common_atheros_sdiostack_ar6000_wlan.patch

ar6k 的WIFI驱动

+                          A_UINT32 targ_reply_arg);
+void ar6000_dset_close(void *devt, A_UINT32 access_cookie);
+void ar6000_dset_data_req(void *devt,
+                          A_UINT32 access_cookie,
+                          A_UINT32 offset,
+                          A_UINT32 length,
+                          A_UINT32 targ_buf,
+                          A_UINT32 targ_reply_fn,
+                          A_UINT32 targ_reply_arg);
+
+void ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values);
+void ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value);
+void ar6000_gpio_ack_rx(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _AR6000_API_H_ */
Index: linux-2.6.18/drivers/sdio/function/wlan/ar6000/include/athdrv.h
===================================================================
--- /dev/null
+++ linux-2.6.18/drivers/sdio/function/wlan/ar6000/include/athdrv.h
@@ -0,0 +1,598 @@
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ *
+ *  Wireless Network driver for Atheros AR6001
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *
+ * This file contains the definitions for the AR6000 linux driver.
+ *
+ */
+
+#ifndef _ATHDRV_H_
+#define _ATHDRV_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+ * There are two types of ioctl's here: Standard ioctls and
+ * eXtended ioctls.  All extended ioctls (XIOCTL) are multiplexed
+ * off of the single ioctl command, AR6000_IOCTL_EXTENDED.  The
+ * arguments for every XIOCTL starts with a 32-bit command word
+ * that is used to select which extended ioctl is in use.  After
+ * the command word are command-specific arguments.
+ */
+
+/* Linux standard Wireless Extensions, private ioctl interfaces */
+#define IEEE80211_IOCTL_SETPARAM             (SIOCIWFIRSTPRIV+0)
+#define IEEE80211_IOCTL_GETPARAM             (SIOCIWFIRSTPRIV+1)
+#define IEEE80211_IOCTL_SETKEY               (SIOCIWFIRSTPRIV+2)
+#define IEEE80211_IOCTL_SETWMMPARAMS         (SIOCIWFIRSTPRIV+3)
+#define IEEE80211_IOCTL_DELKEY               (SIOCIWFIRSTPRIV+4)
+#define IEEE80211_IOCTL_GETWMMPARAMS         (SIOCIWFIRSTPRIV+5)
+#define IEEE80211_IOCTL_SETMLME              (SIOCIWFIRSTPRIV+6)
+#define IEEE80211_IOCTL_SETOPTIE             (SIOCIWFIRSTPRIV+6)
+#define IEEE80211_IOCTL_GETOPTIE             (SIOCIWFIRSTPRIV+7)
+#define IEEE80211_IOCTL_ADDPMKID             (SIOCIWFIRSTPRIV+8)
+//#define IEEE80211_IOCTL_SETAUTHALG           (SIOCIWFIRSTPRIV+10)
+#define IEEE80211_IOCTL_LASTONE              (SIOCIWFIRSTPRIV+9)
+
+
+
+/*                      ====WMI Ioctls====                                    */
+/*
+ *
+ * Many ioctls simply provide WMI services to application code:
+ * an application makes such an ioctl call with a set of arguments
+ * that are packaged into the corresponding WMI message, and sent
+ * to the Target.
+ */
+
+#define AR6000_IOCTL_WMI_GETREV              (SIOCIWFIRSTPRIV+10)
+/*
+ * arguments:
+ *   ar6000_version *revision
+ */
+
+#define AR6000_IOCTL_WMI_SETPWR              (SIOCIWFIRSTPRIV+11)
+/*
+ * arguments:
+ *   WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h)
+ * uses: WMI_SET_POWER_MODE_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETSCAN             (SIOCIWFIRSTPRIV+12)
+/*
+ * arguments:
+ *   WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h)
+ * uses: WMI_SET_SCAN_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETLISTENINT        (SIOCIWFIRSTPRIV+13)
+/*
+ * arguments:
+ *   UINT32 listenInterval
+ * uses: WMI_SET_LISTEN_INT_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETBSSFILTER        (SIOCIWFIRSTPRIV+14)
+/*
+ * arguments:
+ *   WMI_BSS_FILTER filter (see include/wmi.h)
+ * uses: WMI_SET_BSS_FILTER_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS   (SIOCIWFIRSTPRIV+16)
+/*
+ * arguments:
+ *   WMI_CHANNEL_PARAMS_CMD chParams
+ * uses: WMI_SET_CHANNEL_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_PROBEDSSID      (SIOCIWFIRSTPRIV+17)
+/*
+ * arguments:
+ *   WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h)
+ * uses: WMI_SETPROBED_SSID_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_PMPARAMS        (SIOCIWFIRSTPRIV+18)
+/*
+ * arguments:
+ *   WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h)
+ * uses: WMI_SET_POWER_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_BADAP           (SIOCIWFIRSTPRIV+19)
+/*
+ * arguments:
+ *   WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h)
+ * uses: WMI_ADD_BAD_AP_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_GET_QOS_QUEUE       (SIOCIWFIRSTPRIV+20)
+/*
+ * arguments:
+ *   ar6000_queuereq queueRequest (see below)
+ */
+
+#define AR6000_IOCTL_WMI_CREATE_QOS          (SIOCIWFIRSTPRIV+21)
+/*
+ * arguments:
+ *   WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h)
+ * uses: WMI_CREATE_PSTREAM_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_DELETE_QOS          (SIOCIWFIRSTPRIV+22)
+/*
+ * arguments:
+ *   WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h)
+ * uses: WMI_DELETE_PSTREAM_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_LINKTHRESHOLD   (SIOCIWFIRSTPRIV+23)
+/*
+ * arguments:
+ *   WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24)
+/*
+ * arguments:
+ *   WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h)
+ * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_GET_TARGET_STATS    (SIOCIWFIRSTPRIV+25)
+/*
+ * arguments:
+ *   TARGET_STATS *targetStats (see below)
+ * uses: WMI_GET_STATISTICS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ASSOC_INFO      (SIOCIWFIRSTPRIV+26)
+/*
+ * arguments:
+ *   WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd
+ * uses: WMI_SET_ASSOC_INFO_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS   (SIOCIWFIRSTPRIV+27)
+/*
+ * arguments:
+ *   WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h)
+ * uses: WMI_SET_ACCESS_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_BMISS_TIME      (SIOCIWFIRSTPRIV+28)
+/*
+ * arguments:
+ *   UINT32 beaconMissTime
+ * uses: WMI_SET_BMISS_TIME_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT    (SIOCIWFIRSTPRIV+29)
+/*
+ * arguments:
+ *   WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h)
+ * uses: WMI_SET_DISC_TIMEOUT_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS    (SIOCIWFIRSTPRIV+30)
+/*
+ * arguments:
+ *   WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd
+ * uses: WMI_SET_IBSS_PM_CAPS_CMDID
+ */
+
+/*
+ * There is a very small space available for driver-private
+ * wireless ioctls.  In order to circumvent this limitation,
+ * we multiplex a bunch of ioctls (XIOCTLs) on top of a
+ * single AR6000_IOCTL_EXTENDED ioctl.
+ */
+#define AR6000_IOCTL_EXTENDED                (SIOCIWFIRSTPRIV+31)
+
+
+/*                         ====BMI Extended Ioctls====                        */
+
+#define AR6000_XIOCTL_BMI_DONE                 1
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_DONE)
+ * uses: BMI_DONE
+ */
+
+#define AR6000_XIOCTL_BMI_READ_MEMORY          2
+/*
+ * arguments:
+ *   union {
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY)
+ *       UINT32 address
+ *       UINT32 length
+ *     }
+ *     char results[length]
+ *   }
+ * uses: BMI_READ_MEMORY
+ */
+
+#define AR6000_XIOCTL_BMI_WRITE_MEMORY         3
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY)
+ *   UINT32 address
+ *   UINT32 length
+ *   char data[length]
+ * uses: BMI_WRITE_MEMORY
+ */
+
+#define AR6000_XIOCTL_BMI_EXECUTE              4
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE)
+ *   UINT32 TargetAddress
+ *   UINT32 parameter
+ * uses: BMI_EXECUTE
+ */
+
+#define AR6000_XIOCTL_BMI_SET_APP_START        5
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START)
+ *   UINT32 TargetAddress
+ * uses: BMI_SET_APP_START
+ */
+
+#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER    6
+/*
+ * arguments:
+ *   union {
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER)
+ *       UINT32 TargetAddress, 32-bit aligned
+ *     }
+ *     UINT32 result
+ *   }
+ * uses: BMI_READ_SOC_REGISTER
+ */
+
+#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER   7
+/*
+ * arguments:
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER)
+ *       UINT32 TargetAddress, 32-bit aligned
+ *       UINT32 newValue
+ *     }
+ * uses: BMI_WRITE_SOC_REGISTER
+ */
+
+#define AR6000_XIOCTL_BMI_TEST                 8
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_BMI_TEST)
+ *   UINT32 address
+ *   UINT32 length
+ *   UINT32 count
+ */
+
+
+
+/*                      ====DataSet Extended Ioctls====                       */
+
+#define AR6000_XIOCTL_WMI_DSET_WAIT_REQ        9
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_DSET_WAIT_REQ)
+ */
+
+#define AR6000_XIOCTL_WMI_DSET_OPEN_REPLY     10
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_DSET_OPEN_REPLY)
+ *   dset_open_reply_t (see host/include/app/dset.h)
+ * uses: WMIX_DSETOPEN_REPLY_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_DSET_DATA_REPLY     11
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_WMI_DSET_DATA_REPLY)
+ *   dset_data_reply_t (see host/include/app/dset.h)
+ * uses: WMIX_DSETDATA_REPLY_CMDID
+ */
+
+#define AR6000_XIOCTL_FORCE_TARGET_RESET      12
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET)
+ */
+
+
+#ifdef HTC_RAW_INTERFACE
+/* HTC Raw Interface Ioctls */
+#define AR6000_XIOCTL_HTC_RAW_OPEN            13
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN)
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_CLOSE           14
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE)
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_READ            15
+/*
+ * arguments:
+ *   union {
+ *     struct {
+ *       UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ)
+ *       UINT32 mailboxID
+ *       UINT32 length
+ *     }
+ *     results[length]
+ *   }
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_WRITE           16
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE)
+ *   UINT32 mailboxID
+ *   UINT32 length
+ *   char buffer[length]
+ */
+#endif /* HTC_RAW_INTERFACE */
+
+#define AR6000_XIOCTL_CHECK_TARGET_READY      17
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY)
+ */
+
+
+
+/*                ====GPIO (General Purpose I/O) Extended Ioctls====          */
+
+#define AR6000_XIOCTL_GPIO_OUTPUT_SET         18
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET)
+ *   ar6000_gpio_output_set_cmd_s (see below)
+ * uses: WMIX_GPIO_OUTPUT_SET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INPUT_GET          19
+/*
+ * arguments:
+ *   UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET)
+ * uses: WMIX_GPIO_INPUT_GET_CMDID