transfer.help

gsac程序包

GSAC Command Reference Manual                                    TRANSFER

SUMMARY:
Apply or remove an instrument response/filter from the data
TRANSFER [FROM|TO] [POLEZERO pzfile] [FAPFILE fapfile] [EVAL afile pfile]
         [FREQLIMITS f1 f2 f3 f4] 

INPUT:
       
       
       FREQLIMITS f1 f2 f3 f4 : apply a cubic taper to the response such 
       	the response is 0 for f < f1 and for f > f4, 
       	the response is 1 for f > f2 and for f < f3, 
       	and tapers cubically from 0 to 1 for f1 < f < f2 and 
               f4 > f > f3.  Note the only way to turn this off is to 
               reset the limits as in FREQLIMITS -2 -1 1.0e5 1.0e6
		FREQLIMITS is only used in the FROM process. 
		This is essential for a clean deconvolution
DESCRIPTION:

SAC COMPATIBILITY:
       This does not support the manybuilt in instrument responses of
SAC. Instead the user must define the corresponding pole-zero or response
file.
	The EVAL option is different than SAC. Instead of working with a
seed database, GSAC expects the user to have already run 'evalresp' 
independently to create two files with names such as AMP.NM.SLM..BHZ,
and PHASE.NM.SLM..BHZ
	The FAP option is just prototyped at this time and not implemented
       
HEADER VALUES SET
	USER1 = permin, USER2=permax, where 
		permin=MAX[1.0/filt_f3,old permin] and
		permax=MIN[1./filt_f2,old permax]. This feature is used
		by sacmft96 and sacpom96
SEE ALSO:
       FILTER