panel.h

NT68521源代码

		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == SINAI43140CBx_1

		#define PanelName				"SINAI43140CBx_1\r\n"
		#define PanelXga                0
		#define PanelSxga               1
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Double pixels output 
		#define PanelDepth              8
		#define PanelSync_DE		1

		#define PanelWidth		1280
		#define PanelHeight		1024

		#define PanelMaxVFreq           75      // Hz
		#define PanelMinVFreq           50      // Hz
		#define PanelMaxHFreq           62500   // Hz

		#define PanelMaxPClk            135000   // KHz

		#define PanelMinHTotal          1488
		#define PanelMaxHTotal          2400
		#define PanelMinHSyncWidth      80
		#define PanelMinHSyncBackPorch  80
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			2000
		#define PanelTypVTotal			1066
		#define PanelMinVTotal			1040
		#define PanelMinVSyncWidth      3
		#define PanelMinVSyncBackPorch  7
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		64000		//64KHz
		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == SINAI38951CBx

		#define PanelName				"SINAI38951CBx\r\n"
		#define PanelXga                0
		#define PanelSxga               1
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Double pixels output 
		#define PanelDepth              6
		#define PanelSync_DE			1

		#define PanelWidth				1400
		#define PanelHeight				1050

		#define PanelMaxVFreq           65      // Hz
		#define PanelMinVFreq           50      // Hz
		#define PanelMaxHFreq           76000   // Hz

		#define PanelMaxPClk            114000   // KHz

		#define PanelMinHTotal          1640
		#define PanelMaxHTotal          2046
		#define PanelMinHSyncWidth      80
		#define PanelMinHSyncBackPorch  80
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			2047
		#define PanelTypVTotal			1068
		#define PanelMinVTotal			1059
		#define PanelMinVSyncWidth      3
		#define PanelMinVSyncBackPorch  7
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		64000		//64KHz
		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0x00
		#define Panel_Invert_DHS 		0x00
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == SINAI38140CBx

		#define PanelName				"SINAI38140CBx\r\n"
		#define PanelXga                1
		#define PanelSxga               0
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     0       // Single pixels output 
		#define PanelDepth              8
		#define PanelSync_DE			0

		#define PanelWidth				1024
		#define PanelHeight				768

		#define PanelMaxVFreq           75      // Hz
		#define PanelMinVFreq           55      // Hz
		#define PanelMaxHFreq           60000   // Hz

		#define PanelMaxPClk            80000   // KHz

		#define PanelMinHTotal          1200
		#define PanelMaxHTotal          2500
		#define PanelMinHSyncWidth      80
		#define PanelMinHSyncBackPorch  80
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			1000
		#define PanelTypVTotal			806
		#define PanelMinVTotal			780
		#define PanelMinVSyncWidth      2
		#define PanelMinVSyncBackPorch  4
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		60000		//60KHz
		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == Sharp_LQ150X1DG51

		#define PanelName				"Sharp_LQ150X1DG51\r\n"
		#define PanelXga                1
		#define PanelSxga               0
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Dual pixels output 
		#define PanelDepth              6
		#define PanelSync_DE		0

		#define PanelWidth				1024
		#define PanelHeight				768

		#define PanelMaxVFreq           75      // Hz
		#define PanelMinVFreq           55      // Hz
		#define PanelMaxHFreq           60000   // Hz

		#define PanelMaxPClk            80000   // KHz

		#define PanelMinHTotal          1200
		#define PanelMaxHTotal          1720
		#define PanelMinHSyncWidth      80
		#define PanelMinHSyncBackPorch  80
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			990
		#define PanelTypVTotal			806
		#define PanelMinVTotal			780
		#define PanelMinVSyncWidth      3
		#define PanelMinVSyncBackPorch  7
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		60000		//60KHz
		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

    #endif

    #if PANEL == CMO_M170E4_L01

		#define PanelName				"CMO_M170E4_L01\r\n"
		#define PanelXga                0
		#define PanelSxga               1
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     1       // Double pixels output 
		#define PanelDepth              8
		#define PanelSync_DE            0		//0=H/V 1=DE

		#define PanelWidth				1280
		#define PanelHeight				1024

		#define PanelMaxVFreq           75      // Hz
		#define PanelMinVFreq           56      // Hz
		#define PanelMaxHFreq           82000   // Hz

		#define PanelMaxPClk            140000   // KHz

		#define PanelMinHTotal          1600
		#define PanelMaxHTotal          1920//2046
		#define PanelMinHSyncWidth      80
		#define PanelMinHSyncBackPorch  80
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
		#define PanelHSyncEnd			PanelHSyncStart + PanelMinHSyncWidth

		#define PanelMaxVTotal			1274//2047
		#define PanelTypVTotal			1066
		#define PanelMinVTotal			1040
		#define PanelMinVSyncWidth      3
		#define PanelMinVSyncBackPorch  7
		#define PanelVSyncStart			PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
		#define PanelVSyncEnd			PanelVSyncStart + PanelMinVSyncWidth

		#define FreeRunH_Freq    		64000		//64KHz
		#define Use_TCON 				0
		#define PanelShortHsync			0
		#define Panel_Invert_DVS 		0xff
		#define Panel_Invert_DHS 		0xff
		#define Panel_Invert_DCLK 		0x00
		#define Panel_Invert_DEN 		0x00
		#define PanelPadDrive 			0x0333

		#define Panel_Spread_Spect_En	0xff	// 0xff : enable spectrum
												// 0x00 : disable spectrum
		#define PanelSpreadSpectrumCtrl 0x00
		// Value for Spread_Spectrum_Control register
		// 0x00: 0.097% ... 0x07: 12.5%

		// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
		#define PowerUpPanelTiming		1		// 1 ms
		#define PowerUpInvTiming		250		// 250 ms
		#define PowerDownPanelTiming	1		// 1 ms
		#define PowerDownInvTiming		250		// 250 ms

 		#define yuv2rgbXsRGB2rgb{	\
			{  0x12A1,  0x0000,  0x1989 },	\
			{  0x12A1, -0x0644, -0x0D01 },	\
			{  0x12A1,  0x2046,  0x0000 }	\
		}

   #endif

    #if PANEL == V16C6448AC

		#define PanelName				"V16C6448AC\r\n"
		#define PanelXga                1
		#define PanelSxga               0
		#define PanelUxga               0
		#define PanelTwoPixelPerClk     0       // Double pixels output 
		#define PanelDepth              6
		#define PanelSync_DE            0		//0=H/V 1=DE

		#define PanelWidth	        	640
		#define PanelHeight	        	480

		#define PanelMaxVFreq           76      // Hz
		#define PanelMinVFreq           58      // Hz
		#define PanelMaxHFreq           33333   // Hz

		#define PanelMaxPClk            28000//28300   // KHz

		#define PanelMinHTotal          800//770
		#define PanelMaxHTotal          1024
		#define PanelMinHSyncWidth      72
		#define PanelMinHSyncBackPorch  72
		#define PanelHSyncStart			PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch