found ? 0:-ENODEV;
}


/*
  Open the interface.
  The interface is opened whenever "ifconfig" actives it.
*/
static int dmfe_open(struct net_device *dev)
{
	board_info_t *db = (board_info_t *)dev->priv;
	u8 reg_nsr;
	int i;
	DMFE_DBUG(0, "dmfe_open", 0);

	if (request_irq(dev->irq,&dmfe_interrupt,0,dev->name,dev)) 
		return -EAGAIN;

	/* Initilize DM910X board */
	dmfe_init_dm9000(dev);
#ifdef DM8606
	// control DM8606
	printk("[8606]reg0=0x%04x\n",dm8606_read(db,0));
	printk("[8606]reg1=0x%04x\n",dm8606_read(db,0x1));
#endif 
	/* Init driver variable */
	db->reset_counter 	= 0;
	db->reset_tx_timeout 	= 0;
	db->cont_rx_pkt_cnt	= 0;
	
	/* check link state and media speed */
	db->Speed =10;
	i=0;
	do {
		reg_nsr = ior(db,DM9KS_NSR);
		if(reg_nsr & 0x40) /* link OK!! */
		{
			/* wait for detected Speed */
			mdelay(200);
			reg_nsr = ior(db,DM9KS_NSR);
			if(reg_nsr & 0x80)
				db->Speed =10;
			else
				db->Speed =100;
			break;
		}
		i++;
		mdelay(1);
	}while(i<3000);	/* wait 3 second  */
	//printk("i=%d  Speed=%d\n",i,db->Speed);	
	/* set and active a timer process */
	init_timer(&db->timer);
	db->timer.expires 	= DMFE_TIMER_WUT;
	db->timer.data 		= (unsigned long)dev;
	db->timer.function 	= &dmfe_timer;
	add_timer(&db->timer);	//Move to DM9000 initiallization was finished.
 	
	netif_start_queue(dev);

	return 0;
}

/* Set PHY operationg mode
*/
static void set_PHY_mode(board_info_t *db)
{
#ifndef DM8606
	u16 phy_reg0 = 0x1000;/* Auto-negotiation*/
	u16 phy_reg4 = 0x01e1;

	if ( !(db->op_mode & DM9KS_AUTO) ) // op_mode didn't auto sense */
	{ 
		switch(db->op_mode) {
			case DM9KS_10MHD:  phy_reg4 = 0x21; 
                        	           phy_reg0 = 0x1000;
					   break;
			case DM9KS_10MFD:  phy_reg4 = 0x41; 
					   phy_reg0 = 0x1100;
                                	   break;
			case DM9KS_100MHD: phy_reg4 = 0x81; 
					   phy_reg0 = 0x3000;
				    	   break;
			case DM9KS_100MFD: phy_reg4 = 0x101; 
					   phy_reg0 = 0x3100;
				   	   break;
			default: