panel.h

NT68521源代码

		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			1024
		#define PanelTypVTotal			525
		#define PanelMinVTotal			505//515
		#define PanelMinVSyncWidth      17
		#define PanelMinVSyncBackPorch  17
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		64000		//64KHz
		#define Use_TCON 		    	0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == AU_L170EN05

		#define PanelName				"AU_L170EN05\r\n"
		#define PanelXga                0
		#define PanelSxga               1
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Double pixels output 
		#define PanelDepth              6
		#define PanelSync_DE            0		//0=H/V 1=DE

		#define PanelWidth		1280
		#define PanelHeight		1024

		#define PanelMaxVFreq           75      // Hz
		#define PanelMinVFreq           56      // Hz
		#define PanelMaxHFreq           82000   // Hz

		#define PanelMaxPClk            140000   // KHz

		#define PanelMinHTotal          1500//1688
		#define PanelMaxHTotal          2046
		#define PanelMinHSyncWidth      80
		#define PanelMinHSyncBackPorch  80
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			2047
		#define PanelTypVTotal			1066
		#define PanelMinVTotal			1035//1040
		#define PanelMinVSyncWidth      3
		#define PanelMinVSyncBackPorch  7
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		64000		//64KHz
		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0x00
		#define Panel_Invert_DHS 		0x00
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == AU_M150XN05_1

		#define PanelName				"AU_M150XN05_1\r\n"
		#define PanelXga                1
		#define PanelSxga               0
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Double pixels output 
		#define PanelDepth              6
		#define PanelSync_DE			0		//0=H/V mode 1=DE mode
		#define PanelWidth				1024
		#define PanelHeight				768

		#define PanelMaxVFreq           76      // Hz
		#define PanelMinVFreq           50      // Hz
		#define PanelMaxHFreq           60000   // Hz

		#define PanelMaxPClk            80000   // KHz

		#define PanelMinHTotal          1200
		#define PanelMaxHTotal          1800
		#define PanelMinHSyncWidth      80
		#define PanelMinHSyncBackPorch  80
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			960
		#define PanelTypVTotal			806
		#define PanelMinVTotal			780
		#define PanelMinVSyncWidth      3
		#define PanelMinVSyncBackPorch  7
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		60000		//60KHz
		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == QD170E1

		#define PanelName				"QD170E1\r\n"
		#define PanelXga                0
		#define PanelSxga               1
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Double pixels output 
		#define PanelDepth              8
		#define PanelSync_DE            0		//0=H/V 1=DE

		#define PanelWidth				1280
		#define PanelHeight				1024

		#define PanelMaxVFreq           75      // Hz
		#define PanelMinVFreq           56      // Hz
		#define PanelMaxHFreq           82000   // Hz

		#define PanelMaxPClk            140000   // KHz

		#define PanelMinHTotal          1480//1460
		#define PanelMaxHTotal          1800//1688
		#define PanelMinHSyncWidth      60
		#define PanelMinHSyncBackPorch  60
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			2047
		#define PanelTypVTotal			1066
		#define PanelMinVTotal			1040
		#define PanelMinVSyncWidth      3
		#define PanelMinVSyncBackPorch  7
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		64000		//64KHz
		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333
		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == Samsung_LTM170E4_L01

		#define PanelName				"Samsung_LTM170E4_L01\r\n"
		#define PanelXga                0
		#define PanelSxga               1
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Double pixels output 
		#define PanelDepth              8
		#define PanelSync_DE            0		//0=H/V 1=DE

		#define PanelWidth				1280
		#define PanelHeight				1024

		#define PanelMaxVFreq           75      // Hz
		#define PanelMinVFreq           56      // Hz
		#define PanelMaxHFreq           82000   // Hz

		#define PanelMaxPClk            140000   // KHz

		#define PanelMinHTotal          1460
		#define PanelMaxHTotal          1688
		#define PanelMinHSyncWidth      60
		#define PanelMinHSyncBackPorch  60
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			1066
		#define PanelTypVTotal			1066
		#define PanelMinVTotal			1040
		#define PanelMinVSyncWidth      3
		#define PanelMinVSyncBackPorch  7
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		64000		//64KHz
		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == QD170ER01

		#define PanelName				"QD170ER01\r\n"
		#define PanelXga                0
		#define PanelSxga               1
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Double pixels output 
		#define PanelDepth              6
		#define PanelSync_DE            0		//0=H/V 1=DE

		#define PanelWidth				1280
		#define PanelHeight				1024

		#define PanelMaxVFreq           75      // Hz
		#define PanelMinVFreq           56      // Hz
		#define PanelMaxHFreq           82000   // Hz

		#define PanelMaxPClk            140000   // KHz

		#define PanelMinHTotal          1480//1460
		#define PanelMaxHTotal          1688
		#define PanelMinHSyncWidth      60
		#define PanelMinHSyncBackPorch  60
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			2047
		#define PanelTypVTotal			1066
		#define PanelMinVTotal			1040
		#define PanelMinVSyncWidth      3
		#define PanelMinVSyncBackPorch  7
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		64000		//64KHz
		#define Use_TCON 				1
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		25		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == HyundaiHT17E12_100

		#define PanelName				"HyundaiHT17E12_100\r\n"
		#define PanelXga                0
		#define PanelSxga               1
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Double pixels output 
		#define PanelDepth              6
		#define PanelSync_DE			0		//0=H/V mode 1=DE mode

		#define PanelWidth				1280
		#define PanelHeight				1024

		#define PanelMaxVFreq           75      // Hz
		#define PanelMinVFreq           50      // Hz