test.c

Atheros wifi driver source code

				ahp.ah_opmode = HAL_M_IBSS;
			else if (strncasecmp(optarg, "adhoc", 2) == 0)
				ahp.ah_opmode = HAL_M_IBSS;
			else if (strncasecmp(optarg, "ap", 2) == 0)
				ahp.ah_opmode = HAL_M_HOSTAP;
			else if (strncasecmp(optarg, "hostap", 2) == 0)
				ahp.ah_opmode = HAL_M_HOSTAP;
			else if (strncasecmp(optarg, "monitor", 2) == 0)
				ahp.ah_opmode = HAL_M_MONITOR;
			else
				usage(argv[0]);
			break;
		case 'p':
			dopassive = 1;
			break;
		case 'A':
			modes |= HAL_MODE_11A;
			break;
		case 'B':
			modes |= HAL_MODE_11B;
			break;
		case 'G':
			modes |= HAL_MODE_11G;
			break;
		case 'T':
			modes |= HAL_MODE_TURBO;
			break;
		case 'q':
			verbose = 0;
			break;
		case 'v':
			verbose++;
			break;
		default:
			usage(argv[0]);
		}
	if (modes == 0)
		modes = HAL_MODE_11A | HAL_MODE_11B |
			HAL_MODE_11G | HAL_MODE_TURBO;

	for (i = 0; i < N(allCountries); i++) {
		ahp.ah_currentRD = allCountries[i].regDmnEnum;
		runtest(&ahp, allCountries[i].countryCode,
			modes, outdoor, extendedChanMode);
	}
	for (i = 0; i < N(domains); i++) {
		ahp.ah_currentRD = domains[i].rd;
		runtest(&ahp, CTRY_DEFAULT, modes, outdoor, extendedChanMode);
	}
	return (0);
}

/*
 * Search a list for a specified value v that is within
 * EEP_DELTA of the search values.  Return the closest
 * values in the list above and below the desired value.
 * EEP_DELTA is a factional value; everything is scaled
 * so only integer arithmetic is used.
 *
 * NB: the input list is assumed to be sorted in ascending order
 */
static void
ar5212GetLowerUpperValues(u_int16_t v, u_int16_t *lp, u_int16_t listSize,
                          u_int16_t *vlo, u_int16_t *vhi)
{
	u_int32_t target = v * EEP_SCALE;
	u_int16_t *ep = lp+listSize;

	/*
	 * Check first and last elements for out-of-bounds conditions.
	 */
	if (target < (u_int32_t)(lp[0] * EEP_SCALE - EEP_DELTA)) {
		*vlo = *vhi = lp[0];
		return;
	}
	if (target > (u_int32_t)(ep[-1] * EEP_SCALE + EEP_DELTA)) {
		*vlo = *vhi = ep[-1];
		return;
	}

	/* look for value being near or between 2 values in list */
	for (; lp < ep; lp++) {
		/*
		 * If value is close to the current value of the list
		 * then target is not between values, it is one of the values
		 */
		if (abs(lp[0] * EEP_SCALE - target) < EEP_DELTA) {
			*vlo = *vhi = lp[0];
			return;
		}
		/*
		 * Look for value being between current value and next value
		 * if so return these 2 values
		 */
		if (target < (u_int32_t)(lp[1] * EEP_SCALE - EEP_DELTA)) {
			*vlo = lp[0];
			*vhi = lp[1];
			return;
		}
	}
}

/*
 * Find the maximum conformance test limit for the given channel and CTL info
 */
static u_int16_t
ar5212GetMaxEdgePower(u_int16_t channel, RD_EDGES_POWER *pRdEdgesPower)
{
	/* temp array for holding edge channels */
	u_int16_t tempChannelList[NUM_EDGES];
	u_int16_t clo, chi, twiceMaxEdgePower;
	int i, numEdges;

	/* Get the edge power */
	for (i = 0; i < NUM_EDGES; i++) {
		if (pRdEdgesPower[i].rdEdge == 0)
			break;
		tempChannelList[i] = pRdEdgesPower[i].rdEdge;
	}
	numEdges = i;

	ar5212GetLowerUpperValues(channel, tempChannelList,
		numEdges, &clo, &chi);
	/* Get the index for the lower channel */
	for (i = 0; i < numEdges && clo != tempChannelList[i]; i++)
		;
	/* Is lower channel ever outside the rdEdge? */
	HALASSERT(i != numEdges);

	if ((clo == chi && clo == channel) || (pRdEdgesPower[i].flag)) {
		/* 
		 * If there's an exact channel match or an inband flag set
		 * on the lower channel use the given rdEdgePower 
		 */
		twiceMaxEdgePower = pRdEdgesPower[i].twice_rdEdgePower;
		HALASSERT(twiceMaxEdgePower > 0);
	} else
		twiceMaxEdgePower = MAX_RATE_POWER;
	return twiceMaxEdgePower;
}

/*
 * Returns interpolated or the scaled up interpolated value
 */
static u_int16_t
interpolate(u_int16_t target, u_int16_t srcLeft, u_int16_t srcRight,
	u_int16_t targetLeft, u_int16_t targetRight)
{
	u_int16_t rv;
	int16_t lRatio;

	/* to get an accurate ratio, always scale, if want to scale, then don't scale back down */
	if ((targetLeft * targetRight) == 0)
		return 0;

	if (srcRight != srcLeft) {
		/*
		 * Note the ratio always need to be scaled,
		 * since it will be a fraction.
		 */
		lRatio = (target - srcLeft) * EEP_SCALE / (srcRight - srcLeft);
		if (lRatio < 0) {
		    /* Return as Left target if value would be negative */
		    rv = targetLeft;
		} else if (lRatio > EEP_SCALE) {
		    /* Return as Right target if Ratio is greater than 100% (SCALE) */
		    rv = targetRight;
		} else {
			rv = (lRatio * targetRight + (EEP_SCALE - lRatio) *
					targetLeft) / EEP_SCALE;
		}
	} else {
		rv = targetLeft;
	}
	return rv;
}

/*
 * Return the four rates of target power for the given target power table 
 * channel, and number of channels
 */
static void
ar5212GetTargetPowers(struct ath_hal *ah, HAL_CHANNEL *chan,
	TRGT_POWER_INFO *powInfo,
	u_int16_t numChannels, TRGT_POWER_INFO *pNewPower)
{
	/* temp array for holding target power channels */
	u_int16_t tempChannelList[NUM_TEST_FREQUENCIES];
	u_int16_t clo, chi, ixlo, ixhi;
	int i;

	/* Copy the target powers into the temp channel list */
	for (i = 0; i < numChannels; i++)
		tempChannelList[i] = powInfo[i].testChannel;

	ar5212GetLowerUpperValues(chan->channel, tempChannelList,
		numChannels, &clo, &chi);

	/* Get the indices for the channel */
	ixlo = ixhi = 0;
	for (i = 0; i < numChannels; i++) {
		if (clo == tempChannelList[i]) {
			ixlo = i;
		}
		if (chi == tempChannelList[i]) {
			ixhi = i;
			break;
		}
	}

	/*
	 * Get the lower and upper channels, target powers,
	 * and interpolate between them.
	 */
	pNewPower->twicePwr6_24 = interpolate(chan->channel, clo, chi,
		powInfo[ixlo].twicePwr6_24, powInfo[ixhi].twicePwr6_24);
	pNewPower->twicePwr36 = interpolate(chan->channel, clo, chi,
		powInfo[ixlo].twicePwr36, powInfo[ixhi].twicePwr36);
	pNewPower->twicePwr48 = interpolate(chan->channel, clo, chi,
		powInfo[ixlo].twicePwr48, powInfo[ixhi].twicePwr48);
	pNewPower->twicePwr54 = interpolate(chan->channel, clo, chi,
		powInfo[ixlo].twicePwr54, powInfo[ixhi].twicePwr54);
}

static RD_EDGES_POWER*
findEdgePower(struct ath_hal *ah, u_int ctl)
{
	int i;

	for (i = 0; i < _numCtls; i++)
		if (_ctl[i] == ctl)
			return &_rdEdgesPower[i * NUM_EDGES];
	return AH_NULL;
}

/*
 * Sets the transmit power in the baseband for the given
 * operating channel and mode.
 */
static HAL_BOOL
setRateTable(struct ath_hal *ah, HAL_CHANNEL *chan, 
		   int16_t tpcScaleReduction, int16_t powerLimit,
                   int16_t *pMinPower, int16_t *pMaxPower)
{
	u_int16_t ratesArray[16];
	u_int16_t *rpow = ratesArray;
	u_int16_t twiceMaxRDPower, twiceMaxEdgePower, twiceMaxEdgePowerCck;
	int8_t twiceAntennaGain, twiceAntennaReduction;
	TRGT_POWER_INFO targetPowerOfdm, targetPowerCck;
	RD_EDGES_POWER *rep;
	int16_t scaledPower;
	u_int8_t cfgCtl;

	twiceMaxRDPower = ath_hal_getchannelpower(ah, chan) * 2;
	*pMaxPower = -MAX_RATE_POWER;
	*pMinPower = MAX_RATE_POWER;

	/* Get conformance test limit maximum for this channel */
	cfgCtl = ath_hal_getctl(ah, chan);
	rep = findEdgePower(ah, cfgCtl);
	if (rep != AH_NULL)
		twiceMaxEdgePower = ar5212GetMaxEdgePower(chan->channel, rep);
	else
		twiceMaxEdgePower = MAX_RATE_POWER;

	if (IS_CHAN_G(chan)) {
		/* Check for a CCK CTL for 11G CCK powers */
		cfgCtl = (cfgCtl & 0xFC) | 0x01;
		rep = findEdgePower(ah, cfgCtl);
		if (rep != AH_NULL)
			twiceMaxEdgePowerCck = ar5212GetMaxEdgePower(chan->channel, rep);
		else
			twiceMaxEdgePowerCck = MAX_RATE_POWER;
	} else {
		/* Set the 11B cck edge power to the one found before */
		twiceMaxEdgePowerCck = twiceMaxEdgePower;
	}

	/* Get Antenna Gain reduction */
	if (IS_CHAN_5GHZ(chan)) {
		twiceAntennaGain = antennaGainMax[0];
	} else {
		twiceAntennaGain = antennaGainMax[1];
	}
	twiceAntennaReduction =
		ath_hal_getantennareduction(ah, chan, twiceAntennaGain);

	if (IS_CHAN_OFDM(chan)) {
		/* Get final OFDM target powers */
		if (IS_CHAN_G(chan)) { 
			/* TODO - add Turbo 2.4 to this mode check */
			ar5212GetTargetPowers(ah, chan, trgtPwr_11g,
				numTargetPwr_11g, &targetPowerOfdm);
		} else {
			ar5212GetTargetPowers(ah, chan, trgtPwr_11a,
				numTargetPwr_11a, &targetPowerOfdm);
		}

		/* Get Maximum OFDM power */
		/* Minimum of target and edge powers */
		scaledPower = AH_MIN(twiceMaxEdgePower,
				twiceMaxRDPower - twiceAntennaReduction);

		/*
		 * If turbo is set, reduce power to keep power
		 * consumption under 2 Watts.  Note that we always do
		 * this unless specially configured.  Then we limit
		 * power only for non-AP operation.
		 */
		if (IS_CHAN_TURBO(chan)
#ifdef AH_ENABLE_AP_SUPPORT
		    && AH_PRIVATE(ah)->ah_opmode != HAL_M_HOSTAP
#endif
		) {
			/*
			 * If turbo is set, reduce power to keep power
			 * consumption under 2 Watts
			 */
			if (eeversion >= AR_EEPROM_VER3_1)
				scaledPower = AH_MIN(scaledPower,
					turbo2WMaxPower5);
			/*
			 * EEPROM version 4.0 added an additional
			 * constraint on 2.4GHz channels.
			 */
			if (eeversion >= AR_EEPROM_VER4_0 &&
			    IS_CHAN_2GHZ(chan))
				scaledPower = AH_MIN(scaledPower,
					turbo2WMaxPower2);
		}
		/* Reduce power by max regulatory domain allowed restrictions */
		scaledPower -= (tpcScaleReduction * 2);
		scaledPower = (scaledPower < 0) ? 0 : scaledPower;
		scaledPower = AH_MIN(scaledPower, powerLimit);

		scaledPower = AH_MIN(scaledPower, targetPowerOfdm.twicePwr6_24);

		/* Set OFDM rates 9, 12, 18, 24, 36, 48, 54, XR */
		rpow[0] = rpow[1] = rpow[2] = rpow[3] = rpow[4] = scaledPower;
		rpow[5] = AH_MIN(rpow[0], targetPowerOfdm.twicePwr36);
		rpow[6] = AH_MIN(rpow[0], targetPowerOfdm.twicePwr48);
		rpow[7] = AH_MIN(rpow[0], targetPowerOfdm.twicePwr54);

#ifdef notyet
		if (eeversion >= AR_EEPROM_VER4_0) {
			/* Setup XR target power from EEPROM */
			rpow[15] = AH_MIN(scaledPower, IS_CHAN_2GHZ(chan) ?
				xrTargetPower2 : xrTargetPower5);
		} else {
			/* XR uses 6mb power */
			rpow[15] = rpow[0];
		}
#else
		rpow[15] = rpow[0];
#endif

		*pMinPower = rpow[7];
		*pMaxPower = rpow[0];

#if 0
		ahp->ah_ofdmTxPower = rpow[0];
#endif

		HALDEBUG(ah, "%s: MaxRD: %d TurboMax: %d MaxCTL: %d "
			"TPC_Reduction %d\n",
			__func__,
			twiceMaxRDPower, turbo2WMaxPower5,
			twiceMaxEdgePower, tpcScaleReduction * 2);
	}

	if (IS_CHAN_CCK(chan) || IS_CHAN_G(chan)) {
		/* Get final CCK target powers */
		ar5212GetTargetPowers(ah, chan, trgtPwr_11b,
			numTargetPwr_11b, &targetPowerCck);

		/* Reduce power by max regulatory domain allowed restrictions */
		scaledPower = AH_MIN(twiceMaxEdgePowerCck,
			twiceMaxRDPower - twiceAntennaReduction);

		scaledPower -= (tpcScaleReduction * 2);
		scaledPower = (scaledPower < 0) ? 0 : scaledPower;
		scaledPower = AH_MIN(scaledPower, powerLimit);

		rpow[8] = (scaledPower < 1) ? 1 : scaledPower;

		/* Set CCK rates 2L, 2S, 5.5L, 5.5S, 11L, 11S */
		rpow[8]  = AH_MIN(scaledPower, targetPowerCck.twicePwr6_24);
		rpow[9]  = AH_MIN(scaledPower, targetPowerCck.twicePwr36);
		rpow[10] = rpow[9];
		rpow[11] = AH_MIN(scaledPower, targetPowerCck.twicePwr48);
		rpow[12] = rpow[11];
		rpow[13] = AH_MIN(scaledPower, targetPowerCck.twicePwr54);
		rpow[14] = rpow[13];

		/* Set min/max power based off OFDM values or initialization */
		if (rpow[13] < *pMinPower)
		    *pMinPower = rpow[13];
		if (rpow[9] > *pMaxPower)
		    *pMaxPower = rpow[9];

	}
#if 0
	ahp->ah_tx6PowerInHalfDbm = *pMaxPower;
#endif
	return AH_TRUE;
}

void*
ath_hal_malloc(size_t size)
{
	return calloc(1, size);
}

void
ath_hal_free(void* p)
{
	return free(p);
}

void
ath_hal_vprintf(struct ath_hal *ah, const char* fmt, va_list ap)
{
	vprintf(fmt, ap);
}

void
ath_hal_printf(struct ath_hal *ah, const char* fmt, ...)
{
	va_list ap;
	va_start(ap, fmt);
	ath_hal_vprintf(ah, fmt, ap);
	va_end(ap);
}

void
HALDEBUG(struct ath_hal *ah, const char* fmt, ...)
{
	if (ath_hal_debug) {
		__va_list ap;
		va_start(ap, fmt);
		ath_hal_vprintf(ah, fmt, ap);
		va_end(ap);
	}
}

void
HALDEBUGn(struct ath_hal *ah, u_int level, const char* fmt, ...)
{
	if (ath_hal_debug >= level) {
		__va_list ap;
		va_start(ap, fmt);
		ath_hal_vprintf(ah, fmt, ap);
		va_end(ap);
	}
}