fet430_wdt01.c

来自「德州仪器(TI) 的超低功耗16 位RISC 混合信号处理器的MSP430 平台」· C语言 代码 · 共 41 行

//******************************************************************************
//  MSP-FET430P430 Demo - WDT Toggle P5.1 Interval overflow ISR, DCO SMCLK 
//
//  Description; Toggle P5.1 using software timed by the WDT ISR. Toggle rate 
//  is approximately 31ms based on default ~ 1.084 Mhz DCO/SMCLK clock source 
//  used in this example for the WDT.  
//  ACLK = n/a, MCLK = SMCLK = default DCO = 32xACLK = 1.048576Mhz
//
//		  MSP430FG439
//             -----------------
//         /|\|              XIN|-  
//          | |                 |
//          --|RST          XOUT|-
//            |                 |
//            |             P5.1|-->LED
//
//  M.Buccini
//  Texas Instruments, Inc
//  June 2004
//  Built with IAR Embedded Workbench Version: 2.21B
//******************************************************************************

#include  <msp430xG43x.h>

void main(void)
{ 
  WDTCTL = WDT_MDLY_32;                 // Set Watchdog Timer interval to ~31ms
  IE1 |= WDTIE;                         // Enable WDT interrupt
  P5DIR |= 0x02;                        // Set P5.1 to output direction

  _BIS_SR(LPM0_bits + GIE);             // Enter LPM0 w/ interrupt
}

// Watchdog Timer interrupt service routine
#pragma vector=WDT_VECTOR
__interrupt void watchdog_timer(void)
{
  P5OUT ^= 0x02;                        // Toggle P5.1 using exclusive-OR
}