at91sam9263.h

试用于arm9 at91sram9260开发板的uboot程序

	AT91_REG	 SYS_DBGU_TNPR; 	/* Transmit Next Pointer Register */
	AT91_REG	 SYS_DBGU_TNCR; 	/* Transmit Next Counter Register */
	AT91_REG	 SYS_DBGU_PTCR; 	/* PDC Transfer Control Register */
	AT91_REG	 SYS_DBGU_PTSR; 	/* PDC Transfer Status Register */
	AT91_REG	 Reserved13[54]; 	/* */
	AT91_REG	 SYS_AIC_SMR[32]; 	/* Source Mode Register */
	AT91_REG	 SYS_AIC_SVR[32]; 	/* Source Vector Register */
	AT91_REG	 SYS_AIC_IVR; 	/* IRQ Vector Register */
	AT91_REG	 SYS_AIC_FVR; 	/* FIQ Vector Register */
	AT91_REG	 SYS_AIC_ISR; 	/* Interrupt Status Register */
	AT91_REG	 SYS_AIC_IPR; 	/* Interrupt Pending Register */
	AT91_REG	 SYS_AIC_IMR; 	/* Interrupt Mask Register */
	AT91_REG	 SYS_AIC_CISR; 	/* Core Interrupt Status Register */
	AT91_REG	 Reserved14[2]; 	/* */
	AT91_REG	 SYS_AIC_IECR; 	/* Interrupt Enable Command Register */
	AT91_REG	 SYS_AIC_IDCR; 	/* Interrupt Disable Command Register */
	AT91_REG	 SYS_AIC_ICCR; 	/* Interrupt Clear Command Register */
	AT91_REG	 SYS_AIC_ISCR; 	/* Interrupt Set Command Register */
	AT91_REG	 SYS_AIC_EOICR; 	/* End of Interrupt Command Register */
	AT91_REG	 SYS_AIC_SPU; 	/* Spurious Vector Register */
	AT91_REG	 SYS_AIC_DCR; 	/* Debug Control Register (Protect) */
	AT91_REG	 Reserved15[1]; 	/* */
	AT91_REG	 SYS_AIC_FFER; 	/* Fast Forcing Enable Register */
	AT91_REG	 SYS_AIC_FFDR; 	/* Fast Forcing Disable Register */
	AT91_REG	 SYS_AIC_FFSR; 	/* Fast Forcing Status Register */
	AT91_REG	 Reserved16[45]; 	/* */
	AT91_REG	 SYS_PIOA_PER; 	/* PIO Enable Register */
	AT91_REG	 SYS_PIOA_PDR; 	/* PIO Disable Register */
	AT91_REG	 SYS_PIOA_PSR; 	/* PIO Status Register */
	AT91_REG	 Reserved17[1]; 	/* */
	AT91_REG	 SYS_PIOA_OER; 	/* Output Enable Register */
	AT91_REG	 SYS_PIOA_ODR; 	/* Output Disable Registerr */
	AT91_REG	 SYS_PIOA_OSR; 	/* Output Status Register */
	AT91_REG	 Reserved18[1]; 	/* */
	AT91_REG	 SYS_PIOA_IFER; 	/* Input Filter Enable Register */
	AT91_REG	 SYS_PIOA_IFDR; 	/* Input Filter Disable Register */
	AT91_REG	 SYS_PIOA_IFSR; 	/* Input Filter Status Register */
	AT91_REG	 Reserved19[1]; 	/* */
	AT91_REG	 SYS_PIOA_SODR; 	/* Set Output Data Register */
	AT91_REG	 SYS_PIOA_CODR; 	/* Clear Output Data Register */
	AT91_REG	 SYS_PIOA_ODSR; 	/* Output Data Status Register */
	AT91_REG	 SYS_PIOA_PDSR; 	/* Pin Data Status Register */
	AT91_REG	 SYS_PIOA_IER; 	/* Interrupt Enable Register */
	AT91_REG	 SYS_PIOA_IDR; 	/* Interrupt Disable Register */
	AT91_REG	 SYS_PIOA_IMR; 	/* Interrupt Mask Register */
	AT91_REG	 SYS_PIOA_ISR; 	/* Interrupt Status Register */
	AT91_REG	 SYS_PIOA_MDER; 	/* Multi-driver Enable Register */
	AT91_REG	 SYS_PIOA_MDDR; 	/* Multi-driver Disable Register */
	AT91_REG	 SYS_PIOA_MDSR; 	/* Multi-driver Status Register */
	AT91_REG	 Reserved20[1]; 	/* */
	AT91_REG	 SYS_PIOA_PPUDR; 	/* Pull-up Disable Register */
	AT91_REG	 SYS_PIOA_PPUER; 	/* Pull-up Enable Register */
	AT91_REG	 SYS_PIOA_PPUSR; 	/* Pull-up Status Register */
	AT91_REG	 Reserved21[1]; 	/* */
	AT91_REG	 SYS_PIOA_ASR; 	/* Select A Register */
	AT91_REG	 SYS_PIOA_BSR; 	/* Select B Register */
	AT91_REG	 SYS_PIOA_ABSR; 	/* AB Select Status Register */
	AT91_REG	 Reserved22[9]; 	/* */
	AT91_REG	 SYS_PIOA_OWER; 	/* Output Write Enable Register */
	AT91_REG	 SYS_PIOA_OWDR; 	/* Output Write Disable Register */
	AT91_REG	 SYS_PIOA_OWSR; 	/* Output Write Status Register */
	AT91_REG	 Reserved23[85]; 	/* */
	AT91_REG	 SYS_PIOB_PER; 	/* PIO Enable Register */
	AT91_REG	 SYS_PIOB_PDR; 	/* PIO Disable Register */
	AT91_REG	 SYS_PIOB_PSR; 	/* PIO Status Register */
	AT91_REG	 Reserved24[1]; 	/* */
	AT91_REG	 SYS_PIOB_OER; 	/* Output Enable Register */
	AT91_REG	 SYS_PIOB_ODR; 	/* Output Disable Registerr */
	AT91_REG	 SYS_PIOB_OSR; 	/* Output Status Register */
	AT91_REG	 Reserved25[1]; 	/* */
	AT91_REG	 SYS_PIOB_IFER; 	/* Input Filter Enable Register */
	AT91_REG	 SYS_PIOB_IFDR; 	/* Input Filter Disable Register */
	AT91_REG	 SYS_PIOB_IFSR; 	/* Input Filter Status Register */
	AT91_REG	 Reserved26[1]; 	/* */
	AT91_REG	 SYS_PIOB_SODR; 	/* Set Output Data Register */
	AT91_REG	 SYS_PIOB_CODR; 	/* Clear Output Data Register */
	AT91_REG	 SYS_PIOB_ODSR; 	/* Output Data Status Register */
	AT91_REG	 SYS_PIOB_PDSR; 	/* Pin Data Status Register */
	AT91_REG	 SYS_PIOB_IER; 	/* Interrupt Enable Register */
	AT91_REG	 SYS_PIOB_IDR; 	/* Interrupt Disable Register */
	AT91_REG	 SYS_PIOB_IMR; 	/* Interrupt Mask Register */
	AT91_REG	 SYS_PIOB_ISR; 	/* Interrupt Status Register */
	AT91_REG	 SYS_PIOB_MDER; 	/* Multi-driver Enable Register */
	AT91_REG	 SYS_PIOB_MDDR; 	/* Multi-driver Disable Register */
	AT91_REG	 SYS_PIOB_MDSR; 	/* Multi-driver Status Register */
	AT91_REG	 Reserved27[1]; 	/* */
	AT91_REG	 SYS_PIOB_PPUDR; 	/* Pull-up Disable Register */
	AT91_REG	 SYS_PIOB_PPUER; 	/* Pull-up Enable Register */
	AT91_REG	 SYS_PIOB_PPUSR; 	/* Pull-up Status Register */
	AT91_REG	 Reserved28[1]; 	/* */
	AT91_REG	 SYS_PIOB_ASR; 	/* Select A Register */
	AT91_REG	 SYS_PIOB_BSR; 	/* Select B Register */
	AT91_REG	 SYS_PIOB_ABSR; 	/* AB Select Status Register */
	AT91_REG	 Reserved29[9]; 	/* */
	AT91_REG	 SYS_PIOB_OWER; 	/* Output Write Enable Register */
	AT91_REG	 SYS_PIOB_OWDR; 	/* Output Write Disable Register */
	AT91_REG	 SYS_PIOB_OWSR; 	/* Output Write Status Register */
	AT91_REG	 Reserved30[85]; 	/* */
	AT91_REG	 SYS_PIOC_PER; 	/* PIO Enable Register */
	AT91_REG	 SYS_PIOC_PDR; 	/* PIO Disable Register */
	AT91_REG	 SYS_PIOC_PSR; 	/* PIO Status Register */
	AT91_REG	 Reserved31[1]; 	/* */
	AT91_REG	 SYS_PIOC_OER; 	/* Output Enable Register */
	AT91_REG	 SYS_PIOC_ODR; 	/* Output Disable Registerr */
	AT91_REG	 SYS_PIOC_OSR; 	/* Output Status Register */
	AT91_REG	 Reserved32[1]; 	/* */
	AT91_REG	 SYS_PIOC_IFER; 	/* Input Filter Enable Register */
	AT91_REG	 SYS_PIOC_IFDR; 	/* Input Filter Disable Register */
	AT91_REG	 SYS_PIOC_IFSR; 	/* Input Filter Status Register */
	AT91_REG	 Reserved33[1]; 	/* */
	AT91_REG	 SYS_PIOC_SODR; 	/* Set Output Data Register */
	AT91_REG	 SYS_PIOC_CODR; 	/* Clear Output Data Register */
	AT91_REG	 SYS_PIOC_ODSR; 	/* Output Data Status Register */
	AT91_REG	 SYS_PIOC_PDSR; 	/* Pin Data Status Register */
	AT91_REG	 SYS_PIOC_IER; 	/* Interrupt Enable Register */
	AT91_REG	 SYS_PIOC_IDR; 	/* Interrupt Disable Register */
	AT91_REG	 SYS_PIOC_IMR; 	/* Interrupt Mask Register */
	AT91_REG	 SYS_PIOC_ISR; 	/* Interrupt Status Register */
	AT91_REG	 SYS_PIOC_MDER; 	/* Multi-driver Enable Register */
	AT91_REG	 SYS_PIOC_MDDR; 	/* Multi-driver Disable Register */
	AT91_REG	 SYS_PIOC_MDSR; 	/* Multi-driver Status Register */
	AT91_REG	 Reserved34[1]; 	/* */
	AT91_REG	 SYS_PIOC_PPUDR; 	/* Pull-up Disable Register */
	AT91_REG	 SYS_PIOC_PPUER; 	/* Pull-up Enable Register */
	AT91_REG	 SYS_PIOC_PPUSR; 	/* Pull-up Status Register */
	AT91_REG	 Reserved35[1]; 	/* */
	AT91_REG	 SYS_PIOC_ASR; 	/* Select A Register */
	AT91_REG	 SYS_PIOC_BSR; 	/* Select B Register */
	AT91_REG	 SYS_PIOC_ABSR; 	/* AB Select Status Register */
	AT91_REG	 Reserved36[9]; 	/* */
	AT91_REG	 SYS_PIOC_OWER; 	/* Output Write Enable Register */
	AT91_REG	 SYS_PIOC_OWDR; 	/* Output Write Disable Register */
	AT91_REG	 SYS_PIOC_OWSR; 	/* Output Write Status Register */
	AT91_REG	 Reserved37[85]; 	/* */
	AT91_REG	 SYS_PIOD_PER; 	/* PIO Enable Register */
	AT91_REG	 SYS_PIOD_PDR; 	/* PIO Disable Register */
	AT91_REG	 SYS_PIOD_PSR; 	/* PIO Status Register */
	AT91_REG	 Reserved38[1]; 	/* */
	AT91_REG	 SYS_PIOD_OER; 	/* Output Enable Register */
	AT91_REG	 SYS_PIOD_ODR; 	/* Output Disable Registerr */
	AT91_REG	 SYS_PIOD_OSR; 	/* Output Status Register */
	AT91_REG	 Reserved39[1]; 	/* */
	AT91_REG	 SYS_PIOD_IFER; 	/* Input Filter Enable Register */
	AT91_REG	 SYS_PIOD_IFDR; 	/* Input Filter Disable Register */
	AT91_REG	 SYS_PIOD_IFSR; 	/* Input Filter Status Register */
	AT91_REG	 Reserved40[1]; 	/* */
	AT91_REG	 SYS_PIOD_SODR; 	/* Set Output Data Register */
	AT91_REG	 SYS_PIOD_CODR; 	/* Clear Output Data Register */
	AT91_REG	 SYS_PIOD_ODSR; 	/* Output Data Status Register */
	AT91_REG	 SYS_PIOD_PDSR; 	/* Pin Data Status Register */
	AT91_REG	 SYS_PIOD_IER; 	/* Interrupt Enable Register */
	AT91_REG	 SYS_PIOD_IDR; 	/* Interrupt Disable Register */
	AT91_REG	 SYS_PIOD_IMR; 	/* Interrupt Mask Register */
	AT91_REG	 SYS_PIOD_ISR; 	/* Interrupt Status Register */
	AT91_REG	 SYS_PIOD_MDER; 	/* Multi-driver Enable Register */
	AT91_REG	 SYS_PIOD_MDDR; 	/* Multi-driver Disable Register */
	AT91_REG	 SYS_PIOD_MDSR; 	/* Multi-driver Status Register */
	AT91_REG	 Reserved41[1]; 	/* */
	AT91_REG	 SYS_PIOD_PPUDR; 	/* Pull-up Disable Register */
	AT91_REG	 SYS_PIOD_PPUER; 	/* Pull-up Enable Register */
	AT91_REG	 SYS_PIOD_PPUSR; 	/* Pull-up Status Register */
	AT91_REG	 Reserved42[1]; 	/* */
	AT91_REG	 SYS_PIOD_ASR; 	/* Select A Register */
	AT91_REG	 SYS_PIOD_BSR; 	/* Select B Register */
	AT91_REG	 SYS_PIOD_ABSR; 	/* AB Select Status Register */
	AT91_REG	 Reserved43[9]; 	/* */
	AT91_REG	 SYS_PIOD_OWER; 	/* Output Write Enable Register */
	AT91_REG	 SYS_PIOD_OWDR; 	/* Output Write Disable Register */
	AT91_REG	 SYS_PIOD_OWSR; 	/* Output Write Status Register */
	AT91_REG	 Reserved44[85]; 	/* */
	AT91_REG	 SYS_PIOE_PER; 	/* PIO Enable Register */
	AT91_REG	 SYS_PIOE_PDR; 	/* PIO Disable Register */
	AT91_REG	 SYS_PIOE_PSR; 	/* PIO Status Register */
	AT91_REG	 Reserved45[1]; 	/* */
	AT91_REG	 SYS_PIOE_OER; 	/* Output Enable Register */
	AT91_REG	 SYS_PIOE_ODR; 	/* Output Disable Registerr */
	AT91_REG	 SYS_PIOE_OSR; 	/* Output Status Register */
	AT91_REG	 Reserved46[1]; 	/* */
	AT91_REG	 SYS_PIOE_IFER; 	/* Input Filter Enable Register */